CutChart.

Diode Laser Settings by Material and Machine

Creality Falcon, Ortur and xTool document 253 speed and power settings on diode lasers. CutChart has not tested them; it read the makers’ documents from 2026-09-21 to 2026-10-02.

safety ↓ · sources ↓

Shopping for a diode laser? See the TwoTrees shop option.

253 documented rows match these filters.

Source-documented settings on diode lasers

About these numbers

Manufacturer-published reference parameters, not tested by CutChart

Speed: the figure the publisher printed, in bold, with the other unit converted under it. Type the number whose unit matches the speed box in your laser software. Not sure? Convert it here.

12 machines. Open one to see its settings.

D1 Pro 5W · Dunkelrote Acrylglasplatte (undurchsichtig, glänzend)

D1 Pro 5W, Dunkelrote Acrylglasplatte (undurchsichtig, glänzend): 2 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
D1 Pro 5W3 mmDunkelrote Acrylglasplatte (undurchsichtig, glänzend)cut1 mm/s = 60 mm/min100%3
  • Air assist: Not specified by xTool
  • Focus: Not specified by xTool
  • Lens: Not specified by xTool
xTool, read 2026-10-02. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
D1 Pro 5W3 mmDunkelrote Acrylglasplatte (undurchsichtig, glänzend)fill50 mm/s = 3000 mm/min100%1
  • Air assist: Not specified by xTool
  • Focus: Not specified by xTool
  • Lens: Not specified by xTool
  • Line interval: Not specified by xTool
xTool, read 2026-10-02. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

D1 Pro 5W · Kirschensperrholz

D1 Pro 5W, Kirschensperrholz: 1 row, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
D1 Pro 5W3 mmKirschensperrholzcut2 mm/s = 120 mm/min100%2
  • Air assist: Not specified by xTool
  • Focus: Not specified by xTool
  • Lens: Not specified by xTool
xTool, read 2026-10-02. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

D1 Pro 5W · Lindensperrholz

D1 Pro 5W, Lindensperrholz: 1 row, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
D1 Pro 5W3 mmLindensperrholzcut2 mm/s = 120 mm/min100%2
  • Air assist: Not specified by xTool
  • Focus: Not specified by xTool
  • Lens: Not specified by xTool
xTool, read 2026-10-02. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

These values are identical to D1 Pro 5W's Lindensperrholz table above: both makers' documents print the same numbers.

D1 Pro 5W · Walnusssperrholz

D1 Pro 5W, Walnusssperrholz: 1 row, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
D1 Pro 5W3 mmWalnusssperrholzcut4 mm/s = 240 mm/min100%3
  • Air assist: Not specified by xTool
  • Focus: Not specified by xTool
  • Lens: Not specified by xTool
xTool, read 2026-10-02. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

Every row: 3 mm

Not specified by xTool for any row here: air assist, focus and lens; line interval on fill rows.

Source: xTool, read 2026-10-02; reviewed 2026-09-21. Document: Materialeinstellungen für xTool Maschinen.

D1 Pro 10W · Birkensperrholz

D1 Pro 10W, Birkensperrholz: 3 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
D1 Pro 10W3 mmBirkensperrholzcut3 mm/s = 180 mm/min100%1
  • Air assist: Not specified by xTool
  • Focus: Not specified by xTool
  • Lens: Not specified by xTool
xTool, read 2026-10-02. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
D1 Pro 10W3 mmBirkensperrholzengrave30 mm/s = 1800 mm/min50%1
  • Air assist: Not specified by xTool
  • Focus: Not specified by xTool
  • Lens: Not specified by xTool
  • Line interval: Not specified by xTool
xTool, read 2026-10-02. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
D1 Pro 10W3 mmBirkensperrholzfill100 mm/s = 6000 mm/min80%1
  • Air assist: Not specified by xTool
  • Focus: Not specified by xTool
  • Lens: Not specified by xTool
  • Line interval: Not specified by xTool
xTool, read 2026-10-02. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

D1 Pro 10W · Dunkelrote Acrylglasplatte (undurchsichtig, glänzend)

D1 Pro 10W, Dunkelrote Acrylglasplatte (undurchsichtig, glänzend): 3 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
D1 Pro 10W3 mmDunkelrote Acrylglasplatte (undurchsichtig, glänzend)cut3 mm/s = 180 mm/min100%4
  • Air assist: Not specified by xTool
  • Focus: Not specified by xTool
  • Lens: Not specified by xTool
xTool, read 2026-10-02. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
D1 Pro 10W3 mmDunkelrote Acrylglasplatte (undurchsichtig, glänzend)engrave40 mm/s = 2400 mm/min40%1
  • Air assist: Not specified by xTool
  • Focus: Not specified by xTool
  • Lens: Not specified by xTool
  • Line interval: Not specified by xTool
xTool, read 2026-10-02. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
D1 Pro 10W3 mmDunkelrote Acrylglasplatte (undurchsichtig, glänzend)fill50 mm/s = 3000 mm/min80%1
  • Air assist: Not specified by xTool
  • Focus: Not specified by xTool
  • Lens: Not specified by xTool
  • Line interval: Not specified by xTool
xTool, read 2026-10-02. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

D1 Pro 10W · Kiefernsperrholz

D1 Pro 10W, Kiefernsperrholz: 1 row, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
D1 Pro 10W3 mmKiefernsperrholzcut4 mm/s = 240 mm/min100%2
  • Air assist: Not specified by xTool
  • Focus: Not specified by xTool
  • Lens: Not specified by xTool
xTool, read 2026-10-02. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

D1 Pro 10W · Lindensperrholz

D1 Pro 10W, Lindensperrholz: 2 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
D1 Pro 10W3 mmLindensperrholzcut3 mm/s = 180 mm/min100%2
  • Air assist: Not specified by xTool
  • Focus: Not specified by xTool
  • Lens: Not specified by xTool
xTool, read 2026-10-02. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
D1 Pro 10W6 mmLindensperrholzcut2 mm/s = 120 mm/min100%4
  • Air assist: Not specified by xTool
  • Focus: Not specified by xTool
  • Lens: Not specified by xTool
xTool, read 2026-10-02. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

D1 Pro 10W · Mahagonisperrholz

D1 Pro 10W, Mahagonisperrholz: 1 row, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
D1 Pro 10W3 mmMahagonisperrholzcut4 mm/s = 240 mm/min100%3
  • Air assist: Not specified by xTool
  • Focus: Not specified by xTool
  • Lens: Not specified by xTool
xTool, read 2026-10-02. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

These values are identical to the D1 Pro 5W table above: both makers' documents print the same numbers.

D1 Pro 10W · Mandschurisches Eschensperrholz

D1 Pro 10W, Mandschurisches Eschensperrholz: 1 row, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
D1 Pro 10W3 mmMandschurisches Eschensperrholzcut3 mm/s = 180 mm/min100%3
  • Air assist: Not specified by xTool
  • Focus: Not specified by xTool
  • Lens: Not specified by xTool
xTool, read 2026-10-02. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

D1 Pro 10W · Rote Acrylglasplatte (transparent, glänzend)

D1 Pro 10W, Rote Acrylglasplatte (transparent, glänzend): 3 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
D1 Pro 10W3 mmRote Acrylglasplatte (transparent, glänzend)cut3 mm/s = 180 mm/min100%4
  • Air assist: Not specified by xTool
  • Focus: Not specified by xTool
  • Lens: Not specified by xTool
xTool, read 2026-10-02. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
D1 Pro 10W3 mmRote Acrylglasplatte (transparent, glänzend)engrave50 mm/s = 3000 mm/min40%1
  • Air assist: Not specified by xTool
  • Focus: Not specified by xTool
  • Lens: Not specified by xTool
  • Line interval: Not specified by xTool
xTool, read 2026-10-02. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
D1 Pro 10W3 mmRote Acrylglasplatte (transparent, glänzend)fill50 mm/s = 3000 mm/min60%1
  • Air assist: Not specified by xTool
  • Focus: Not specified by xTool
  • Lens: Not specified by xTool
  • Line interval: Not specified by xTool
xTool, read 2026-10-02. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

D1 Pro 10W · Walnusssperrholz

D1 Pro 10W, Walnusssperrholz: 4 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
D1 Pro 10W3 mmWalnusssperrholzcut3 mm/s = 180 mm/min100%1
  • Air assist: Not specified by xTool
  • Focus: Not specified by xTool
  • Lens: Not specified by xTool
xTool, read 2026-10-02. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
D1 Pro 10W6 mmWalnusssperrholzcut60 mm/s = 3600 mm/min80%1
  • Air assist: Not specified by xTool
  • Focus: Not specified by xTool
  • Lens: Not specified by xTool
xTool, read 2026-10-02. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
D1 Pro 10W3 mmWalnusssperrholzengrave30 mm/s = 1800 mm/min50%1
  • Air assist: Not specified by xTool
  • Focus: Not specified by xTool
  • Lens: Not specified by xTool
  • Line interval: Not specified by xTool
xTool, read 2026-10-02. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
D1 Pro 10W3 mmWalnusssperrholzfill100 mm/s = 6000 mm/min80%1
  • Air assist: Not specified by xTool
  • Focus: Not specified by xTool
  • Lens: Not specified by xTool
  • Line interval: Not specified by xTool
xTool, read 2026-10-02. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

D1 Pro 10W · White oak plywood

D1 Pro 10W, White oak plywood: 1 row, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
D1 Pro 10W3 mmWhite oak plywoodcut3 mm/s = 180 mm/min100%2
  • Air assist: Not specified by xTool
  • Focus: Not specified by xTool
  • Lens: Not specified by xTool
xTool, read 2026-10-02. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

Not specified by xTool for any row here: air assist, focus and lens; line interval on fill and engrave rows.

Source: xTool, read 2026-10-02; reviewed 2026-09-21. Document: Materialeinstellungen für xTool Maschinen.

D1 Pro 20W · Birkensperrholz

D1 Pro 20W, Birkensperrholz: 2 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
D1 Pro 20W3 mmBirkensperrholzcut6 mm/s = 360 mm/min100%1
  • Air assist: Not specified by xTool
  • Focus: Not specified by xTool
  • Lens: Not specified by xTool
xTool, read 2026-10-02. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
D1 Pro 20W6 mmBirkensperrholzcut4 mm/s = 240 mm/min100%3
  • Air assist: Not specified by xTool
  • Focus: Not specified by xTool
  • Lens: Not specified by xTool
xTool, read 2026-10-02. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

D1 Pro 20W · Braune Acrylglasplatte undurchsichtig glänzend

D1 Pro 20W, Braune Acrylglasplatte undurchsichtig glänzend: 3 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
D1 Pro 20W2 mmBraune Acrylglasplatte undurchsichtig glänzendcut5 mm/s = 300 mm/min100%3
  • Air assist: Not specified by xTool
  • Focus: Not specified by xTool
  • Lens: Not specified by xTool
xTool, read 2026-10-02. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
D1 Pro 20W2 mmBraune Acrylglasplatte undurchsichtig glänzendengrave40 mm/s = 2400 mm/min50%1
  • Air assist: Not specified by xTool
  • Focus: Not specified by xTool
  • Lens: Not specified by xTool
  • Line interval: Not specified by xTool
xTool, read 2026-10-02. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
D1 Pro 20W2 mmBraune Acrylglasplatte undurchsichtig glänzendfill50 mm/s = 3000 mm/min40%1
  • Air assist: Not specified by xTool
  • Focus: Not specified by xTool
  • Lens: Not specified by xTool
  • Line interval: Not specified by xTool
xTool, read 2026-10-02. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

D1 Pro 20W · Dunkelrote Acrylglasplatte (undurchsichtig, glänzend)

D1 Pro 20W, Dunkelrote Acrylglasplatte (undurchsichtig, glänzend): 3 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
D1 Pro 20W3 mmDunkelrote Acrylglasplatte (undurchsichtig, glänzend)cut3 mm/s = 180 mm/min100%3
  • Air assist: Not specified by xTool
  • Focus: Not specified by xTool
  • Lens: Not specified by xTool
xTool, read 2026-10-02. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
D1 Pro 20W3 mmDunkelrote Acrylglasplatte (undurchsichtig, glänzend)engrave40 mm/s = 2400 mm/min30%1
  • Air assist: Not specified by xTool
  • Focus: Not specified by xTool
  • Lens: Not specified by xTool
  • Line interval: Not specified by xTool
xTool, read 2026-10-02. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
D1 Pro 20W3 mmDunkelrote Acrylglasplatte (undurchsichtig, glänzend)fill50 mm/s = 3000 mm/min40%1
  • Air assist: Not specified by xTool
  • Focus: Not specified by xTool
  • Lens: Not specified by xTool
  • Line interval: Not specified by xTool
xTool, read 2026-10-02. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

D1 Pro 20W · Kiefernsperrholz

D1 Pro 20W, Kiefernsperrholz: 1 row, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
D1 Pro 20W3 mmKiefernsperrholzcut5 mm/s = 300 mm/min100%1
  • Air assist: Not specified by xTool
  • Focus: Not specified by xTool
  • Lens: Not specified by xTool
xTool, read 2026-10-02. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

D1 Pro 20W · Lindensperrholz

D1 Pro 20W, Lindensperrholz: 4 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
D1 Pro 20W3 mmLindensperrholzcut6 mm/s = 360 mm/min100%1
  • Air assist: Not specified by xTool
  • Focus: Not specified by xTool
  • Lens: Not specified by xTool
xTool, read 2026-10-02. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
D1 Pro 20W6 mmLindensperrholzcut6 mm/s = 360 mm/min100%3
  • Air assist: Not specified by xTool
  • Focus: Not specified by xTool
  • Lens: Not specified by xTool
xTool, read 2026-10-02. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
D1 Pro 20W3 mmLindensperrholzengrave60 mm/s = 3600 mm/min80%1
  • Air assist: Not specified by xTool
  • Focus: Not specified by xTool
  • Lens: Not specified by xTool
  • Line interval: Not specified by xTool
xTool, read 2026-10-02. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
D1 Pro 20W3 mmLindensperrholzfill100 mm/s = 6000 mm/min60%1
  • Air assist: Not specified by xTool
  • Focus: Not specified by xTool
  • Lens: Not specified by xTool
  • Line interval: Not specified by xTool
xTool, read 2026-10-02. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

D1 Pro 20W · Mahagonisperrholz

D1 Pro 20W, Mahagonisperrholz: 1 row, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
D1 Pro 20W3 mmMahagonisperrholzcut6 mm/s = 360 mm/min100%1
  • Air assist: Not specified by xTool
  • Focus: Not specified by xTool
  • Lens: Not specified by xTool
xTool, read 2026-10-02. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

D1 Pro 20W · Mandschurisches Eschensperrholz

D1 Pro 20W, Mandschurisches Eschensperrholz: 1 row, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
D1 Pro 20W3 mmMandschurisches Eschensperrholzcut4 mm/s = 240 mm/min100%1
  • Air assist: Not specified by xTool
  • Focus: Not specified by xTool
  • Lens: Not specified by xTool
xTool, read 2026-10-02. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

D1 Pro 20W · Rote Acrylglasplatte (transparent, glänzend)

D1 Pro 20W, Rote Acrylglasplatte (transparent, glänzend): 3 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
D1 Pro 20W3 mmRote Acrylglasplatte (transparent, glänzend)cut3 mm/s = 180 mm/min100%3
  • Air assist: Not specified by xTool
  • Focus: Not specified by xTool
  • Lens: Not specified by xTool
xTool, read 2026-10-02. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
D1 Pro 20W3 mmRote Acrylglasplatte (transparent, glänzend)engrave40 mm/s = 2400 mm/min30%1
  • Air assist: Not specified by xTool
  • Focus: Not specified by xTool
  • Lens: Not specified by xTool
  • Line interval: Not specified by xTool
xTool, read 2026-10-02. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
D1 Pro 20W3 mmRote Acrylglasplatte (transparent, glänzend)fill100 mm/s = 6000 mm/min60%1
  • Air assist: Not specified by xTool
  • Focus: Not specified by xTool
  • Lens: Not specified by xTool
  • Line interval: Not specified by xTool
xTool, read 2026-10-02. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

D1 Pro 20W · Walnusssperrholz

D1 Pro 20W, Walnusssperrholz: 2 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
D1 Pro 20W3 mmWalnusssperrholzcut4 mm/s = 240 mm/min100%1
  • Air assist: Not specified by xTool
  • Focus: Not specified by xTool
  • Lens: Not specified by xTool
xTool, read 2026-10-02. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
D1 Pro 20W6 mmWalnusssperrholzcut60 mm/s = 3600 mm/min80%1
  • Air assist: Not specified by xTool
  • Focus: Not specified by xTool
  • Lens: Not specified by xTool
xTool, read 2026-10-02. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

D1 Pro 20W · White oak plywood

D1 Pro 20W, White oak plywood: 1 row, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
D1 Pro 20W3 mmWhite oak plywoodcut5 mm/s = 300 mm/min100%1
  • Air assist: Not specified by xTool
  • Focus: Not specified by xTool
  • Lens: Not specified by xTool
xTool, read 2026-10-02. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

These values are identical to D1 Pro 20W's White oak plywood table above: both makers' documents print the same numbers.

Not specified by xTool for any row here: air assist, focus and lens; line interval on fill and engrave rows.

Source: xTool, read 2026-10-02; reviewed 2026-09-21. Document: Materialeinstellungen für xTool Maschinen.

D1 Pro 40W · Blutrotes Acrylglas

D1 Pro 40W, Blutrotes Acrylglas: 1 row, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
D1 Pro 40W3 mmBlutrotes Acrylglascut5 mm/s = 300 mm/min100%1
  • Air assist: Not specified by xTool
  • Focus: Not specified by xTool
  • Lens: Not specified by xTool
xTool, read 2026-10-02. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

These values are identical to the D1 Pro 20W table above: both makers' documents print the same numbers.

D1 Pro 40W · Kiefernsperrholz

D1 Pro 40W, Kiefernsperrholz: 1 row, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
D1 Pro 40W3 mmKiefernsperrholzcut12 mm/s = 720 mm/min100%1
  • Air assist: Not specified by xTool
  • Focus: Not specified by xTool
  • Lens: Not specified by xTool
xTool, read 2026-10-02. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

D1 Pro 40W · Kirschensperrholz

D1 Pro 40W, Kirschensperrholz: 1 row, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
D1 Pro 40W3 mmKirschensperrholzcut12 mm/s = 720 mm/min100%1
  • Air assist: Not specified by xTool
  • Focus: Not specified by xTool
  • Lens: Not specified by xTool
xTool, read 2026-10-02. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

These values are identical to D1 Pro 40W's Kirschensperrholz table above: both makers' documents print the same numbers.

D1 Pro 40W · Kraftpapier

D1 Pro 40W, Kraftpapier: 1 row, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
D1 Pro 40W0.23 mmKraftpapiercut60 mm/s = 3600 mm/min60%1
  • Air assist: Not specified by xTool
  • Focus: Not specified by xTool
  • Lens: Not specified by xTool
xTool, read 2026-10-02. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

D1 Pro 40W · Lindensperrholz

D1 Pro 40W, Lindensperrholz: 2 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
D1 Pro 40W3 mmLindensperrholzcut13 mm/s = 780 mm/min100%1
  • Air assist: Not specified by xTool
  • Focus: Not specified by xTool
  • Lens: Not specified by xTool
xTool, read 2026-10-02. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
D1 Pro 40W8 mmLindensperrholzcut6 mm/s = 360 mm/min100%1
  • Air assist: Not specified by xTool
  • Focus: Not specified by xTool
  • Lens: Not specified by xTool
xTool, read 2026-10-02. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

D1 Pro 40W · Mandschurisches Eschensperrholz

D1 Pro 40W, Mandschurisches Eschensperrholz: 1 row, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
D1 Pro 40W3 mmMandschurisches Eschensperrholzcut12 mm/s = 720 mm/min100%1
  • Air assist: Not specified by xTool
  • Focus: Not specified by xTool
  • Lens: Not specified by xTool
xTool, read 2026-10-02. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

These values are identical to D1 Pro 40W's Mandschurisches Eschensperrholz table above: both makers' documents print the same numbers.

D1 Pro 40W · Schwarzes Acrylglas

D1 Pro 40W, Schwarzes Acrylglas: 1 row, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
D1 Pro 40W3 mmSchwarzes Acrylglascut5 mm/s = 300 mm/min100%1
  • Air assist: Not specified by xTool
  • Focus: Not specified by xTool
  • Lens: Not specified by xTool
xTool, read 2026-10-02. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

These values are identical to the D1 Pro 20W table above: both makers' documents print the same numbers.

D1 Pro 40W · Walnusssperrholz

D1 Pro 40W, Walnusssperrholz: 1 row, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
D1 Pro 40W3 mmWalnusssperrholzcut12 mm/s = 720 mm/min100%1
  • Air assist: Not specified by xTool
  • Focus: Not specified by xTool
  • Lens: Not specified by xTool
xTool, read 2026-10-02. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

These values are identical to D1 Pro 40W's Walnusssperrholz table above: both makers' documents print the same numbers.

Every row: cut · 1 pass

Not specified by xTool for any row here: air assist, focus and lens.

Source: xTool, read 2026-10-02; reviewed 2026-09-21. Document: Materialeinstellungen für xTool Maschinen.

Falcon2 12W · Anodized Aluminum

Falcon2 12W, Anodized Aluminum: 1 row, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 12W3 mmAnodized Aluminumengrave250 mm/min (4.17 mm/s)100%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
  • Line interval: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

Falcon2 12W · Bamboo

Falcon2 12W, Bamboo: 2 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 12W3 mmBamboocut280 mm/min (4.67 mm/s)100%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 12W3 mmBambooengrave4000 mm/min (66.67 mm/s)40%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
  • Line interval: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

Falcon2 12W · Basswood

Falcon2 12W, Basswood: 6 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 12W2 mmBasswoodcut400 mm/min (6.67 mm/s)100%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 12W3 mmBasswoodcut300 mm/min (5 mm/s)100%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 12W5 mmBasswoodcut200 mm/min (3.33 mm/s)100%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 12W8 mmBasswoodcut250 mm/min (4.17 mm/s)100%2
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 12W10 mmBasswoodcut180 mm/min (3 mm/s)100%3
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 12W2 mmBasswoodengrave4000 mm/min (66.67 mm/s)40%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
  • Line interval: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

Falcon2 12W · Black Acrylic

Falcon2 12W, Black Acrylic: 2 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 12W4.6 mmBlack Acryliccut300 mm/min (5 mm/s)100%2
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 12W7.6 mmBlack Acryliccut250 mm/min (4.17 mm/s)100%3
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

Falcon2 12W · Black Frosted Acrylic

Falcon2 12W, Black Frosted Acrylic: 2 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 12W3 mmBlack Frosted Acryliccut200 mm/min (3.33 mm/s)95%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 12W3 mmBlack Frosted Acrylicengrave3000 mm/min (50 mm/s)80%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
  • Line interval: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

Falcon2 12W · Black Opaque Glossy Acrylic

Falcon2 12W, Black Opaque Glossy Acrylic: 1 row, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 12W3 mmBlack Opaque Glossy Acrylicengrave4000 mm/min (66.67 mm/s)80%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
  • Line interval: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

Falcon2 12W · Brown Leather

Falcon2 12W, Brown Leather: 2 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 12W0.65 mmBrown Leathercut2000 mm/min (33.33 mm/s)100%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 12W0.65 mmBrown Leatherengrave4000 mm/min (66.67 mm/s)20%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
  • Line interval: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

Falcon2 12W · Brushed Stainless Steel

Falcon2 12W, Brushed Stainless Steel: 1 row, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 12W2 mmBrushed Stainless Steelengrave800 mm/min (13.33 mm/s)100%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
  • Line interval: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

Falcon2 12W · Green Frosted Acrylic

Falcon2 12W, Green Frosted Acrylic: 2 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 12W3 mmGreen Frosted Acryliccut120 mm/min (2 mm/s)95%3
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 12W3 mmGreen Frosted Acrylicengrave1200 mm/min (20 mm/s)90%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
  • Line interval: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

Falcon2 12W · Green Opaque Glossy Acrylic

Falcon2 12W, Green Opaque Glossy Acrylic: 2 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 12W3 mmGreen Opaque Glossy Acryliccut120 mm/min (2 mm/s)95%3
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 12W3 mmGreen Opaque Glossy Acrylicengrave4000 mm/min (66.67 mm/s)50%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
  • Line interval: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

Falcon2 12W · Green Transparent Acrylic

Falcon2 12W, Green Transparent Acrylic: 2 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 12W3 mmGreen Transparent Acryliccut120 mm/min (2 mm/s)95%3
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 12W3 mmGreen Transparent Acrylicengrave3000 mm/min (50 mm/s)40%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
  • Line interval: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

Falcon2 12W · Kraft Paper

Falcon2 12W, Kraft Paper: 2 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 12W0.2 mmKraft Papercut4000 mm/min (66.67 mm/s)100%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 12W0.15 mmKraft Paperengrave4000 mm/min (66.67 mm/s)15%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
  • Line interval: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

Falcon2 12W · Orange Frosted Acrylic

Falcon2 12W, Orange Frosted Acrylic: 2 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 12W3 mmOrange Frosted Acryliccut120 mm/min (2 mm/s)95%3
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 12W3 mmOrange Frosted Acrylicengrave1200 mm/min (20 mm/s)90%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
  • Line interval: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

These values are identical to Falcon2 12W's Orange Frosted Acrylic table above: both makers' documents print the same numbers.

Falcon2 12W · Orange Opaque Glossy Acrylic

Falcon2 12W, Orange Opaque Glossy Acrylic: 2 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 12W3 mmOrange Opaque Glossy Acryliccut120 mm/min (2 mm/s)95%2
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 12W3 mmOrange Opaque Glossy Acrylicengrave4000 mm/min (66.67 mm/s)50%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
  • Line interval: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

Falcon2 12W · Purple Frosted Acrylic

Falcon2 12W, Purple Frosted Acrylic: 2 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 12W3 mmPurple Frosted Acryliccut120 mm/min (2 mm/s)95%3
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 12W3 mmPurple Frosted Acrylicengrave1000 mm/min (16.67 mm/s)90%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
  • Line interval: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

Falcon2 12W · Purple Opaque Glossy Acrylic

Falcon2 12W, Purple Opaque Glossy Acrylic: 2 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 12W3 mmPurple Opaque Glossy Acryliccut120 mm/min (2 mm/s)95%2
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 12W3 mmPurple Opaque Glossy Acrylicengrave4000 mm/min (66.67 mm/s)50%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
  • Line interval: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

These values are identical to Falcon2 12W's Purple Opaque Glossy Acrylic table above: both makers' documents print the same numbers.

Falcon2 12W · Red Card Paper

Falcon2 12W, Red Card Paper: 2 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 12W0.2 mmRed Card Papercut4000 mm/min (66.67 mm/s)100%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 12W0.2 mmRed Card Paperengrave4000 mm/min (66.67 mm/s)15%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
  • Line interval: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

Falcon2 12W · Red Felt

Falcon2 12W, Red Felt: 2 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 12W0.8 mmRed Feltcut3800 mm/min (63.33 mm/s)100%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 12W0.8 mmRed Feltengrave4000 mm/min (66.67 mm/s)15%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
  • Line interval: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

Falcon2 12W · Red Opaque Glossy Acrylic

Falcon2 12W, Red Opaque Glossy Acrylic: 2 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 12W3 mmRed Opaque Glossy Acryliccut120 mm/min (2 mm/s)95%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 12W3 mmRed Opaque Glossy Acrylicengrave4000 mm/min (66.67 mm/s)50%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
  • Line interval: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

Falcon2 12W · Red Transparent Acrylic

Falcon2 12W, Red Transparent Acrylic: 2 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 12W3 mmRed Transparent Acryliccut120 mm/min (2 mm/s)95%3
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 12W3 mmRed Transparent Acrylicengrave3000 mm/min (50 mm/s)40%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
  • Line interval: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

These values are identical to Falcon2 12W's Red Transparent Acrylic table above: both makers' documents print the same numbers.

Falcon2 12W · Rosewood Plywood

Falcon2 12W, Rosewood Plywood: 3 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 12W3 mmRosewood Plywoodcut280 mm/min (4.67 mm/s)100%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 12W5 mmRosewood Plywoodcut150 mm/min (2.5 mm/s)100%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 12W3 mmRosewood Plywoodengrave4000 mm/min (66.67 mm/s)35%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
  • Line interval: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

Falcon2 12W · Walnut Plywood

Falcon2 12W, Walnut Plywood: 3 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 12W3 mmWalnut Plywoodcut280 mm/min (4.67 mm/s)100%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 12W5 mmWalnut Plywoodcut150 mm/min (2.5 mm/s)100%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 12W3 mmWalnut Plywoodengrave4000 mm/min (66.67 mm/s)35%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
  • Line interval: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

These values are identical to Falcon2 12W's Walnut Plywood table above: both makers' documents print the same numbers.

Falcon2 12W · White Tile Painted Black

Falcon2 12W, White Tile Painted Black: 1 row, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 12W6 mmWhite Tile Painted Blackengrave4000 mm/min (66.67 mm/s)85%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
  • Line interval: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

Falcon2 12W · Yellow Transparent Acrylic

Falcon2 12W, Yellow Transparent Acrylic: 2 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 12W3 mmYellow Transparent Acryliccut120 mm/min (2 mm/s)95%2
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 12W3 mmYellow Transparent Acrylicengrave3000 mm/min (50 mm/s)40%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
  • Line interval: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

Not specified by Creality Falcon for any row here: air assist, focus and lens; line interval on engrave rows.

Source: Creality Falcon, read 2026-09-21; reviewed 2026-09-21. Document: CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings.

Falcon2 22W · Anodized Aluminum

Falcon2 22W, Anodized Aluminum: 1 row, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 22W3 mmAnodized Aluminumengrave6000 mm/min (100 mm/s)60%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
  • Line interval: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

Falcon2 22W · Bamboo

Falcon2 22W, Bamboo: 2 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 22W3 mmBamboocut450 mm/min (7.5 mm/s)100%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 22W3 mmBambooengrave6000 mm/min (100 mm/s)40%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
  • Line interval: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

Falcon2 22W · Basswood

Falcon2 22W, Basswood: 6 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 22W2 mmBasswoodcut700 mm/min (11.67 mm/s)100%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 22W3 mmBasswoodcut550 mm/min (9.17 mm/s)100%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 22W5 mmBasswoodcut400 mm/min (6.67 mm/s)100%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 22W8 mmBasswoodcut240 mm/min (4 mm/s)100%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 22W10 mmBasswoodcut120 mm/min (2 mm/s)100%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 22W2 mmBasswoodengrave6000 mm/min (100 mm/s)40%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
  • Line interval: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

Falcon2 22W · Black Acrylic

Falcon2 22W, Black Acrylic: 2 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 22W4.6 mmBlack Acryliccut120 mm/min (2 mm/s)100%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 22W7.6 mmBlack Acryliccut120 mm/min (2 mm/s)100%2
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

Falcon2 22W · Black Frosted Acrylic

Falcon2 22W, Black Frosted Acrylic: 2 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 22W3 mmBlack Frosted Acryliccut180 mm/min (3 mm/s)55%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 22W3 mmBlack Frosted Acrylicengrave3000 mm/min (50 mm/s)40%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
  • Line interval: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

Falcon2 22W · Black Opaque Glossy Acrylic

Falcon2 22W, Black Opaque Glossy Acrylic: 1 row, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 22W3 mmBlack Opaque Glossy Acrylicengrave4000 mm/min (66.67 mm/s)50%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
  • Line interval: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

Falcon2 22W · Brown Leather

Falcon2 22W, Brown Leather: 2 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 22W0.65 mmBrown Leathercut2000 mm/min (33.33 mm/s)100%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 22W0.65 mmBrown Leatherengrave6000 mm/min (100 mm/s)18%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
  • Line interval: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

Falcon2 22W · Brushed Stainless Steel

Falcon2 22W, Brushed Stainless Steel: 1 row, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 22W2 mmBrushed Stainless Steelengrave6000 mm/min (100 mm/s)80%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
  • Line interval: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

Falcon2 22W · Green Frosted Acrylic

Falcon2 22W, Green Frosted Acrylic: 2 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 22W3 mmGreen Frosted Acryliccut120 mm/min (2 mm/s)55%3
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 22W3 mmGreen Frosted Acrylicengrave1200 mm/min (20 mm/s)60%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
  • Line interval: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

Falcon2 22W · Green Opaque Glossy Acrylic

Falcon2 22W, Green Opaque Glossy Acrylic: 2 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 22W3 mmGreen Opaque Glossy Acryliccut120 mm/min (2 mm/s)55%3
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 22W3 mmGreen Opaque Glossy Acrylicengrave6000 mm/min (100 mm/s)50%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
  • Line interval: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

Falcon2 22W · Green Transparent Acrylic

Falcon2 22W, Green Transparent Acrylic: 2 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 22W3 mmGreen Transparent Acryliccut120 mm/min (2 mm/s)55%3
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 22W3 mmGreen Transparent Acrylicengrave3000 mm/min (50 mm/s)20%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
  • Line interval: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

Falcon2 22W · Kraft Paper

Falcon2 22W, Kraft Paper: 2 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 22W0.2 mmKraft Papercut4000 mm/min (66.67 mm/s)80%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 22W0.15 mmKraft Paperengrave6000 mm/min (100 mm/s)18%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
  • Line interval: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

Falcon2 22W · Orange Frosted Acrylic

Falcon2 22W, Orange Frosted Acrylic: 2 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 22W3 mmOrange Frosted Acryliccut120 mm/min (2 mm/s)55%3
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 22W3 mmOrange Frosted Acrylicengrave1200 mm/min (20 mm/s)60%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
  • Line interval: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

These values are identical to Falcon2 22W's Orange Frosted Acrylic table above: both makers' documents print the same numbers.

Falcon2 22W · Orange Opaque Glossy Acrylic

Falcon2 22W, Orange Opaque Glossy Acrylic: 2 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 22W3 mmOrange Opaque Glossy Acryliccut120 mm/min (2 mm/s)55%2
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 22W3 mmOrange Opaque Glossy Acrylicengrave6000 mm/min (100 mm/s)50%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
  • Line interval: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

Falcon2 22W · Purple Frosted Acrylic

Falcon2 22W, Purple Frosted Acrylic: 2 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 22W3 mmPurple Frosted Acryliccut120 mm/min (2 mm/s)55%3
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 22W3 mmPurple Frosted Acrylicengrave1000 mm/min (16.67 mm/s)60%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
  • Line interval: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

Falcon2 22W · Purple Opaque Glossy Acrylic

Falcon2 22W, Purple Opaque Glossy Acrylic: 2 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 22W3 mmPurple Opaque Glossy Acryliccut120 mm/min (2 mm/s)55%2
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 22W3 mmPurple Opaque Glossy Acrylicengrave6000 mm/min (100 mm/s)50%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
  • Line interval: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

These values are identical to Falcon2 22W's Purple Opaque Glossy Acrylic table above: both makers' documents print the same numbers.

Falcon2 22W · Red Card Paper

Falcon2 22W, Red Card Paper: 2 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 22W0.2 mmRed Card Papercut4000 mm/min (66.67 mm/s)50%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 22W0.2 mmRed Card Paperengrave6000 mm/min (100 mm/s)15%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
  • Line interval: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

Falcon2 22W · Red Felt

Falcon2 22W, Red Felt: 2 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 22W0.8 mmRed Feltcut4000 mm/min (66.67 mm/s)55%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 22W0.8 mmRed Feltengrave6000 mm/min (100 mm/s)13%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
  • Line interval: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

Falcon2 22W · Red Opaque Glossy Acrylic

Falcon2 22W, Red Opaque Glossy Acrylic: 2 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 22W3 mmRed Opaque Glossy Acryliccut120 mm/min (2 mm/s)55%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 22W3 mmRed Opaque Glossy Acrylicengrave6000 mm/min (100 mm/s)50%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
  • Line interval: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

Falcon2 22W · Red Transparent Acrylic

Falcon2 22W, Red Transparent Acrylic: 2 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 22W3 mmRed Transparent Acryliccut120 mm/min (2 mm/s)55%3
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 22W3 mmRed Transparent Acrylicengrave3000 mm/min (50 mm/s)20%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
  • Line interval: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

These values are identical to Falcon2 22W's Red Transparent Acrylic table above: both makers' documents print the same numbers.

Falcon2 22W · Rosewood Plywood

Falcon2 22W, Rosewood Plywood: 3 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 22W3 mmRosewood Plywoodcut450 mm/min (7.5 mm/s)100%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 22W5 mmRosewood Plywoodcut350 mm/min (5.83 mm/s)100%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 22W3 mmRosewood Plywoodengrave6000 mm/min (100 mm/s)35%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
  • Line interval: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

Falcon2 22W · Walnut Plywood

Falcon2 22W, Walnut Plywood: 3 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 22W3 mmWalnut Plywoodcut450 mm/min (7.5 mm/s)100%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 22W5 mmWalnut Plywoodcut350 mm/min (5.83 mm/s)100%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 22W3 mmWalnut Plywoodengrave6000 mm/min (100 mm/s)35%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
  • Line interval: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

These values are identical to Falcon2 22W's Walnut Plywood table above: both makers' documents print the same numbers.

Falcon2 22W · White Tile Painted Black

Falcon2 22W, White Tile Painted Black: 1 row, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 22W6 mmWhite Tile Painted Blackengrave4000 mm/min (66.67 mm/s)50%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
  • Line interval: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

Falcon2 22W · Yellow Transparent Acrylic

Falcon2 22W, Yellow Transparent Acrylic: 2 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 22W3 mmYellow Transparent Acryliccut120 mm/min (2 mm/s)55%2
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 22W3 mmYellow Transparent Acrylicengrave3000 mm/min (50 mm/s)20%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
  • Line interval: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

Not specified by Creality Falcon for any row here: air assist, focus and lens; line interval on engrave rows.

Source: Creality Falcon, read 2026-09-21; reviewed 2026-09-21. Document: CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings.

Falcon2 40W (Normal mode) · Anodized Aluminum

Falcon2 40W (Normal mode), Anodized Aluminum: 1 row, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 40W (Normal mode)3 mmAnodized Aluminumengrave6000 mm/min (100 mm/s)30%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
  • Line interval: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

Falcon2 40W (Normal mode) · Bamboo

Falcon2 40W (Normal mode), Bamboo: 2 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 40W (Normal mode)5 mmBamboocut800 mm/min (13.33 mm/s)100%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 40W (Normal mode)3 mmBambooengrave6000 mm/min (100 mm/s)25%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
  • Line interval: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

Falcon2 40W (Normal mode) · Basswood

Falcon2 40W (Normal mode), Basswood: 7 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 40W (Normal mode)2 mmBasswoodcut1000 mm/min (16.67 mm/s)100%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 40W (Normal mode)3 mmBasswoodcut850 mm/min (14.17 mm/s)100%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 40W (Normal mode)5 mmBasswoodcut700 mm/min (11.67 mm/s)100%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 40W (Normal mode)8 mmBasswoodcut400 mm/min (6.67 mm/s)100%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 40W (Normal mode)10 mmBasswoodcut300 mm/min (5 mm/s)100%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 40W (Normal mode)15 mmBasswoodcut150 mm/min (2.5 mm/s)100%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 40W (Normal mode)2 mmBasswoodengrave6000 mm/min (100 mm/s)25%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
  • Line interval: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

Falcon2 40W (Normal mode) · Black Acrylic

Falcon2 40W (Normal mode), Black Acrylic: 2 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 40W (Normal mode)4.6 mmBlack Acryliccut180 mm/min (3 mm/s)100%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 40W (Normal mode)7.6 mmBlack Acryliccut120 mm/min (2 mm/s)100%2
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

Falcon2 40W (Normal mode) · Black Frosted Acrylic

Falcon2 40W (Normal mode), Black Frosted Acrylic: 2 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 40W (Normal mode)3 mmBlack Frosted Acryliccut180 mm/min (3 mm/s)30%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 40W (Normal mode)3 mmBlack Frosted Acrylicengrave3000 mm/min (50 mm/s)22%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
  • Line interval: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

Falcon2 40W (Normal mode) · Black Opaque Glossy Acrylic

Falcon2 40W (Normal mode), Black Opaque Glossy Acrylic: 1 row, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 40W (Normal mode)3 mmBlack Opaque Glossy Acrylicengrave4000 mm/min (66.67 mm/s)26%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
  • Line interval: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

Falcon2 40W (Normal mode) · Brown Leather

Falcon2 40W (Normal mode), Brown Leather: 2 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 40W (Normal mode)0.65 mmBrown Leathercut4000 mm/min (66.67 mm/s)70%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 40W (Normal mode)0.65 mmBrown Leatherengrave6000 mm/min (100 mm/s)12%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
  • Line interval: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

Falcon2 40W (Normal mode) · Brushed Stainless Steel

Falcon2 40W (Normal mode), Brushed Stainless Steel: 1 row, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 40W (Normal mode)2 mmBrushed Stainless Steelengrave6000 mm/min (100 mm/s)40%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
  • Line interval: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

Falcon2 40W (Normal mode) · Green Frosted Acrylic

Falcon2 40W (Normal mode), Green Frosted Acrylic: 2 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 40W (Normal mode)3 mmGreen Frosted Acryliccut120 mm/min (2 mm/s)30%3
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 40W (Normal mode)3 mmGreen Frosted Acrylicengrave1200 mm/min (20 mm/s)30%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
  • Line interval: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

Falcon2 40W (Normal mode) · Green Opaque Glossy Acrylic

Falcon2 40W (Normal mode), Green Opaque Glossy Acrylic: 2 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 40W (Normal mode)3 mmGreen Opaque Glossy Acryliccut120 mm/min (2 mm/s)30%3
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 40W (Normal mode)3 mmGreen Opaque Glossy Acrylicengrave6000 mm/min (100 mm/s)26%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
  • Line interval: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

Falcon2 40W (Normal mode) · Green Transparent Acrylic

Falcon2 40W (Normal mode), Green Transparent Acrylic: 2 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 40W (Normal mode)3 mmGreen Transparent Acryliccut120 mm/min (2 mm/s)30%3
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 40W (Normal mode)3 mmGreen Transparent Acrylicengrave3000 mm/min (50 mm/s)12%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
  • Line interval: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

Falcon2 40W (Normal mode) · Kraft Paper

Falcon2 40W (Normal mode), Kraft Paper: 2 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 40W (Normal mode)0.2 mmKraft Papercut4000 mm/min (66.67 mm/s)40%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 40W (Normal mode)0.15 mmKraft Paperengrave6000 mm/min (100 mm/s)12%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
  • Line interval: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

Falcon2 40W (Normal mode) · Orange Frosted Acrylic

Falcon2 40W (Normal mode), Orange Frosted Acrylic: 2 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 40W (Normal mode)3 mmOrange Frosted Acryliccut120 mm/min (2 mm/s)30%3
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 40W (Normal mode)3 mmOrange Frosted Acrylicengrave1200 mm/min (20 mm/s)30%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
  • Line interval: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

These values are identical to Falcon2 40W (Normal mode)'s Orange Frosted Acrylic table above: both makers' documents print the same numbers.

Falcon2 40W (Normal mode) · Orange Opaque Glossy Acrylic

Falcon2 40W (Normal mode), Orange Opaque Glossy Acrylic: 2 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 40W (Normal mode)3 mmOrange Opaque Glossy Acryliccut120 mm/min (2 mm/s)30%2
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 40W (Normal mode)3 mmOrange Opaque Glossy Acrylicengrave6000 mm/min (100 mm/s)26%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
  • Line interval: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

Falcon2 40W (Normal mode) · Purple Frosted Acrylic

Falcon2 40W (Normal mode), Purple Frosted Acrylic: 2 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 40W (Normal mode)3 mmPurple Frosted Acryliccut120 mm/min (2 mm/s)30%3
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 40W (Normal mode)3 mmPurple Frosted Acrylicengrave1000 mm/min (16.67 mm/s)30%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
  • Line interval: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

Falcon2 40W (Normal mode) · Purple Opaque Glossy Acrylic

Falcon2 40W (Normal mode), Purple Opaque Glossy Acrylic: 2 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 40W (Normal mode)3 mmPurple Opaque Glossy Acryliccut120 mm/min (2 mm/s)30%2
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 40W (Normal mode)3 mmPurple Opaque Glossy Acrylicengrave6000 mm/min (100 mm/s)26%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
  • Line interval: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

These values are identical to Falcon2 40W (Normal mode)'s Purple Opaque Glossy Acrylic table above: both makers' documents print the same numbers.

Falcon2 40W (Normal mode) · Red Card Paper

Falcon2 40W (Normal mode), Red Card Paper: 2 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 40W (Normal mode)0.2 mmRed Card Papercut4000 mm/min (66.67 mm/s)30%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 40W (Normal mode)0.2 mmRed Card Paperengrave6000 mm/min (100 mm/s)8%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
  • Line interval: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

Falcon2 40W (Normal mode) · Red Felt

Falcon2 40W (Normal mode), Red Felt: 2 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 40W (Normal mode)0.8 mmRed Feltcut4000 mm/min (66.67 mm/s)35%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 40W (Normal mode)0.8 mmRed Feltengrave6000 mm/min (100 mm/s)7%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
  • Line interval: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

Falcon2 40W (Normal mode) · Red Opaque Glossy Acrylic

Falcon2 40W (Normal mode), Red Opaque Glossy Acrylic: 2 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 40W (Normal mode)3 mmRed Opaque Glossy Acryliccut120 mm/min (2 mm/s)30%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 40W (Normal mode)3 mmRed Opaque Glossy Acrylicengrave6000 mm/min (100 mm/s)26%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
  • Line interval: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

Falcon2 40W (Normal mode) · Red Transparent Acrylic

Falcon2 40W (Normal mode), Red Transparent Acrylic: 2 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 40W (Normal mode)3 mmRed Transparent Acryliccut120 mm/min (2 mm/s)30%3
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 40W (Normal mode)3 mmRed Transparent Acrylicengrave3000 mm/min (50 mm/s)12%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
  • Line interval: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

These values are identical to Falcon2 40W (Normal mode)'s Red Transparent Acrylic table above: both makers' documents print the same numbers.

Falcon2 40W (Normal mode) · Rosewood Plywood

Falcon2 40W (Normal mode), Rosewood Plywood: 3 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 40W (Normal mode)3 mmRosewood Plywoodcut750 mm/min (12.5 mm/s)100%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 40W (Normal mode)5 mmRosewood Plywoodcut600 mm/min (10 mm/s)100%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 40W (Normal mode)3 mmRosewood Plywoodengrave6000 mm/min (100 mm/s)20%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
  • Line interval: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

Falcon2 40W (Normal mode) · Walnut Plywood

Falcon2 40W (Normal mode), Walnut Plywood: 3 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 40W (Normal mode)3 mmWalnut Plywoodcut750 mm/min (12.5 mm/s)100%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 40W (Normal mode)5 mmWalnut Plywoodcut600 mm/min (10 mm/s)100%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 40W (Normal mode)3 mmWalnut Plywoodengrave6000 mm/min (100 mm/s)20%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
  • Line interval: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

These values are identical to Falcon2 40W (Normal mode)'s Walnut Plywood table above: both makers' documents print the same numbers.

Falcon2 40W (Normal mode) · White Tile Painted Black

Falcon2 40W (Normal mode), White Tile Painted Black: 1 row, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 40W (Normal mode)6 mmWhite Tile Painted Blackengrave4000 mm/min (66.67 mm/s)28%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
  • Line interval: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

Falcon2 40W (Normal mode) · Yellow Transparent Acrylic

Falcon2 40W (Normal mode), Yellow Transparent Acrylic: 2 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 40W (Normal mode)3 mmYellow Transparent Acryliccut120 mm/min (2 mm/s)30%2
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 40W (Normal mode)3 mmYellow Transparent Acrylicengrave3000 mm/min (50 mm/s)12%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
  • Line interval: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

Not specified by Creality Falcon for any row here: air assist, focus and lens; line interval on engrave rows.

Source: Creality Falcon, read 2026-09-21; reviewed 2026-09-21. Document: CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings.

LU2-10A (10W) · Pine

LU2-10A (10W), Pine: 7 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
LU2-10A (10W)3 mmPinecut300 mm/min (5 mm/s)100%1
  • Air assist: Not specified by Ortur
  • Focus: Not specified by Ortur
  • Lens: Not specified by Ortur
Ortur, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
LU2-10A (10W)5 mmPinecut250 mm/min (4.17 mm/s)100%1
  • Air assist: Not specified by Ortur
  • Focus: Not specified by Ortur
  • Lens: Not specified by Ortur
Ortur, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
LU2-10A (10W)8 mmPinecut100 mm/min (1.67 mm/s)100%1
  • Air assist: Not specified by Ortur
  • Focus: Not specified by Ortur
  • Lens: Not specified by Ortur
Ortur, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
LU2-10A (10W)10 mmPinecut100 mm/min (1.67 mm/s)100%2
  • Air assist: Not specified by Ortur
  • Focus: Not specified by Ortur
  • Lens: Not specified by Ortur
Ortur, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
LU2-10A (10W)12 mmPinecut100 mm/min (1.67 mm/s)100%3
  • Air assist: Not specified by Ortur
  • Focus: Not specified by Ortur
  • Lens: Not specified by Ortur
Ortur, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
LU2-10A (10W)15 mmPinecut100 mm/min (1.67 mm/s)100%5
  • Air assist: Not specified by Ortur
  • Focus: Not specified by Ortur
  • Lens: Not specified by Ortur
Ortur, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
LU2-10A (10W)19 mmPinecut100 mm/min (1.67 mm/s)100%8
  • Air assist: Not specified by Ortur
  • Focus: Not specified by Ortur
  • Lens: Not specified by Ortur
Ortur, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

LU2-10A (10W) · Plywood

LU2-10A (10W), Plywood: 5 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
LU2-10A (10W)1.6 mmPlywoodcut500 mm/min (8.33 mm/s)100%1
  • Air assist: Not specified by Ortur
  • Focus: Not specified by Ortur
  • Lens: Not specified by Ortur
Ortur, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
LU2-10A (10W)2.8 mmPlywoodcut300 mm/min (5 mm/s)100%1
  • Air assist: Not specified by Ortur
  • Focus: Not specified by Ortur
  • Lens: Not specified by Ortur
Ortur, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
LU2-10A (10W)5 mmPlywoodcut300 mm/min (5 mm/s)100%1
  • Air assist: Not specified by Ortur
  • Focus: Not specified by Ortur
  • Lens: Not specified by Ortur
Ortur, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
LU2-10A (10W)8 mmPlywoodcut100 mm/min (1.67 mm/s)100%1
  • Air assist: Not specified by Ortur
  • Focus: Not specified by Ortur
  • Lens: Not specified by Ortur
Ortur, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
LU2-10A (10W)10 mmPlywoodcut100 mm/min (1.67 mm/s)100%8
  • Air assist: Not specified by Ortur
  • Focus: Not specified by Ortur
  • Lens: Not specified by Ortur
Ortur, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

Every row: cut

Not specified by Ortur for any row here: air assist, focus and lens.

Source: Ortur, read 2026-09-21; reviewed 2026-09-21. Document: Ortur LightBurn Material Settings.

LU3-20A/B (20W) · Pine

LU3-20A/B (20W), Pine: 7 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
LU3-20A/B (20W)3 mmPinecut500 mm/min (8.33 mm/s)100%1
  • Air assist: Not specified by Ortur
  • Focus: Not specified by Ortur
  • Lens: Not specified by Ortur
Ortur, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
LU3-20A/B (20W)5 mmPinecut350 mm/min (5.83 mm/s)100%1
  • Air assist: Not specified by Ortur
  • Focus: Not specified by Ortur
  • Lens: Not specified by Ortur
Ortur, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
LU3-20A/B (20W)8 mmPinecut200 mm/min (3.33 mm/s)100%1
  • Air assist: Not specified by Ortur
  • Focus: Not specified by Ortur
  • Lens: Not specified by Ortur
Ortur, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
LU3-20A/B (20W)10 mmPinecut150 mm/min (2.5 mm/s)100%1
  • Air assist: Not specified by Ortur
  • Focus: Not specified by Ortur
  • Lens: Not specified by Ortur
Ortur, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
LU3-20A/B (20W)12 mmPinecut100 mm/min (1.67 mm/s)100%1
  • Air assist: Not specified by Ortur
  • Focus: Not specified by Ortur
  • Lens: Not specified by Ortur
Ortur, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
LU3-20A/B (20W)15 mmPinecut100 mm/min (1.67 mm/s)100%2
  • Air assist: Not specified by Ortur
  • Focus: Not specified by Ortur
  • Lens: Not specified by Ortur
Ortur, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
LU3-20A/B (20W)19 mmPinecut100 mm/min (1.67 mm/s)100%3
  • Air assist: Not specified by Ortur
  • Focus: Not specified by Ortur
  • Lens: Not specified by Ortur
Ortur, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

LU3-20A/B (20W) · Plywood

LU3-20A/B (20W), Plywood: 6 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
LU3-20A/B (20W)1.6 mmPlywoodcut600 mm/min (10 mm/s)100%1
  • Air assist: Not specified by Ortur
  • Focus: Not specified by Ortur
  • Lens: Not specified by Ortur
Ortur, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
LU3-20A/B (20W)2.8 mmPlywoodcut500 mm/min (8.33 mm/s)100%1
  • Air assist: Not specified by Ortur
  • Focus: Not specified by Ortur
  • Lens: Not specified by Ortur
Ortur, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
LU3-20A/B (20W)5 mmPlywoodcut350 mm/min (5.83 mm/s)100%1
  • Air assist: Not specified by Ortur
  • Focus: Not specified by Ortur
  • Lens: Not specified by Ortur
Ortur, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
LU3-20A/B (20W)8 mmPlywoodcut200 mm/min (3.33 mm/s)100%1
  • Air assist: Not specified by Ortur
  • Focus: Not specified by Ortur
  • Lens: Not specified by Ortur
Ortur, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
LU3-20A/B (20W)10 mmPlywoodcut250 mm/min (4.17 mm/s)100%2
  • Air assist: Not specified by Ortur
  • Focus: Not specified by Ortur
  • Lens: Not specified by Ortur
Ortur, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
LU3-20A/B (20W)15 mmPlywoodcut200 mm/min (3.33 mm/s)100%2
  • Air assist: Not specified by Ortur
  • Focus: Not specified by Ortur
  • Lens: Not specified by Ortur
Ortur, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

Every row: cut

Not specified by Ortur for any row here: air assist, focus and lens.

Source: Ortur, read 2026-09-21; reviewed 2026-09-21. Document: Ortur LightBurn Material Settings.

LU3-40A (40W) · Pine

LU3-40A (40W), Pine: 7 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
LU3-40A (40W)3 mmPinecut700 mm/min (11.67 mm/s)100%1
  • Air assist: Not specified by Ortur
  • Focus: Not specified by Ortur
  • Lens: Not specified by Ortur
Ortur, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
LU3-40A (40W)5 mmPinecut500 mm/min (8.33 mm/s)100%1
  • Air assist: Not specified by Ortur
  • Focus: Not specified by Ortur
  • Lens: Not specified by Ortur
Ortur, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
LU3-40A (40W)8 mmPinecut300 mm/min (5 mm/s)100%1
  • Air assist: Not specified by Ortur
  • Focus: Not specified by Ortur
  • Lens: Not specified by Ortur
Ortur, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
LU3-40A (40W)10 mmPinecut250 mm/min (4.17 mm/s)100%1
  • Air assist: Not specified by Ortur
  • Focus: Not specified by Ortur
  • Lens: Not specified by Ortur
Ortur, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
LU3-40A (40W)12 mmPinecut180 mm/min (3 mm/s)100%1
  • Air assist: Not specified by Ortur
  • Focus: Not specified by Ortur
  • Lens: Not specified by Ortur
Ortur, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
LU3-40A (40W)15 mmPinecut150 mm/min (2.5 mm/s)100%1
  • Air assist: Not specified by Ortur
  • Focus: Not specified by Ortur
  • Lens: Not specified by Ortur
Ortur, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
LU3-40A (40W)19 mmPinecut120 mm/min (2 mm/s)100%1
  • Air assist: Not specified by Ortur
  • Focus: Not specified by Ortur
  • Lens: Not specified by Ortur
Ortur, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

LU3-40A (40W) · Plywood

LU3-40A (40W), Plywood: 6 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
LU3-40A (40W)1.6 mmPlywoodcut1600 mm/min (26.67 mm/s)100%1
  • Air assist: Not specified by Ortur
  • Focus: Not specified by Ortur
  • Lens: Not specified by Ortur
Ortur, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
LU3-40A (40W)2.8 mmPlywoodcut1100 mm/min (18.33 mm/s)100%1
  • Air assist: Not specified by Ortur
  • Focus: Not specified by Ortur
  • Lens: Not specified by Ortur
Ortur, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
LU3-40A (40W)5 mmPlywoodcut700 mm/min (11.67 mm/s)100%1
  • Air assist: Not specified by Ortur
  • Focus: Not specified by Ortur
  • Lens: Not specified by Ortur
Ortur, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
LU3-40A (40W)8 mmPlywoodcut400 mm/min (6.67 mm/s)100%1
  • Air assist: Not specified by Ortur
  • Focus: Not specified by Ortur
  • Lens: Not specified by Ortur
Ortur, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
LU3-40A (40W)10 mmPlywoodcut250 mm/min (4.17 mm/s)100%1
  • Air assist: Not specified by Ortur
  • Focus: Not specified by Ortur
  • Lens: Not specified by Ortur
Ortur, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
LU3-40A (40W)15 mmPlywoodcut200 mm/min (3.33 mm/s)100%1
  • Air assist: Not specified by Ortur
  • Focus: Not specified by Ortur
  • Lens: Not specified by Ortur
Ortur, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

Every row: cut · 1 pass

Not specified by Ortur for any row here: air assist, focus and lens.

Source: Ortur, read 2026-09-21; reviewed 2026-09-21. Document: Ortur LightBurn Material Settings.

xTool S1 20W blue module · Lindenholz (basswood, as printed)

xTool S1 20W blue module, Lindenholz: 3 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
xTool S1 20W blue module3 mmLindenholzcut7 mm/s = 420 mm/min100%1
  • Air assist: Not specified by xTool
  • Focus: Not specified by xTool
  • Lens: Not specified by xTool
xTool, read 2026-10-02. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
xTool S1 20W blue module6 mmLindenholzcut4 mm/s = 240 mm/min100%1
  • Air assist: Not specified by xTool
  • Focus: Not specified by xTool
  • Lens: Not specified by xTool
xTool, read 2026-10-02. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
xTool S1 20W blue module10 mmLindenholzcut3 mm/s = 180 mm/min100%1
  • Air assist: Not specified by xTool
  • Focus: Not specified by xTool
  • Lens: Not specified by xTool
xTool, read 2026-10-02. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

xTool S1 20W blue module · Schwarzes Acryl

xTool S1 20W blue module, Schwarzes Acryl: 1 row, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
xTool S1 20W blue module3 mmSchwarzes Acrylcut4 mm/s = 240 mm/min100%1
  • Air assist: Not specified by xTool
  • Focus: Not specified by xTool
  • Lens: Not specified by xTool
xTool, read 2026-10-02. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

These values are identical to the D1 Pro 20W table above: both makers' documents print the same numbers.

Every row: cut · 1 pass

Not specified by xTool for any row here: air assist, focus and lens.

Source: xTool, read 2026-10-02; reviewed 2026-09-21. Document: Materialeinstellungen für xTool Maschinen.

xTool S1 40W blue module · Lindenholz (basswood, as printed)

xTool S1 40W blue module, Lindenholz: 4 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
xTool S1 40W blue module3 mmLindenholzcut15 mm/s = 900 mm/min100%1
  • Air assist: Not specified by xTool
  • Focus: Not specified by xTool
  • Lens: Not specified by xTool
xTool, read 2026-10-02. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
xTool S1 40W blue module6 mmLindenholzcut10 mm/s = 600 mm/min100%1
  • Air assist: Not specified by xTool
  • Focus: Not specified by xTool
  • Lens: Not specified by xTool
xTool, read 2026-10-02. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
xTool S1 40W blue module10 mmLindenholzcut6 mm/s = 360 mm/min100%1
  • Air assist: Not specified by xTool
  • Focus: Not specified by xTool
  • Lens: Not specified by xTool
xTool, read 2026-10-02. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
xTool S1 40W blue module15 mmLindenholzcut2 mm/s = 120 mm/min100%1
  • Air assist: Not specified by xTool
  • Focus: Not specified by xTool
  • Lens: Not specified by xTool
xTool, read 2026-10-02. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

xTool S1 40W blue module · Schwarzes Acryl

xTool S1 40W blue module, Schwarzes Acryl: 2 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
xTool S1 40W blue module3 mmSchwarzes Acrylcut8 mm/s = 480 mm/min100%1
  • Air assist: Not specified by xTool
  • Focus: Not specified by xTool
  • Lens: Not specified by xTool
xTool, read 2026-10-02. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
xTool S1 40W blue module6 mmSchwarzes Acrylcut2 mm/s = 120 mm/min100%1
  • Air assist: Not specified by xTool
  • Focus: Not specified by xTool
  • Lens: Not specified by xTool
xTool, read 2026-10-02. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

Every row: cut · 1 pass

Not specified by xTool for any row here: air assist, focus and lens.

Source: xTool, read 2026-10-02; reviewed 2026-09-21. Document: Materialeinstellungen für xTool Maschinen.

Material safety statements from the sources

Quoted from laser makers' documents about each material. Not a complete safety procedure.

Acrylic

Fire risk · 3 statements from Creality and Epilog Laser
  • Fire: Epilog Laser, under “Introduction”: Many materials are susceptible to igniting; however, acrylic (in all its forms), has shown to be especially flammable when vector cutting with the laser. (Reducing Fire Hazards with your Laser, read 2026-09-21)
  • Fire: Epilog Laser, under “Warnings and Recommendations”: Utilizing the Air Assist feature will reduce the instance of flare-ups when working with flammable materials such as acrylic and wood. (Reducing Fire Hazards with your Laser, read 2026-09-21)
  • Fire: Creality, under “Security Statement”: It is forbidden to leave it unattended while the machine is working. (Creality Falcon2 (12W/22W/40W) User Manual, read 2026-09-21)

Reviewed 2026-09-21; next review due 2026-12-20.

Anodized aluminum

Ventilate and fire risk · 3 statements from Creality

Reviewed 2026-09-21; next review due 2026-12-20.

Felt

Fire risk, ventilate and check what the material is made of · 5 statements from Creality and Epilog Laser
  • Fire: Creality, under “Security Statement”: But most materials are inherently flammable and can be ignited, which may burn the machine and the surroundings. (Creality Falcon2 (12W/22W/40W) User Manual, read 2026-09-21)
  • Fire: Creality, under “Security Statement”: It is forbidden to leave it unattended while the machine is working. (Creality Falcon2 (12W/22W/40W) User Manual, read 2026-09-21)
  • Fire: Creality, under “Security Statement”: Prepare fire extinguishers as a backup. Regularly maintain and inspect the fire extinguishers. (Creality Falcon2 (12W/22W/40W) User Manual, read 2026-09-21)
  • Ventilation: Creality, under “Security Statement”: Smoke or smells may be produced during laser engraving and cutting. It is recommended to operate in a well-ventilated environment. (Creality Falcon2 (12W/22W/40W) User Manual, read 2026-09-21)
  • Check the composition: Epilog Laser, under “What happens if you engrave or cut something containing hydrogen or vinyl chloride?”: To protect your health and the life of your machine, always obtain a MSDS for materials about which you are uncertain. (Material Safety and your Laser, read 2026-09-21)

The cited safety pages do not name felt or its fibre; the Creality Falcon parameter rows print Red Felt without a composition.

Reviewed 2026-09-21; next review due 2026-12-20.

Leather

Trotec Laser, under “Materials you should not process with a laser”: Leather and artificial leather that contains chromium (VI)

Caution: Hazard, check what the material is made of, ventilate and fire risk · 6 statements from Creality, Epilog Laser and Trotec Laser
  • Hazard: Trotec Laser, under “Materials you should not process with a laser”: There are some materials that should not be processed with a laser engraver or a laser cutter because of their chemical make-up. Processing these materials creates dangerous gases or dust. (Which materials are not suitable for laser cutting and engraving?, read 2026-09-21)
  • Fire: Creality, under “Security Statement”: It is forbidden to leave it unattended while the machine is working. (Creality Falcon2 (12W/22W/40W) User Manual, read 2026-09-21)
  • Ventilation: Creality, under “Security Statement”: Smoke or smells may be produced during laser engraving and cutting. It is recommended to operate in a well-ventilated environment. (Creality Falcon2 (12W/22W/40W) User Manual, read 2026-09-21)
  • Check the composition: Trotec Laser, under “Materials you should not process with a laser”: Leather and artificial leather that contains chromium (VI) (Which materials are not suitable for laser cutting and engraving?, read 2026-09-21)
  • Check the composition: Creality, under “Parameters”: Cardboard, wood, bamboo, rubber, leather, fabric, acrylic, plastic, etc. (Creality Falcon2 (12W/22W/40W) User Manual, read 2026-09-21)
  • Check the composition: Epilog Laser, under “What happens if you engrave or cut something containing hydrogen or vinyl chloride?”: To protect your health and the life of your machine, always obtain a MSDS for materials about which you are uncertain. (Material Safety and your Laser, read 2026-09-21)

Tanning method not stated by Creality Falcon.

Reviewed 2026-09-21; next review due 2026-12-20.

Painted tile

Ventilate, fire risk and check what the material is made of · 3 statements from Creality and Epilog Laser
  • Fire: Creality, under “Security Statement”: It is forbidden to leave it unattended while the machine is working. (Creality Falcon2 (12W/22W/40W) User Manual, read 2026-09-21)
  • Ventilation: Creality, under “Security Statement”: Smoke or smells may be produced during laser engraving and cutting. It is recommended to operate in a well-ventilated environment. (Creality Falcon2 (12W/22W/40W) User Manual, read 2026-09-21)
  • Check the composition: Epilog Laser, under “What happens if you engrave or cut something containing hydrogen or vinyl chloride?”: To protect your health and the life of your machine, always obtain a MSDS for materials about which you are uncertain. (Material Safety and your Laser, read 2026-09-21)

The cited safety pages do not name tile or paint; the Creality Falcon parameter rows print White Tile Painted Black without a paint composition.

Reviewed 2026-09-21; next review due 2026-12-20.

Paper

Fire risk and ventilate · 4 statements from Creality
  • Fire: Creality, under “Security Statement”: But most materials are inherently flammable and can be ignited, which may burn the machine and the surroundings. (Creality Falcon2 (12W/22W/40W) User Manual, read 2026-09-21)
  • Fire: Creality, under “Security Statement”: It is forbidden to leave it unattended while the machine is working. (Creality Falcon2 (12W/22W/40W) User Manual, read 2026-09-21)
  • Fire: Creality, under “Security Statement”: Prepare fire extinguishers as a backup. Regularly maintain and inspect the fire extinguishers. (Creality Falcon2 (12W/22W/40W) User Manual, read 2026-09-21)
  • Ventilation: Creality, under “Security Statement”: Smoke or smells may be produced during laser engraving and cutting. It is recommended to operate in a well-ventilated environment. (Creality Falcon2 (12W/22W/40W) User Manual, read 2026-09-21)

Reviewed 2026-09-21; next review due 2026-12-20.

Plywood

Fire risk, ventilate and check what the material is made of · 5 statements from Creality and Epilog Laser
  • Fire: Creality, under “Security Statement”: But most materials are inherently flammable and can be ignited, which may burn the machine and the surroundings. (Creality Falcon2 (12W/22W/40W) User Manual, read 2026-09-21)
  • Fire: Creality, under “Security Statement”: It is forbidden to leave it unattended while the machine is working. (Creality Falcon2 (12W/22W/40W) User Manual, read 2026-09-21)
  • Fire: Epilog Laser, under “Warnings and Recommendations”: Never operate the laser system unattended. (Reducing Fire Hazards with your Laser, read 2026-09-21)
  • Ventilation: Creality, under “Security Statement”: Smoke or smells may be produced during laser engraving and cutting. It is recommended to operate in a well-ventilated environment. (Creality Falcon2 (12W/22W/40W) User Manual, read 2026-09-21)
  • Check the composition: Epilog Laser, under “What happens if you engrave or cut something containing hydrogen or vinyl chloride?”: To protect your health and the life of your machine, always obtain a MSDS for materials about which you are uncertain. (Material Safety and your Laser, read 2026-09-21)

The cited safety pages name wood but not plywood or its adhesive; the Creality Falcon parameter rows print Walnut Plywood and Rosewood Plywood without a glue type.

Reviewed 2026-09-21; next review due 2026-12-20.

Stainless steel

Ventilate and fire risk · 3 statements from Creality

Reviewed 2026-09-21; next review due 2026-12-20.

Wood

Fire risk and ventilate · 5 statements from Creality and Epilog Laser
  • Fire: Epilog Laser, under “Warnings and Recommendations”: Utilizing the Air Assist feature will reduce the instance of flare-ups when working with flammable materials such as acrylic and wood. (Reducing Fire Hazards with your Laser, read 2026-09-21)
  • Fire: Epilog Laser, under “Warnings and Recommendations”: Since most users cut wood and acrylic, these small pieces that fall into the table tray act just like kindling and can ignite and start a fire. (Reducing Fire Hazards with your Laser, read 2026-09-21)
  • Fire: Creality, under “Security Statement”: But most materials are inherently flammable and can be ignited, which may burn the machine and the surroundings. (Creality Falcon2 (12W/22W/40W) User Manual, read 2026-09-21)
  • Fire: Creality, under “Security Statement”: It is forbidden to leave it unattended while the machine is working. (Creality Falcon2 (12W/22W/40W) User Manual, read 2026-09-21)
  • Ventilation: Creality, under “Security Statement”: Smoke or smells may be produced during laser engraving and cutting. It is recommended to operate in a well-ventilated environment. (Creality Falcon2 (12W/22W/40W) User Manual, read 2026-09-21)

Reviewed 2026-09-21; next review due 2026-12-20.

Common questions

Can I use a row on another machine?

Each row belongs to the stated machine and configuration. A matching wattage or material name does not establish a setting for another machine.

Why are some fields marked not specified?

The publisher’s table prints speed, power and thickness, and sometimes passes, but not air assist, focus or lens. CutChart shows each unprinted field as not specified rather than filling it in.

Why are some combinations absent?

CutChart publishes a row only when its source, exact machine, material, operation and a sourced material-safety statement meet the reference requirements. An absent row is an unknown answer.

Source documents

Sources (7)
Creality Falcon: CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings (151 excerpts)

CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings

Publication date: 2023-12-23 · Read · Captured

  1. Anodized Aluminum | 3 | 100 | 250 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  2. Bamboo | 3 | 100 | 280 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  3. Bamboo | 3 | 40 | 4000 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  4. 10 | 100 | 180 | 3

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  5. Cutting | Basswood | 2 | 100 | 400 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  6. Engraving | Basswood | 2 | 40 | 4000 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  7. 3 | 100 | 300 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  8. 5 | 100 | 200 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  9. 8 | 100 | 250 | 2

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  10. Black Acrylic | 4.6 | 100 | 300 | 2

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  11. 7.6 | 100 | 250 | 3

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  12. Black Frosted Acrylic | 3 | 95 | 200 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  13. Black Frosted Acrylic | 3 | 80 | 3000 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  14. Black Opaque Glossy Acrylic | 3 | 80 | 4000 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  15. Brown Leather | 0.65 | 100 | 2000 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  16. Brown Leather | 0.65 | 20 | 4000 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  17. Brushed Stainless Steel | 2 | 100 | 800 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  18. Green Frosted Acrylic | 3 | 95 | 120 | 3

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  19. Green Frosted Acrylic | 3 | 90 | 1200 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  20. Green Opaque Glossy Acrylic | 3 | 95 | 120 | 3

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  21. Green Opaque Glossy Acrylic | 3 | 50 | 4000 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  22. Green Transparent Acrylic | 3 | 95 | 120 | 3

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  23. Green Transparent Acrylic | 3 | 40 | 3000 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  24. Kraft Paper | 0.15 | 15 | 4000 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  25. Kraft Paper | 0.2 | 100 | 4000 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  26. Orange Frosted Acrylic | 3 | 95 | 120 | 3

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  27. Orange Frosted Acrylic | 3 | 90 | 1200 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  28. Orange Opaque Glossy Acrylic | 3 | 95 | 120 | 2

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  29. Orange Opaque Glossy Acrylic | 3 | 50 | 4000 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  30. Purple Frosted Acrylic | 3 | 95 | 120 | 3

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  31. Purple Frosted Acrylic | 3 | 90 | 1000 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  32. Purple Opaque Glossy Acrylic | 3 | 95 | 120 | 2

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  33. Purple Opaque Glossy Acrylic | 3 | 50 | 4000 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  34. Red Card Paper | 0.2 | 100 | 4000 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  35. Red Card Paper | 0.2 | 15 | 4000 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  36. Red Felt | 0.8 | 100 | 3800 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  37. Red Felt | 0.8 | 15 | 4000 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  38. Red Opaque Glossy Acrylic | 3 | 95 | 120 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  39. Red Opaque Glossy Acrylic | 3 | 50 | 4000 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  40. Red Transparent Acrylic | 3 | 95 | 120 | 3

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  41. Red Transparent Acrylic | 3 | 40 | 3000 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  42. Rosewood Plywood | 3 | 100 | 280 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  43. Rosewood Plywood | 3 | 35 | 4000 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  44. 5 | 100 | 150 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  45. Walnut Plywood | 3 | 100 | 280 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  46. Walnut Plywood | 3 | 35 | 4000 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  47. 5 | 100 | 150 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  48. White Tile Painted Black | 6 | 85 | 4000 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  49. Yellow Transparent Acrylic | 3 | 95 | 120 | 2

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  50. Yellow Transparent Acrylic | 3 | 40 | 3000 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  51. Anodized Aluminum | 3 | 60 | 6000 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  52. Bamboo | 3 | 100 | 450 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  53. Bamboo | 3 | 40 | 6000 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  54. 10 | 100 | 120 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  55. Cutting | Basswood | 2 | 100 | 700 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  56. Engraving | Basswood | 2 | 40 | 6000 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  57. 3 | 100 | 550 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  58. 5 | 100 | 400 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  59. 8 | 100 | 240 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  60. Black Acrylic | 4.6 | 100 | 120 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  61. 7.6 | 100 | 120 | 2

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  62. Black Frosted Acrylic | 3 | 55 | 180 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  63. Black Frosted Acrylic | 3 | 40 | 3000 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  64. Black Opaque Glossy Acrylic | 3 | 50 | 4000 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  65. Brown Leather | 0.65 | 100 | 2000 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  66. Brown Leather | 0.65 | 18 | 6000 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  67. Brushed Stainless Steel | 2 | 80 | 6000 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  68. Green Frosted Acrylic | 3 | 55 | 120 | 3

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  69. Green Frosted Acrylic | 3 | 60 | 1200 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  70. Green Opaque Glossy Acrylic | 3 | 55 | 120 | 3

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  71. Green Opaque Glossy Acrylic | 3 | 50 | 6000 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  72. Green Transparent Acrylic | 3 | 55 | 120 | 3

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  73. Green Transparent Acrylic | 3 | 20 | 3000 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  74. Kraft Paper | 0.15 | 18 | 6000 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  75. Kraft Paper | 0.2 | 80 | 4000 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  76. Orange Frosted Acrylic | 3 | 55 | 120 | 3

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  77. Orange Frosted Acrylic | 3 | 60 | 1200 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  78. Orange Opaque Glossy Acrylic | 3 | 55 | 120 | 2

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  79. Orange Opaque Glossy Acrylic | 3 | 50 | 6000 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  80. Purple Frosted Acrylic | 3 | 55 | 120 | 3

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  81. Purple Frosted Acrylic | 3 | 60 | 1000 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  82. Purple Opaque Glossy Acrylic | 3 | 55 | 120 | 2

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  83. Purple Opaque Glossy Acrylic | 3 | 50 | 6000 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  84. Red Card Paper | 0.2 | 50 | 4000 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  85. Red Card Paper | 0.2 | 15 | 6000 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  86. Red Felt | 0.8 | 55 | 4000 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  87. Red Felt | 0.8 | 13 | 6000 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  88. Red Opaque Glossy Acrylic | 3 | 55 | 120 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  89. Red Opaque Glossy Acrylic | 3 | 50 | 6000 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  90. Red Transparent Acrylic | 3 | 55 | 120 | 3

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  91. Red Transparent Acrylic | 3 | 20 | 3000 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  92. Rosewood Plywood | 3 | 100 | 450 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  93. Rosewood Plywood | 3 | 35 | 6000 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  94. 5 | 100 | 350 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  95. Walnut Plywood | 3 | 100 | 450 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  96. Walnut Plywood | 3 | 35 | 6000 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  97. 5 | 100 | 350 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  98. White Tile Painted Black | 6 | 50 | 4000 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  99. Yellow Transparent Acrylic | 3 | 55 | 120 | 2

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  100. Yellow Transparent Acrylic | 3 | 20 | 3000 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  101. Anodized Aluminum | 3 | 30 | 6000 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  102. Bamboo | 3 | 25 | 6000 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  103. Bamboo | 5 | 100 | 800 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  104. 10 | 100 | 300 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  105. 15 | 100 | 150 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  106. Cutting | Basswood | 2 | 100 | 1000 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  107. Engraving | Basswood | 2 | 25 | 6000 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  108. 3 | 100 | 850 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  109. 5 | 100 | 700 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  110. 8 | 100 | 400 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  111. Black Acrylic | 4.6 | 100 | 180 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  112. 7.6 | 100 | 120 | 2

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  113. Black Frosted Acrylic | 3 | 30 | 180 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  114. Black Frosted Acrylic | 3 | 22 | 3000 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  115. Black Opaque Glossy Acrylic | 3 | 26 | 4000 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  116. Brown Leather | 0.65 | 70 | 4000 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  117. Brown Leather | 0.65 | 12 | 6000 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  118. Brushed Stainless Steel | 2 | 40 | 6000 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  119. Green Frosted Acrylic | 3 | 30 | 120 | 3

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  120. Green Frosted Acrylic | 3 | 30 | 1200 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  121. Green Opaque Glossy Acrylic | 3 | 30 | 120 | 3

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  122. Green Opaque Glossy Acrylic | 3 | 26 | 6000 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  123. Green Transparent Acrylic | 3 | 30 | 120 | 3

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  124. Green Transparent Acrylic | 3 | 12 | 3000 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  125. Kraft Paper | 0.15 | 12 | 6000 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  126. Kraft Paper | 0.2 | 40 | 4000 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  127. Orange Frosted Acrylic | 3 | 30 | 120 | 3

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  128. Orange Frosted Acrylic | 3 | 30 | 1200 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  129. Orange Opaque Glossy Acrylic | 3 | 30 | 120 | 2

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  130. Orange Opaque Glossy Acrylic | 3 | 26 | 6000 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  131. Purple Frosted Acrylic | 3 | 30 | 120 | 3

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  132. Purple Frosted Acrylic | 3 | 30 | 1000 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  133. Purple Opaque Glossy Acrylic | 3 | 30 | 120 | 2

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  134. Purple Opaque Glossy Acrylic | 3 | 26 | 6000 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  135. Red Card Paper | 0.2 | 30 | 4000 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  136. Red Card Paper | 0.2 | 8 | 6000 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  137. Red Felt | 0.8 | 35 | 4000 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  138. Red Felt | 0.8 | 7 | 6000 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  139. Red Opaque Glossy Acrylic | 3 | 30 | 120 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  140. Red Opaque Glossy Acrylic | 3 | 26 | 6000 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  141. Red Transparent Acrylic | 3 | 30 | 120 | 3

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  142. Red Transparent Acrylic | 3 | 12 | 3000 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  143. Rosewood Plywood | 3 | 100 | 750 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  144. Rosewood Plywood | 3 | 20 | 6000 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  145. 5 | 100 | 600 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  146. Walnut Plywood | 3 | 100 | 750 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  147. Walnut Plywood | 3 | 20 | 6000 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  148. 5 | 100 | 600 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  149. White Tile Painted Black | 6 | 28 | 4000 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  150. Yellow Transparent Acrylic | 3 | 30 | 120 | 2

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  151. Yellow Transparent Acrylic | 3 | 12 | 3000 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

Epilog Laser: Reducing Fire Hazards with your Laser (4 excerpts)

Reducing Fire Hazards with your Laser

Publication date not printed by Epilog Laser · Read · Captured

  1. Many materials are susceptible to igniting; however, acrylic (in all its forms), has shown to be especially flammable when vector cutting with the laser.

    Epilog Laser, Reducing Fire Hazards with your Laser, Introduction. Publication date not printed by Epilog Laser · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  2. Utilizing the Air Assist feature will reduce the instance of flare-ups when working with flammable materials such as acrylic and wood.

    Epilog Laser, Reducing Fire Hazards with your Laser, Warnings and Recommendations. Publication date not printed by Epilog Laser · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  3. Since most users cut wood and acrylic, these small pieces that fall into the table tray act just like kindling and can ignite and start a fire.

    Epilog Laser, Reducing Fire Hazards with your Laser, Warnings and Recommendations. Publication date not printed by Epilog Laser · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  4. Never operate the laser system unattended.

    Epilog Laser, Reducing Fire Hazards with your Laser, Warnings and Recommendations. Publication date not printed by Epilog Laser · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

Epilog Laser: Material Safety and your Laser (1 excerpt)

Material Safety and your Laser

Publication date not printed by Epilog Laser · Read · Captured

  1. To protect your health and the life of your machine, always obtain a MSDS for materials about which you are uncertain.

    Epilog Laser, Material Safety and your Laser, What happens if you engrave or cut something containing hydrogen or vinyl chloride?. Publication date not printed by Epilog Laser · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

Creality: Creality Falcon2 (12W/22W/40W) User Manual (5 excerpts)

Creality Falcon2 (12W/22W/40W) User Manual

Publication date not printed by Creality · Read · Captured

  1. 13. Prepare fire extinguishers as a backup. Regularly maintain and inspect the fire extinguishers.

    Creality, Creality Falcon2 (12W/22W/40W) User Manual, Security Statement. Publication date not printed by Creality · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  2. When a laser engraver engraves or cuts materials, it casts a high-density laser beam that heats the surface to vaporize materials without burning them. But most materials are inherently flammable and can be ignited, which may burn the machine and the surroundings.

    Creality, Creality Falcon2 (12W/22W/40W) User Manual, Security Statement. Publication date not printed by Creality · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  3. Cardboard, wood, bamboo, rubber, leather, fabric, acrylic, plastic, etc.

    Creality, Creality Falcon2 (12W/22W/40W) User Manual, Parameters. Publication date not printed by Creality · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  4. 14. It is forbidden to leave it unattended while the machine is working.

    Creality, Creality Falcon2 (12W/22W/40W) User Manual, Security Statement. Publication date not printed by Creality · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  5. 11. Smoke or smells may be produced during laser engraving and cutting. It is recommended to operate in a well-ventilated environment.

    Creality, Creality Falcon2 (12W/22W/40W) User Manual, Security Statement. Publication date not printed by Creality · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

Ortur: Ortur LightBurn Material Settings (38 excerpts)

Ortur LightBurn Material Settings

Publication date not printed by Ortur · Read · Captured

  1. Image Mode: Line Speed(mm/m): 100mm Power Min(%): 100 Perform Multiple Passes: 2

    Ortur, Ortur LightBurn Material Settings, LightBurn Settings for Cutting. Publication date not printed by Ortur · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  2. Image Mode: Line Speed(mm/m): 100mm Power Min(%): 100 Perform Multiple Passes: 3

    Ortur, Ortur LightBurn Material Settings, LightBurn Settings for Cutting. Publication date not printed by Ortur · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  3. Image Mode: Line Speed(mm/m): 100mm Power Min(%): 100 Perform Multiple Passes: 5

    Ortur, Ortur LightBurn Material Settings, LightBurn Settings for Cutting. Publication date not printed by Ortur · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  4. Image Mode: Line Speed(mm/m): 100mm Power Min(%): 100 Perform Multiple Passes: 8

    Ortur, Ortur LightBurn Material Settings, LightBurn Settings for Cutting. Publication date not printed by Ortur · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  5. Image Mode: Line Speed(mm/m): 300mm Power Min(%): 100 Perform Multiple Passes: 1

    Ortur, Ortur LightBurn Material Settings, LightBurn Settings for Cutting. Publication date not printed by Ortur · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  6. Image Mode: Line Speed(mm/m): 250mm Power Min(%): 100 Perform Multiple Passes: 1

    Ortur, Ortur LightBurn Material Settings, LightBurn Settings for Cutting. Publication date not printed by Ortur · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  7. Image Mode: Line Speed(mm/m): 100mm Power Min(%): 100 Perform Multiple Passes: 1

    Ortur, Ortur LightBurn Material Settings, LightBurn Settings for Cutting. Publication date not printed by Ortur · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  8. Image Mode: Line Speed(mm/m): 100mm Power Min(%): 100 Perform Multiple Passes: 8

    Ortur, Ortur LightBurn Material Settings, LightBurn Settings for Cutting. Publication date not printed by Ortur · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  9. Image Mode: Line Speed(mm/m): 500mm Power Min(%): 100 Perform Multiple Passes: 1

    Ortur, Ortur LightBurn Material Settings, LightBurn Settings for Cutting. Publication date not printed by Ortur · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  10. Image Mode: Line Speed(mm/m): 300mm Power Min(%): 100 Perform Multiple Passes: 1

    Ortur, Ortur LightBurn Material Settings, LightBurn Settings for Cutting. Publication date not printed by Ortur · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  11. Image Mode: Line Speed(mm/m): 300mm Power Min(%): 100 Perform Multiple Passes: 1

    Ortur, Ortur LightBurn Material Settings, LightBurn Settings for Cutting. Publication date not printed by Ortur · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  12. Image Mode: Line Speed(mm/m): 100mm Power Min(%): 100 Perform Multiple Passes: 1

    Ortur, Ortur LightBurn Material Settings, LightBurn Settings for Cutting. Publication date not printed by Ortur · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  13. Image Mode: Line Speed(mm/m): 150mm Power Min(%): 100 Perform Multiple Passes: 1

    Ortur, Ortur LightBurn Material Settings, LightBurn Settings for Cutting. Publication date not printed by Ortur · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  14. Image Mode: Line Speed(mm/m): 100mm Power Min(%): 100 Perform Multiple Passes: 1

    Ortur, Ortur LightBurn Material Settings, LightBurn Settings for Cutting. Publication date not printed by Ortur · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  15. Image Mode: Line Speed(mm/m): 100mm Power Min(%): 100 Perform Multiple Passes: 2

    Ortur, Ortur LightBurn Material Settings, LightBurn Settings for Cutting. Publication date not printed by Ortur · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  16. Image Mode: Line Speed(mm/m): 100mm Power Min(%): 100 Perform Multiple Passes: 3

    Ortur, Ortur LightBurn Material Settings, LightBurn Settings for Cutting. Publication date not printed by Ortur · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  17. Image Mode: Line Speed(mm/m): 500mm Power Min(%): 100 Perform Multiple Passes: 1

    Ortur, Ortur LightBurn Material Settings, LightBurn Settings for Cutting. Publication date not printed by Ortur · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  18. Image Mode: Line Speed(mm/m): 350mm Power Min(%): 100 Perform Multiple Passes: 1

    Ortur, Ortur LightBurn Material Settings, LightBurn Settings for Cutting. Publication date not printed by Ortur · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  19. Image Mode: Line Speed(mm/m): 200mm Power Min(%): 100 Perform Multiple Passes: 1

    Ortur, Ortur LightBurn Material Settings, LightBurn Settings for Cutting. Publication date not printed by Ortur · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  20. Image Mode: Line Speed(mm/m): 250mm Power Min(%): 100 Perform Multiple Passes: 2

    Ortur, Ortur LightBurn Material Settings, LightBurn Settings for Cutting. Publication date not printed by Ortur · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  21. Image Mode: Line Speed(mm/m): 200mm Power Min(%): 100 Perform Multiple Passes: 2

    Ortur, Ortur LightBurn Material Settings, LightBurn Settings for Cutting. Publication date not printed by Ortur · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  22. Image Mode: Line Speed(mm/m): 600mm Power Min(%): 100 Perform Multiple Passes: 1

    Ortur, Ortur LightBurn Material Settings, LightBurn Settings for Cutting. Publication date not printed by Ortur · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  23. Image Mode: Line Speed(mm/m): 500mm Power Min(%): 100 Perform Multiple Passes: 1

    Ortur, Ortur LightBurn Material Settings, LightBurn Settings for Cutting. Publication date not printed by Ortur · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  24. Image Mode: Line Speed(mm/m): 350mm Power Min(%): 100 Perform Multiple Passes: 1

    Ortur, Ortur LightBurn Material Settings, LightBurn Settings for Cutting. Publication date not printed by Ortur · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  25. Image Mode: Line Speed(mm/m): 200mm P ower Min(%): 100 Perform Multiple Passes: 1

    Ortur, Ortur LightBurn Material Settings, LightBurn Settings for Cutting. Publication date not printed by Ortur · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  26. Image Mode: Line Speed(mm/m): 250mm Power Min(%): 100 Perform Multiple Passes: 1

    Ortur, Ortur LightBurn Material Settings, LightBurn Settings for Cutting. Publication date not printed by Ortur · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  27. Image Mode: Line Speed(mm/m): 180mm Power Min(%): 100 Perform Multiple Passes: 1

    Ortur, Ortur LightBurn Material Settings, LightBurn Settings for Cutting. Publication date not printed by Ortur · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  28. Image Mode: Line Speed(mm/m): 150mm Power Min(%): 100 Perform Multiple Passes: 1

    Ortur, Ortur LightBurn Material Settings, LightBurn Settings for Cutting. Publication date not printed by Ortur · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  29. Image Mode: Line Speed(mm/m): 120mm Power Min(%): 100 Perform Multiple Passes: 1

    Ortur, Ortur LightBurn Material Settings, LightBurn Settings for Cutting. Publication date not printed by Ortur · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  30. Image Mode: Line Speed(mm/m): 700mm Power Min(%): 100 Perform Multiple Passes: 1

    Ortur, Ortur LightBurn Material Settings, LightBurn Settings for Cutting. Publication date not printed by Ortur · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  31. Image Mode: Line Speed(mm/m): 500mm Power Min(%): 100 Perform Multiple Passes: 1

    Ortur, Ortur LightBurn Material Settings, LightBurn Settings for Cutting. Publication date not printed by Ortur · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  32. Image Mode: Line Speed(mm/m): 300mm Power Min(%): 100 Perform Multiple Passes: 1

    Ortur, Ortur LightBurn Material Settings, LightBurn Settings for Cutting. Publication date not printed by Ortur · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  33. Image Mode: Line Speed(mm/m): 250mm Power Min(%): 100 Perform Multiple Passes: 1

    Ortur, Ortur LightBurn Material Settings, LightBurn Settings for Cutting. Publication date not printed by Ortur · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  34. Image Mode: Line Speed(mm/m): 200mm Power Min(%): 100 Perform Multiple Passes: 1

    Ortur, Ortur LightBurn Material Settings, LightBurn Settings for Cutting. Publication date not printed by Ortur · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  35. Image Mode: Line Speed(mm/m): 1600mm Power Min(%): 100 Perform Multiple Passes: 1

    Ortur, Ortur LightBurn Material Settings, LightBurn Settings for Cutting. Publication date not printed by Ortur · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  36. Image Mode: Line Speed(mm/m): 1100mm Power Min(%): 100 Perform Multiple Passes: 1

    Ortur, Ortur LightBurn Material Settings, LightBurn Settings for Cutting. Publication date not printed by Ortur · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  37. Image Mode: Line Speed(mm/m): 700mm Power Min(%): 100 Perform Multiple Passes: 1

    Ortur, Ortur LightBurn Material Settings, LightBurn Settings for Cutting. Publication date not printed by Ortur · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  38. Image Mode: Line Speed(mm/m): 400mm Power Min(%): 100 Perform Multiple Passes: 1

    Ortur, Ortur LightBurn Material Settings, LightBurn Settings for Cutting. Publication date not printed by Ortur · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

Trotec Laser: Which materials are not suitable for laser cutting and engraving? (2 excerpts)

Which materials are not suitable for laser cutting and engraving?

Publication date not printed by Trotec Laser · Read · Captured

  1. Leather and artificial leather that contains chromium (VI)

    Trotec Laser, Which materials are not suitable for laser cutting and engraving?, Materials you should not process with a laser. Publication date not printed by Trotec Laser · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  2. There are some materials that should not be processed with a laser engraver or a laser cutter because of their chemical make-up. Processing these materials creates dangerous gases or dust.

    Trotec Laser, Which materials are not suitable for laser cutting and engraving?, Materials you should not process with a laser. Publication date not printed by Trotec Laser · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

xTool: Materialeinstellungen für xTool Maschinen (64 excerpts)

Materialeinstellungen für xTool Maschinen

Publication date not printed by xTool · Read · Captured

  1. Birkensperrholz | 3.0 | Schnitt | D1 Pro 10W | 100 / 3 / 1

    xTool, Materialeinstellungen für xTool Maschinen, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  2. Birkensperrholz | 3.0 | Vektorgravur | D1 Pro 10W | 50 / 30 / 1

    xTool, Materialeinstellungen für xTool Maschinen, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  3. Birkensperrholz | 3.0 | Rastergravur | D1 Pro 10W | 80 / 100 / 1

    xTool, Materialeinstellungen für xTool Maschinen, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  4. Dunkelrote Acrylglasplatte (undurchsichtig, glänzend) | 3.0 | Schnitt | D1 Pro 10W | 100 / 3 / 4

    xTool, Materialeinstellungen für xTool Maschinen, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  5. Dunkelrote Acrylglasplatte (undurchsichtig, glänzend) | 3.0 | Vektorgravur | D1 Pro 10W | 40 / 40 / 1

    xTool, Materialeinstellungen für xTool Maschinen, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  6. Dunkelrote Acrylglasplatte (undurchsichtig, glänzend) | 3.0 | Rastergravur | D1 Pro 10W | 80 / 50 / 1

    xTool, Materialeinstellungen für xTool Maschinen, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  7. Kiefernsperrholz | 3.0 | Schnitt | D1 Pro 10W | 100 / 4 / 2

    xTool, Materialeinstellungen für xTool Maschinen, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  8. Lindensperrholz | 3.0 | Schnitt | D1 Pro 10W | 100 / 3 / 2

    xTool, Materialeinstellungen für xTool Maschinen, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  9. Lindensperrholz | 6.0 | Schnitt | D1 Pro 10W | 100 / 2 / 4

    xTool, Materialeinstellungen für xTool Maschinen, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  10. Mahagonisperrholz | 3.0 | Schnitt | D1 Pro 10W | 100 / 4 / 3

    xTool, Materialeinstellungen für xTool Maschinen, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  11. Mandschurisches Eschensperrholz | 3.0 | Schnitt | D1 Pro 10W | 100 / 3 / 3

    xTool, Materialeinstellungen für xTool Maschinen, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  12. Rote Acrylglasplatte (transparent, glänzend) | 3.0 | Schnitt | D1 Pro 10W | 100 / 3 / 4

    xTool, Materialeinstellungen für xTool Maschinen, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  13. Rote Acrylglasplatte (transparent, glänzend) | 3.0 | Vektorgravur | D1 Pro 10W | 40 / 50 / 1

    xTool, Materialeinstellungen für xTool Maschinen, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  14. Rote Acrylglasplatte (transparent, glänzend) | 3.0 | Rastergravur | D1 Pro 10W | 60 / 50 / 1

    xTool, Materialeinstellungen für xTool Maschinen, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  15. Walnusssperrholz | 3.0 | Schnitt | D1 Pro 10W | 100 / 3 / 1

    xTool, Materialeinstellungen für xTool Maschinen, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  16. Walnusssperrholz | 3.0 | Vektorgravur | D1 Pro 10W | 50 / 30 / 1

    xTool, Materialeinstellungen für xTool Maschinen, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  17. Walnusssperrholz | 3.0 | Rastergravur | D1 Pro 10W | 80 / 100 / 1

    xTool, Materialeinstellungen für xTool Maschinen, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  18. Walnusssperrholz | 6.0 | Schnittt | D1 Pro 10W | 80 / 60 / 1

    xTool, Materialeinstellungen für xTool Maschinen, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  19. White oak plywood | 3.0 | Schnitt | D1 Pro 10W | 100 / 3 / 2

    xTool, Materialeinstellungen für xTool Maschinen, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  20. Birkensperrholz | 3.0 | Schnitt | D1 Pro 20W | 100 / 6 / 1

    xTool, Materialeinstellungen für xTool Maschinen, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  21. Birkensperrholz | 6.0 | Schnitt | D1 Pro 20W | 100 / 4 / 3

    xTool, Materialeinstellungen für xTool Maschinen, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  22. Braune Acrylglasplatte undurchsichtig glänzend | 2.0 | Schnitt | D1 Pro 20W | 100 / 5 / 3

    xTool, Materialeinstellungen für xTool Maschinen, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  23. Braune Acrylglasplatte undurchsichtig glänzend | 2.0 | Vektorgravur | D1 Pro 20W | 50 / 40 / 1

    xTool, Materialeinstellungen für xTool Maschinen, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  24. Braune Acrylglasplatte undurchsichtig glänzend | 2.0 | Rastergravur | D1 Pro 20W | 40 / 50 / 1

    xTool, Materialeinstellungen für xTool Maschinen, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  25. Dunkelrote Acrylglasplatte (undurchsichtig, glänzend) | 3.0 | Schnitt | D1 Pro 20W | 100 / 3 / 3

    xTool, Materialeinstellungen für xTool Maschinen, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  26. Dunkelrote Acrylglasplatte (undurchsichtig, glänzend) | 3.0 | Vektorgravur | D1 Pro 20W | 30 / 40 / 1

    xTool, Materialeinstellungen für xTool Maschinen, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  27. Dunkelrote Acrylglasplatte (undurchsichtig, glänzend) | 3.0 | Rastergravur | D1 Pro 20W | 40 / 50 / 1

    xTool, Materialeinstellungen für xTool Maschinen, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  28. Kiefernsperrholz | 3.0 | Schnitt | D1 Pro 20W | 100 / 5 / 1

    xTool, Materialeinstellungen für xTool Maschinen, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  29. Lindensperrholz | 3.0 | Schnitt | D1 Pro 20W | 100 / 6 / 1

    xTool, Materialeinstellungen für xTool Maschinen, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  30. Lindensperrholz | 3.0 | Vektorgravur | D1 Pro 20W | 80 / 60 / 1

    xTool, Materialeinstellungen für xTool Maschinen, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  31. Lindensperrholz | 3.0 | Rastergravur | D1 Pro 20W | 60 / 100 / 1

    xTool, Materialeinstellungen für xTool Maschinen, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  32. Lindensperrholz | 6.0 | Schnitt | D1 Pro 20W | 100 / 6 / 3

    xTool, Materialeinstellungen für xTool Maschinen, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  33. Mahagonisperrholz | 3.0 | Schnitt | D1 Pro 20W | 100 / 6 / 1

    xTool, Materialeinstellungen für xTool Maschinen, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  34. Mandschurisches Eschensperrholz | 3.0 | Schnitt | D1 Pro 20W | 100 / 4 / 1

    xTool, Materialeinstellungen für xTool Maschinen, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  35. Rote Acrylglasplatte (transparent, glänzend) | 3.0 | Schnitt | D1 Pro 20W | 100 / 3 / 3

    xTool, Materialeinstellungen für xTool Maschinen, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  36. Rote Acrylglasplatte (transparent, glänzend) | 3.0 | Vektorgravur | D1 Pro 20W | 30 / 40 / 1

    xTool, Materialeinstellungen für xTool Maschinen, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  37. Rote Acrylglasplatte (transparent, glänzend) | 3.0 | Rastergravur | D1 Pro 20W | 60 / 100 / 1

    xTool, Materialeinstellungen für xTool Maschinen, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  38. Walnusssperrholz | 3.0 | Schnitt | D1 Pro 20W | 100 / 4 / 1

    xTool, Materialeinstellungen für xTool Maschinen, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  39. Walnusssperrholz | 6.0 | Schnitt | D1 Pro 20W | 80 / 60 / 1

    xTool, Materialeinstellungen für xTool Maschinen, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  40. White oak plywood | 3.0 | Schnitt | D1 Pro 20W | 100 / 5 / 1

    xTool, Materialeinstellungen für xTool Maschinen, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  41. Blutrotes Acrylglas | 3.0 | Schnitt | D1 Pro 40W | 100 / 5 / 1

    xTool, Materialeinstellungen für xTool Maschinen, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  42. Kiefernsperrholz | 3.0 | Schnitt | D1 Pro 40W | 100 / 12 / 1

    xTool, Materialeinstellungen für xTool Maschinen, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  43. Kirschensperrholz | 3.0 | Schnitt | D1 Pro 40W | 100 / 12 / 1

    xTool, Materialeinstellungen für xTool Maschinen, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  44. Kraftpapier | 0.23mm | Schnitt | D1 Pro 40W | 60 / 60 / 1

    xTool, Materialeinstellungen für xTool Maschinen, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  45. Lindensperrholz | 3.0 | Schnitt | D1 Pro 40W | 100 / 13 / 1

    xTool, Materialeinstellungen für xTool Maschinen, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  46. Lindensperrholz | 8.0 | Schnitt | D1 Pro 40W | 100 / 6 / 1

    xTool, Materialeinstellungen für xTool Maschinen, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  47. Mandschurisches Eschensperrholz | 3.0 | Schnitt | D1 Pro 40W | 100 / 12 / 1

    xTool, Materialeinstellungen für xTool Maschinen, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  48. Schwarzes Acrylglas | 3.0 | Schnitt | D1 Pro 40W | 100 / 5 / 1

    xTool, Materialeinstellungen für xTool Maschinen, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  49. Walnusssperrholz | 3.0 | Schnitt | D1 Pro 40W | 100 / 12 / 1

    xTool, Materialeinstellungen für xTool Maschinen, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  50. Dunkelrote Acrylglasplatte (undurchsichtig, glänzend) | 3.0 | Schnitt | D1 Pro 5W | 100 / 1 / 3

    xTool, Materialeinstellungen für xTool Maschinen, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  51. Dunkelrote Acrylglasplatte (undurchsichtig, glänzend) | 3.0 | Rastergravur | D1 Pro 5W | 100 / 50 / 1

    xTool, Materialeinstellungen für xTool Maschinen, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  52. Kirschensperrholz | 3.0 | Schnitt | D1 Pro 5W | 100 / 2 / 2

    xTool, Materialeinstellungen für xTool Maschinen, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  53. Lindensperrholz | 3.0 | Schnitt | D1 Pro 5W | 100 / 2 / 2

    xTool, Materialeinstellungen für xTool Maschinen, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  54. Walnusssperrholz | 3.0 | Schnitt | D1 Pro 5W | 100 / 4 / 3

    xTool, Materialeinstellungen für xTool Maschinen, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  55. Lindenholz | 10.0 | Vektorschnitt | 20 W Blaulicht-Laser | 100/ 3 / 1

    xTool, Materialeinstellungen für xTool Maschinen, xTool S1. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  56. Lindenholz | 3.0 | Vektorschnitt | 20 W Blaulicht-Laser | 100 / 7 / 1

    xTool, Materialeinstellungen für xTool Maschinen, xTool S1. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  57. Lindenholz | 6.0 | Vektorschnitt | 20 W Blaulicht-Laser | 100 / 4 / 1

    xTool, Materialeinstellungen für xTool Maschinen, xTool S1. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  58. Schwarzes Acryl | 3.0 | Vektorschnitt | 20 W Blaulicht-Laser | 100 / 4 / 1

    xTool, Materialeinstellungen für xTool Maschinen, xTool S1. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  59. Lindenholz | 10.0 | Vektorschnitt | 40 W Blaulicht-Laser | 100 / 6 / 1

    xTool, Materialeinstellungen für xTool Maschinen, xTool S1. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  60. Lindenholz | 15.0 | Vektorschnitt | 40 W Blaulicht-Laser | 100 / 2 / 1

    xTool, Materialeinstellungen für xTool Maschinen, xTool S1. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  61. Lindenholz | 3.0 | Vektorschnitt | 40 W Blaulicht-Laser | 100 / 15 / 1

    xTool, Materialeinstellungen für xTool Maschinen, xTool S1. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  62. Lindenholz | 6.0 | Vektorschnitt | 40 W Blaulicht-Laser | 100 / 10 / 1

    xTool, Materialeinstellungen für xTool Maschinen, xTool S1. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  63. Schwarzes Acryl | 3.0 | Vektorschnitt | 40 W Blaulicht-Laser | 100 / 8 / 1

    xTool, Materialeinstellungen für xTool Maschinen, xTool S1. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  64. Schwarzes Acryl | 6.0 | Vektorschnitt | 40 W Blaulicht-Laser | 100 / 2 / 1

    xTool, Materialeinstellungen für xTool Maschinen, xTool S1. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

Cite this page: Diode Laser Settings by Material and Machine. CutChart. https://cutchart.com/settings/diode/ (sources read 2026-09-21 to 2026-10-02).

Reference information only. Follow the instructions for your exact machine and material. A listed setting does not establish that a job is safe. Read the safety limits.