CutChart / workshop reference
Laser Cutting Speed & Power Chart by Machine
278 manufacturer-published reference rows from Creality Falcon, Monport, OMTech, Ortur and xTool match this reference, read 2026-09-21. CutChart has not tested them. Each row links to its publisher’s document, and a field that document does not print is shown as not specified. Material safety statements are quoted from Creality, Epilog Laser, Trotec Laser and xTool.
Material safety statements from the sources
9 materials on this page carry quoted safety statements. Open a material to read its quotes in full.
Acrylic
The cited source documents conditions for acrylic. They apply to every acrylic row on this page.
6 quoted statements for acrylic
- Fire:
Experience shows that vector cutting with a laser is most likely to produce an open flame. In particular, acrylic has proven to be extremely flammable in vector cutting.
(xTool, S1 Safety First (Important), read 2026-09-21) - Fire:
Many materials are susceptible to igniting; however, acrylic (in all its forms), has shown to be especially flammable when vector cutting with the laser.
(Epilog Laser, Reducing Fire Hazards with your Laser, read 2026-09-21) - Fire:
Utilizing the Air Assist feature will reduce the instance of flare-ups when working with flammable materials such as acrylic and wood.
(Epilog Laser, Reducing Fire Hazards with your Laser, read 2026-09-21) - Ventilation:
Ensure that the workspace is well-ventilated so that the generated smoke can be discharged in time.
(xTool, S1 Safety First (Important), read 2026-09-21) - Fire:
It is forbidden to leave it unattended while the machine is working.
(Creality, Creality Falcon2 (12W/22W/40W) User Manual, read 2026-09-21) - Check the composition:
Do not engrave or cut any unknown materials.
(xTool, S1 Safety First (Important), read 2026-09-21)
Reviewed 2026-09-21; expires 2026-12-20. These statements are quoted from the publisher and are not a complete safety procedure.
Anodized aluminum
The cited source documents conditions for anodized aluminum. They apply to every anodized aluminum row on this page.
5 quoted statements for anodized aluminum
- Ventilation:
Smoke or smells may be produced during laser engraving and cutting. It is recommended to operate in a well-ventilated environment.
(Creality, Creality Falcon2 (12W/22W/40W) User Manual, read 2026-09-21) - Ventilation:
Ensure that the workspace is well-ventilated so that the generated smoke can be discharged in time.
(xTool, S1 Safety First (Important), read 2026-09-21) - Fire:
It is forbidden to leave it unattended while the machine is working.
(Creality, Creality Falcon2 (12W/22W/40W) User Manual, read 2026-09-21) - Fire:
Prepare fire extinguishers as a backup. Regularly maintain and inspect the fire extinguishers.
(Creality, Creality Falcon2 (12W/22W/40W) User Manual, read 2026-09-21) - Check the composition:
Do not engrave or cut any unknown materials.
(xTool, S1 Safety First (Important), read 2026-09-21)
Reviewed 2026-09-21; expires 2026-12-20. These statements are quoted from the publisher and are not a complete safety procedure.
Felt
The cited source documents conditions for felt. They apply to every felt row on this page.
6 quoted statements for felt
- Fire:
But most materials are inherently flammable and can be ignited, which may burn the machine and the surroundings.
(Creality, Creality Falcon2 (12W/22W/40W) User Manual, read 2026-09-21) - Ventilation:
Smoke or smells may be produced during laser engraving and cutting. It is recommended to operate in a well-ventilated environment.
(Creality, Creality Falcon2 (12W/22W/40W) User Manual, read 2026-09-21) - Fire:
It is forbidden to leave it unattended while the machine is working.
(Creality, Creality Falcon2 (12W/22W/40W) User Manual, read 2026-09-21) - Fire:
Prepare fire extinguishers as a backup. Regularly maintain and inspect the fire extinguishers.
(Creality, Creality Falcon2 (12W/22W/40W) User Manual, read 2026-09-21) - Check the composition:
Do not engrave or cut any unknown materials.
(xTool, S1 Safety First (Important), read 2026-09-21) - Check the composition:
To protect your health and the life of your machine, always obtain a MSDS for materials about which you are uncertain.
(Epilog Laser, Material Safety and your Laser, read 2026-09-21)
The cited safety pages do not name felt or its fibre; the Creality Falcon parameter rows print Red Felt without a composition.
Reviewed 2026-09-21; expires 2026-12-20. These statements are quoted from the publisher and are not a complete safety procedure.
Leather
6 quoted statements for leather
- Hazard:
There are some materials that should not be processed with a laser engraver or a laser cutter because of their chemical make-up. Processing these materials creates dangerous gases or dust.
(Trotec Laser, Which materials are not suitable for laser cutting and engraving?, read 2026-09-21) - Check the composition:
Leather and artificial leather that contains chromium (VI)
(Trotec Laser, Which materials are not suitable for laser cutting and engraving?, read 2026-09-21) - Check the composition:
Cardboard, wood, bamboo, rubber, leather, fabric, acrylic, plastic, etc.
(Creality, Creality Falcon2 (12W/22W/40W) User Manual, read 2026-09-21) - Ventilation:
Smoke or smells may be produced during laser engraving and cutting. It is recommended to operate in a well-ventilated environment.
(Creality, Creality Falcon2 (12W/22W/40W) User Manual, read 2026-09-21) - Fire:
It is forbidden to leave it unattended while the machine is working.
(Creality, Creality Falcon2 (12W/22W/40W) User Manual, read 2026-09-21) - Check the composition:
To protect your health and the life of your machine, always obtain a MSDS for materials about which you are uncertain.
(Epilog Laser, Material Safety and your Laser, read 2026-09-21)
Tanning method not stated by Creality Falcon.
Reviewed 2026-09-21; expires 2026-12-20. These statements are quoted from the publisher and are not a complete safety procedure.
Painted tile
The cited source documents conditions for painted tile. They apply to every painted tile row on this page.
5 quoted statements for painted tile
- Ventilation:
Smoke or smells may be produced during laser engraving and cutting. It is recommended to operate in a well-ventilated environment.
(Creality, Creality Falcon2 (12W/22W/40W) User Manual, read 2026-09-21) - Ventilation:
Ensure that the workspace is well-ventilated so that the generated smoke can be discharged in time.
(xTool, S1 Safety First (Important), read 2026-09-21) - Fire:
It is forbidden to leave it unattended while the machine is working.
(Creality, Creality Falcon2 (12W/22W/40W) User Manual, read 2026-09-21) - Check the composition:
Do not engrave or cut any unknown materials.
(xTool, S1 Safety First (Important), read 2026-09-21) - Check the composition:
To protect your health and the life of your machine, always obtain a MSDS for materials about which you are uncertain.
(Epilog Laser, Material Safety and your Laser, read 2026-09-21)
The cited safety pages do not name tile or paint; the Creality Falcon parameter rows print White Tile Painted Black without a paint composition.
Reviewed 2026-09-21; expires 2026-12-20. These statements are quoted from the publisher and are not a complete safety procedure.
Paper
The cited source documents conditions for paper. They apply to every paper row on this page.
5 quoted statements for paper
- Fire:
Do not stack materials (especially organic ones, such as paper) around the machine. They may cause the spread of flames and increase the risk of material ignition.
(xTool, S1 Safety First (Important), read 2026-09-21) - Fire:
But most materials are inherently flammable and can be ignited, which may burn the machine and the surroundings.
(Creality, Creality Falcon2 (12W/22W/40W) User Manual, read 2026-09-21) - Ventilation:
Smoke or smells may be produced during laser engraving and cutting. It is recommended to operate in a well-ventilated environment.
(Creality, Creality Falcon2 (12W/22W/40W) User Manual, read 2026-09-21) - Fire:
It is forbidden to leave it unattended while the machine is working.
(Creality, Creality Falcon2 (12W/22W/40W) User Manual, read 2026-09-21) - Fire:
Prepare fire extinguishers as a backup. Regularly maintain and inspect the fire extinguishers.
(Creality, Creality Falcon2 (12W/22W/40W) User Manual, read 2026-09-21)
Reviewed 2026-09-21; expires 2026-12-20. These statements are quoted from the publisher and are not a complete safety procedure.
Plywood
The cited source documents conditions for plywood. They apply to every plywood row on this page.
6 quoted statements for plywood
- Fire:
But most materials are inherently flammable and can be ignited, which may burn the machine and the surroundings.
(Creality, Creality Falcon2 (12W/22W/40W) User Manual, read 2026-09-21) - Ventilation:
Smoke or smells may be produced during laser engraving and cutting. It is recommended to operate in a well-ventilated environment.
(Creality, Creality Falcon2 (12W/22W/40W) User Manual, read 2026-09-21) - Fire:
It is forbidden to leave it unattended while the machine is working.
(Creality, Creality Falcon2 (12W/22W/40W) User Manual, read 2026-09-21) - Fire:
Never operate the laser system unattended.
(Epilog Laser, Reducing Fire Hazards with your Laser, read 2026-09-21) - Check the composition:
Do not engrave or cut any unknown materials.
(xTool, S1 Safety First (Important), read 2026-09-21) - Check the composition:
To protect your health and the life of your machine, always obtain a MSDS for materials about which you are uncertain.
(Epilog Laser, Material Safety and your Laser, read 2026-09-21)
The cited safety pages name wood but not plywood or its adhesive; the Creality Falcon parameter rows print Walnut Plywood and Rosewood Plywood without a glue type.
Reviewed 2026-09-21; expires 2026-12-20. These statements are quoted from the publisher and are not a complete safety procedure.
Stainless steel
The cited source documents conditions for stainless steel. They apply to every stainless steel row on this page.
5 quoted statements for stainless steel
- Ventilation:
Smoke or smells may be produced during laser engraving and cutting. It is recommended to operate in a well-ventilated environment.
(Creality, Creality Falcon2 (12W/22W/40W) User Manual, read 2026-09-21) - Ventilation:
Ensure that the workspace is well-ventilated so that the generated smoke can be discharged in time.
(xTool, S1 Safety First (Important), read 2026-09-21) - Fire:
It is forbidden to leave it unattended while the machine is working.
(Creality, Creality Falcon2 (12W/22W/40W) User Manual, read 2026-09-21) - Fire:
Prepare fire extinguishers as a backup. Regularly maintain and inspect the fire extinguishers.
(Creality, Creality Falcon2 (12W/22W/40W) User Manual, read 2026-09-21) - Check the composition:
Do not engrave or cut any unknown materials.
(xTool, S1 Safety First (Important), read 2026-09-21)
Reviewed 2026-09-21; expires 2026-12-20. These statements are quoted from the publisher and are not a complete safety procedure.
Wood
The cited source documents conditions for wood. They apply to every wood row on this page.
6 quoted statements for wood
- Fire:
Utilizing the Air Assist feature will reduce the instance of flare-ups when working with flammable materials such as acrylic and wood.
(Epilog Laser, Reducing Fire Hazards with your Laser, read 2026-09-21) - Fire:
Since most users cut wood and acrylic, these small pieces that fall into the table tray act just like kindling and can ignite and start a fire.
(Epilog Laser, Reducing Fire Hazards with your Laser, read 2026-09-21) - Fire:
But most materials are inherently flammable and can be ignited, which may burn the machine and the surroundings.
(Creality, Creality Falcon2 (12W/22W/40W) User Manual, read 2026-09-21) - Ventilation:
Smoke or smells may be produced during laser engraving and cutting. It is recommended to operate in a well-ventilated environment.
(Creality, Creality Falcon2 (12W/22W/40W) User Manual, read 2026-09-21) - Fire:
It is forbidden to leave it unattended while the machine is working.
(Creality, Creality Falcon2 (12W/22W/40W) User Manual, read 2026-09-21) - Check the composition:
Do not engrave or cut any unknown materials.
(xTool, S1 Safety First (Important), read 2026-09-21)
Reviewed 2026-09-21; expires 2026-12-20. These statements are quoted from the publisher and are not a complete safety procedure.
Source-documented settings
Manufacturer-published reference parameters, not tested by CutChart
Match the machine, material and operation before reading a value. Speed is shown in the source unit and in mm/s, rounded to two decimals. Each row names its publisher and the date we read the document. A field the publisher does not print is shown as not specified; CutChart never fills it in.
| Machine | Thickness | Material as printed | Operation | Speed | Power | Passes | Fields the table does not print | Source and status |
|---|---|---|---|---|---|---|---|---|
| Falcon2 12W | 0.15 mm material | Kraft Paper | engrave | 4000 mm/min (66.67 mm/s) | 15% | 1 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 22W | 0.15 mm material | Kraft Paper | engrave | 6000 mm/min (100 mm/s) | 18% | 1 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 40W (Normal mode) | 0.15 mm material | Kraft Paper | engrave | 6000 mm/min (100 mm/s) | 12% | 1 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 12W | 0.2 mm material | Kraft Paper | cut | 4000 mm/min (66.67 mm/s) | 100% | 1 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 12W | 0.2 mm material | Red Card Paper | cut | 4000 mm/min (66.67 mm/s) | 100% | 1 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 12W | 0.2 mm material | Red Card Paper | engrave | 4000 mm/min (66.67 mm/s) | 15% | 1 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 22W | 0.2 mm material | Kraft Paper | cut | 4000 mm/min (66.67 mm/s) | 80% | 1 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 22W | 0.2 mm material | Red Card Paper | cut | 4000 mm/min (66.67 mm/s) | 50% | 1 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 22W | 0.2 mm material | Red Card Paper | engrave | 6000 mm/min (100 mm/s) | 15% | 1 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 40W (Normal mode) | 0.2 mm material | Kraft Paper | cut | 4000 mm/min (66.67 mm/s) | 40% | 1 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 40W (Normal mode) | 0.2 mm material | Red Card Paper | cut | 4000 mm/min (66.67 mm/s) | 30% | 1 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 40W (Normal mode) | 0.2 mm material | Red Card Paper | engrave | 6000 mm/min (100 mm/s) | 8% | 1 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| D1 Pro 40W | 0.23 mm material | Kraft Paper | cut | 60 mm/s (60 mm/s) | 60% | 1 |
| xTool, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 12W | 0.65 mm material | Brown Leather | cut | 2000 mm/min (33.33 mm/s) | 100% | 1 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 12W | 0.65 mm material | Brown Leather | engrave | 4000 mm/min (66.67 mm/s) | 20% | 1 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 22W | 0.65 mm material | Brown Leather | cut | 2000 mm/min (33.33 mm/s) | 100% | 1 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 22W | 0.65 mm material | Brown Leather | engrave | 6000 mm/min (100 mm/s) | 18% | 1 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 40W (Normal mode) | 0.65 mm material | Brown Leather | cut | 4000 mm/min (66.67 mm/s) | 70% | 1 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 40W (Normal mode) | 0.65 mm material | Brown Leather | engrave | 6000 mm/min (100 mm/s) | 12% | 1 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 12W | 0.8 mm material | Red Felt | cut | 3800 mm/min (63.33 mm/s) | 100% | 1 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 12W | 0.8 mm material | Red Felt | engrave | 4000 mm/min (66.67 mm/s) | 15% | 1 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 22W | 0.8 mm material | Red Felt | cut | 4000 mm/min (66.67 mm/s) | 55% | 1 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 22W | 0.8 mm material | Red Felt | engrave | 6000 mm/min (100 mm/s) | 13% | 1 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 40W (Normal mode) | 0.8 mm material | Red Felt | cut | 4000 mm/min (66.67 mm/s) | 35% | 1 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 40W (Normal mode) | 0.8 mm material | Red Felt | engrave | 6000 mm/min (100 mm/s) | 7% | 1 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Monport 40W CO2 Laser Engraver | 1 mm material | Acrylic | cut | 13 mm/s (13 mm/s) | 20% | Not specified by Monport |
| Monport, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Monport 40W CO2 Laser Engraver | 1 mm material | Leather | cut | 25 mm/s (25 mm/s) | 20% | Not specified by Monport |
| Monport, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Monport 40W CO2 Laser Engraver | 1 mm material | Plywood | cut | 17 mm/s (17 mm/s) | 20% | Not specified by Monport |
| Monport, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| ONYX-R | 1.5 mm material | Leather | cut | 80 mm/s (80 mm/s) | 90% | Not specified by Monport |
| Monport, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| ONYX-R | 1.5 mm material | Leather | engrave | 500 mm/s (500 mm/s) | 30% | Not specified by Monport |
| Monport, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| OMTech Polar 350 | 1.5 mm material | Leather | cut | 80 mm/s (80 mm/s) | 90% | Not specified by OMTech |
| OMTech, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| OMTech Polar 350 | 1.5 mm material | Leather | engrave | 500 mm/s (500 mm/s) | 30% | Not specified by OMTech |
| OMTech, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| LU2-10A (10W) | 1.6 mm material | Plywood | cut | 500 mm/min (8.33 mm/s) | 100% | 1 |
| Ortur, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| LU3-20A/B (20W) | 1.6 mm material | Plywood | cut | 600 mm/min (10 mm/s) | 100% | 1 |
| Ortur, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| LU3-40A (40W) | 1.6 mm material | Plywood | cut | 1600 mm/min (26.67 mm/s) | 100% | 1 |
| Ortur, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 12W | 2 mm material | Basswood | cut | 400 mm/min (6.67 mm/s) | 100% | 1 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 12W | 2 mm material | Basswood | engrave | 4000 mm/min (66.67 mm/s) | 40% | 1 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 12W | 2 mm material | Brushed Stainless Steel | engrave | 800 mm/min (13.33 mm/s) | 100% | 1 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 22W | 2 mm material | Basswood | cut | 700 mm/min (11.67 mm/s) | 100% | 1 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 22W | 2 mm material | Basswood | engrave | 6000 mm/min (100 mm/s) | 40% | 1 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 22W | 2 mm material | Brushed Stainless Steel | engrave | 6000 mm/min (100 mm/s) | 80% | 1 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 40W (Normal mode) | 2 mm material | Basswood | cut | 1000 mm/min (16.67 mm/s) | 100% | 1 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 40W (Normal mode) | 2 mm material | Basswood | engrave | 6000 mm/min (100 mm/s) | 25% | 1 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 40W (Normal mode) | 2 mm material | Brushed Stainless Steel | engrave | 6000 mm/min (100 mm/s) | 40% | 1 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Monport 40W CO2 Laser Engraver | 2 mm material | Acrylic | cut | 11 mm/s (11 mm/s) | 23% | Not specified by Monport |
| Monport, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Monport 40W CO2 Laser Engraver | 2 mm material | Leather | cut | 20 mm/s (20 mm/s) | 22% | Not specified by Monport |
| Monport, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Monport 40W CO2 Laser Engraver | 2 mm material | Plywood | cut | 15 mm/s (15 mm/s) | 23% | Not specified by Monport |
| Monport, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| D1 Pro 20W | 2 mm material | Brown Opaque Glossy Acrylic | cut | 5 mm/s (5 mm/s) | 100% | 3 |
| xTool, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| D1 Pro 20W | 2 mm material | Brown Opaque Glossy Acrylic | engrave | 40 mm/s (40 mm/s) | 50% | 1 |
| xTool, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| D1 Pro 20W | 2 mm material | Brown Opaque Glossy Acrylic | fill | 50 mm/s (50 mm/s) | 40% | 1 |
| xTool, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| LU2-10A (10W) | 2.8 mm material | Plywood | cut | 300 mm/min (5 mm/s) | 100% | 1 |
| Ortur, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| LU3-20A/B (20W) | 2.8 mm material | Plywood | cut | 500 mm/min (8.33 mm/s) | 100% | 1 |
| Ortur, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| LU3-40A (40W) | 2.8 mm material | Plywood | cut | 1100 mm/min (18.33 mm/s) | 100% | 1 |
| Ortur, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 12W | 3 mm material | Anodized Aluminum | engrave | 250 mm/min (4.17 mm/s) | 100% | 1 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 12W | 3 mm material | Bamboo | cut | 280 mm/min (4.67 mm/s) | 100% | 1 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 12W | 3 mm material | Bamboo | engrave | 4000 mm/min (66.67 mm/s) | 40% | 1 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 12W | 3 mm material | Basswood | cut | 300 mm/min (5 mm/s) | 100% | 1 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 12W | 3 mm material | Black Frosted Acrylic | cut | 200 mm/min (3.33 mm/s) | 95% | 1 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 12W | 3 mm material | Black Frosted Acrylic | engrave | 3000 mm/min (50 mm/s) | 80% | 1 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 12W | 3 mm material | Black Opaque Glossy Acrylic | engrave | 4000 mm/min (66.67 mm/s) | 80% | 1 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 12W | 3 mm material | Green Frosted Acrylic | cut | 120 mm/min (2 mm/s) | 95% | 3 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 12W | 3 mm material | Green Frosted Acrylic | engrave | 1200 mm/min (20 mm/s) | 90% | 1 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 12W | 3 mm material | Green Opaque Glossy Acrylic | cut | 120 mm/min (2 mm/s) | 95% | 3 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 12W | 3 mm material | Green Opaque Glossy Acrylic | engrave | 4000 mm/min (66.67 mm/s) | 50% | 1 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 12W | 3 mm material | Green Transparent Acrylic | cut | 120 mm/min (2 mm/s) | 95% | 3 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 12W | 3 mm material | Green Transparent Acrylic | engrave | 3000 mm/min (50 mm/s) | 40% | 1 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 12W | 3 mm material | Orange Frosted Acrylic | cut | 120 mm/min (2 mm/s) | 95% | 3 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 12W | 3 mm material | Orange Frosted Acrylic | engrave | 1200 mm/min (20 mm/s) | 90% | 1 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 12W | 3 mm material | Orange Opaque Glossy Acrylic | cut | 120 mm/min (2 mm/s) | 95% | 2 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 12W | 3 mm material | Orange Opaque Glossy Acrylic | engrave | 4000 mm/min (66.67 mm/s) | 50% | 1 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 12W | 3 mm material | Purple Frosted Acrylic | cut | 120 mm/min (2 mm/s) | 95% | 3 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 12W | 3 mm material | Purple Frosted Acrylic | engrave | 1000 mm/min (16.67 mm/s) | 90% | 1 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 12W | 3 mm material | Purple Opaque Glossy Acrylic | cut | 120 mm/min (2 mm/s) | 95% | 2 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 12W | 3 mm material | Purple Opaque Glossy Acrylic | engrave | 4000 mm/min (66.67 mm/s) | 50% | 1 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 12W | 3 mm material | Red Opaque Glossy Acrylic | cut | 120 mm/min (2 mm/s) | 95% | 1 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 12W | 3 mm material | Red Opaque Glossy Acrylic | engrave | 4000 mm/min (66.67 mm/s) | 50% | 1 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 12W | 3 mm material | Red Transparent Acrylic | cut | 120 mm/min (2 mm/s) | 95% | 3 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 12W | 3 mm material | Red Transparent Acrylic | engrave | 3000 mm/min (50 mm/s) | 40% | 1 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 12W | 3 mm material | Rosewood Plywood | cut | 280 mm/min (4.67 mm/s) | 100% | 1 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 12W | 3 mm material | Rosewood Plywood | engrave | 4000 mm/min (66.67 mm/s) | 35% | 1 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 12W | 3 mm material | Walnut Plywood | cut | 280 mm/min (4.67 mm/s) | 100% | 1 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 12W | 3 mm material | Walnut Plywood | engrave | 4000 mm/min (66.67 mm/s) | 35% | 1 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 12W | 3 mm material | Yellow Transparent Acrylic | cut | 120 mm/min (2 mm/s) | 95% | 2 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 12W | 3 mm material | Yellow Transparent Acrylic | engrave | 3000 mm/min (50 mm/s) | 40% | 1 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 22W | 3 mm material | Anodized Aluminum | engrave | 6000 mm/min (100 mm/s) | 60% | 1 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 22W | 3 mm material | Bamboo | cut | 450 mm/min (7.5 mm/s) | 100% | 1 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 22W | 3 mm material | Bamboo | engrave | 6000 mm/min (100 mm/s) | 40% | 1 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 22W | 3 mm material | Basswood | cut | 550 mm/min (9.17 mm/s) | 100% | 1 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 22W | 3 mm material | Black Frosted Acrylic | cut | 180 mm/min (3 mm/s) | 55% | 1 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 22W | 3 mm material | Black Frosted Acrylic | engrave | 3000 mm/min (50 mm/s) | 40% | 1 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 22W | 3 mm material | Black Opaque Glossy Acrylic | engrave | 4000 mm/min (66.67 mm/s) | 50% | 1 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 22W | 3 mm material | Green Frosted Acrylic | cut | 120 mm/min (2 mm/s) | 55% | 3 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 22W | 3 mm material | Green Frosted Acrylic | engrave | 1200 mm/min (20 mm/s) | 60% | 1 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 22W | 3 mm material | Green Opaque Glossy Acrylic | cut | 120 mm/min (2 mm/s) | 55% | 3 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 22W | 3 mm material | Green Opaque Glossy Acrylic | engrave | 6000 mm/min (100 mm/s) | 50% | 1 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 22W | 3 mm material | Green Transparent Acrylic | cut | 120 mm/min (2 mm/s) | 55% | 3 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 22W | 3 mm material | Green Transparent Acrylic | engrave | 3000 mm/min (50 mm/s) | 20% | 1 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 22W | 3 mm material | Orange Frosted Acrylic | cut | 120 mm/min (2 mm/s) | 55% | 3 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 22W | 3 mm material | Orange Frosted Acrylic | engrave | 1200 mm/min (20 mm/s) | 60% | 1 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 22W | 3 mm material | Orange Opaque Glossy Acrylic | cut | 120 mm/min (2 mm/s) | 55% | 2 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 22W | 3 mm material | Orange Opaque Glossy Acrylic | engrave | 6000 mm/min (100 mm/s) | 50% | 1 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 22W | 3 mm material | Purple Frosted Acrylic | cut | 120 mm/min (2 mm/s) | 55% | 3 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 22W | 3 mm material | Purple Frosted Acrylic | engrave | 1000 mm/min (16.67 mm/s) | 60% | 1 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 22W | 3 mm material | Purple Opaque Glossy Acrylic | cut | 120 mm/min (2 mm/s) | 55% | 2 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 22W | 3 mm material | Purple Opaque Glossy Acrylic | engrave | 6000 mm/min (100 mm/s) | 50% | 1 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 22W | 3 mm material | Red Opaque Glossy Acrylic | cut | 120 mm/min (2 mm/s) | 55% | 1 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 22W | 3 mm material | Red Opaque Glossy Acrylic | engrave | 6000 mm/min (100 mm/s) | 50% | 1 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 22W | 3 mm material | Red Transparent Acrylic | cut | 120 mm/min (2 mm/s) | 55% | 3 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 22W | 3 mm material | Red Transparent Acrylic | engrave | 3000 mm/min (50 mm/s) | 20% | 1 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 22W | 3 mm material | Rosewood Plywood | cut | 450 mm/min (7.5 mm/s) | 100% | 1 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 22W | 3 mm material | Rosewood Plywood | engrave | 6000 mm/min (100 mm/s) | 35% | 1 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 22W | 3 mm material | Walnut Plywood | cut | 450 mm/min (7.5 mm/s) | 100% | 1 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 22W | 3 mm material | Walnut Plywood | engrave | 6000 mm/min (100 mm/s) | 35% | 1 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 22W | 3 mm material | Yellow Transparent Acrylic | cut | 120 mm/min (2 mm/s) | 55% | 2 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 22W | 3 mm material | Yellow Transparent Acrylic | engrave | 3000 mm/min (50 mm/s) | 20% | 1 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 40W (Normal mode) | 3 mm material | Anodized Aluminum | engrave | 6000 mm/min (100 mm/s) | 30% | 1 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 40W (Normal mode) | 3 mm material | Bamboo | engrave | 6000 mm/min (100 mm/s) | 25% | 1 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 40W (Normal mode) | 3 mm material | Basswood | cut | 850 mm/min (14.17 mm/s) | 100% | 1 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 40W (Normal mode) | 3 mm material | Black Frosted Acrylic | cut | 180 mm/min (3 mm/s) | 30% | 1 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 40W (Normal mode) | 3 mm material | Black Frosted Acrylic | engrave | 3000 mm/min (50 mm/s) | 22% | 1 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 40W (Normal mode) | 3 mm material | Black Opaque Glossy Acrylic | engrave | 4000 mm/min (66.67 mm/s) | 26% | 1 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 40W (Normal mode) | 3 mm material | Green Frosted Acrylic | cut | 120 mm/min (2 mm/s) | 30% | 3 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 40W (Normal mode) | 3 mm material | Green Frosted Acrylic | engrave | 1200 mm/min (20 mm/s) | 30% | 1 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 40W (Normal mode) | 3 mm material | Green Opaque Glossy Acrylic | cut | 120 mm/min (2 mm/s) | 30% | 3 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 40W (Normal mode) | 3 mm material | Green Opaque Glossy Acrylic | engrave | 6000 mm/min (100 mm/s) | 26% | 1 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 40W (Normal mode) | 3 mm material | Green Transparent Acrylic | cut | 120 mm/min (2 mm/s) | 30% | 3 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 40W (Normal mode) | 3 mm material | Green Transparent Acrylic | engrave | 3000 mm/min (50 mm/s) | 12% | 1 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 40W (Normal mode) | 3 mm material | Orange Frosted Acrylic | cut | 120 mm/min (2 mm/s) | 30% | 3 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 40W (Normal mode) | 3 mm material | Orange Frosted Acrylic | engrave | 1200 mm/min (20 mm/s) | 30% | 1 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 40W (Normal mode) | 3 mm material | Orange Opaque Glossy Acrylic | cut | 120 mm/min (2 mm/s) | 30% | 2 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 40W (Normal mode) | 3 mm material | Orange Opaque Glossy Acrylic | engrave | 6000 mm/min (100 mm/s) | 26% | 1 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 40W (Normal mode) | 3 mm material | Purple Frosted Acrylic | cut | 120 mm/min (2 mm/s) | 30% | 3 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 40W (Normal mode) | 3 mm material | Purple Frosted Acrylic | engrave | 1000 mm/min (16.67 mm/s) | 30% | 1 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 40W (Normal mode) | 3 mm material | Purple Opaque Glossy Acrylic | cut | 120 mm/min (2 mm/s) | 30% | 2 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 40W (Normal mode) | 3 mm material | Purple Opaque Glossy Acrylic | engrave | 6000 mm/min (100 mm/s) | 26% | 1 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 40W (Normal mode) | 3 mm material | Red Opaque Glossy Acrylic | cut | 120 mm/min (2 mm/s) | 30% | 1 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 40W (Normal mode) | 3 mm material | Red Opaque Glossy Acrylic | engrave | 6000 mm/min (100 mm/s) | 26% | 1 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 40W (Normal mode) | 3 mm material | Red Transparent Acrylic | cut | 120 mm/min (2 mm/s) | 30% | 3 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 40W (Normal mode) | 3 mm material | Red Transparent Acrylic | engrave | 3000 mm/min (50 mm/s) | 12% | 1 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 40W (Normal mode) | 3 mm material | Rosewood Plywood | cut | 750 mm/min (12.5 mm/s) | 100% | 1 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 40W (Normal mode) | 3 mm material | Rosewood Plywood | engrave | 6000 mm/min (100 mm/s) | 20% | 1 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 40W (Normal mode) | 3 mm material | Walnut Plywood | cut | 750 mm/min (12.5 mm/s) | 100% | 1 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 40W (Normal mode) | 3 mm material | Walnut Plywood | engrave | 6000 mm/min (100 mm/s) | 20% | 1 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 40W (Normal mode) | 3 mm material | Yellow Transparent Acrylic | cut | 120 mm/min (2 mm/s) | 30% | 2 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 40W (Normal mode) | 3 mm material | Yellow Transparent Acrylic | engrave | 3000 mm/min (50 mm/s) | 12% | 1 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Monport 40W CO2 Laser Engraver | 3 mm material | Acrylic | cut | 9 mm/s (9 mm/s) | 25% | Not specified by Monport |
| Monport, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Monport 40W CO2 Laser Engraver | 3 mm material | Leather | cut | 15 mm/s (15 mm/s) | 25% | Not specified by Monport |
| Monport, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Monport 40W CO2 Laser Engraver | 3 mm material | Plywood | cut | 13 mm/s (13 mm/s) | 25% | Not specified by Monport |
| Monport, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| ONYX-R | 3 mm material | Acrylic | cut | 35 mm/s (35 mm/s) | 90% | Not specified by Monport |
| Monport, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| ONYX-R | 3 mm material | Acrylic | engrave | 500 mm/s (500 mm/s) | 50% | Not specified by Monport |
| Monport, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| ONYX-R | 3 mm material | Basswood | cut | 65 mm/s (65 mm/s) | 90% | Not specified by Monport |
| Monport, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| ONYX-R | 3 mm material | Basswood | engrave | 500 mm/s (500 mm/s) | 50% | Not specified by Monport |
| Monport, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| OMTech Polar 350 | 3 mm material | Acrylic | cut | 35 mm/s (35 mm/s) | 90% | Not specified by OMTech |
| OMTech, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| OMTech Polar 350 | 3 mm material | Acrylic | engrave | 500 mm/s (500 mm/s) | 50% | Not specified by OMTech |
| OMTech, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| OMTech Polar 350 | 3 mm material | Basswood | cut | 65 mm/s (65 mm/s) | 90% | Not specified by OMTech |
| OMTech, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| OMTech Polar 350 | 3 mm material | Basswood | engrave | 500 mm/s (500 mm/s) | 50% | Not specified by OMTech |
| OMTech, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| LU2-10A (10W) | 3 mm material | Pine | cut | 300 mm/min (5 mm/s) | 100% | 1 |
| Ortur, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| LU3-20A/B (20W) | 3 mm material | Pine | cut | 500 mm/min (8.33 mm/s) | 100% | 1 |
| Ortur, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| LU3-40A (40W) | 3 mm material | Pine | cut | 700 mm/min (11.67 mm/s) | 100% | 1 |
| Ortur, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| D1 Pro 10W | 3 mm material | Basswood plywood | cut | 3 mm/s (3 mm/s) | 100% | 2 |
| xTool, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| D1 Pro 10W | 3 mm material | Birch Plywood | cut | 3 mm/s (3 mm/s) | 100% | 1 |
| xTool, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| D1 Pro 10W | 3 mm material | Birch Plywood | engrave | 30 mm/s (30 mm/s) | 50% | 1 |
| xTool, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| D1 Pro 10W | 3 mm material | Birch Plywood | fill | 100 mm/s (100 mm/s) | 80% | 1 |
| xTool, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| D1 Pro 10W | 3 mm material | Dark Red Acrylic Sheet（Opaque,Glossy) | cut | 3 mm/s (3 mm/s) | 100% | 4 |
| xTool, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| D1 Pro 10W | 3 mm material | Dark Red Acrylic Sheet（Opaque,Glossy) | engrave | 40 mm/s (40 mm/s) | 40% | 1 |
| xTool, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| D1 Pro 10W | 3 mm material | Dark Red Acrylic Sheet（Opaque,Glossy) | fill | 50 mm/s (50 mm/s) | 80% | 1 |
| xTool, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| D1 Pro 10W | 3 mm material | Fraxinus Mandshurica Plywood | cut | 3 mm/s (3 mm/s) | 100% | 3 |
| xTool, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| D1 Pro 10W | 3 mm material | Mahogany Plywood | cut | 4 mm/s (4 mm/s) | 100% | 3 |
| xTool, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| D1 Pro 10W | 3 mm material | Pine Plywood | cut | 4 mm/s (4 mm/s) | 100% | 2 |
| xTool, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| D1 Pro 10W | 3 mm material | Red Acrylic Sheet (Transparent, Glossy) | cut | 3 mm/s (3 mm/s) | 100% | 4 |
| xTool, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| D1 Pro 10W | 3 mm material | Red Acrylic Sheet (Transparent, Glossy) | engrave | 50 mm/s (50 mm/s) | 40% | 1 |
| xTool, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| D1 Pro 10W | 3 mm material | Red Acrylic Sheet (Transparent, Glossy) | fill | 50 mm/s (50 mm/s) | 60% | 1 |
| xTool, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| D1 Pro 10W | 3 mm material | Walnut Plywood | cut | 3 mm/s (3 mm/s) | 100% | 1 |
| xTool, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| D1 Pro 10W | 3 mm material | Walnut Plywood | engrave | 30 mm/s (30 mm/s) | 50% | 1 |
| xTool, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| D1 Pro 10W | 3 mm material | Walnut Plywood | fill | 100 mm/s (100 mm/s) | 80% | 1 |
| xTool, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| D1 Pro 10W | 3 mm material | White oak plywood | cut | 3 mm/s (3 mm/s) | 100% | 2 |
| xTool, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| D1 Pro 20W | 3 mm material | Basswood plywood | cut | 6 mm/s (6 mm/s) | 100% | 1 |
| xTool, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| D1 Pro 20W | 3 mm material | Basswood plywood | engrave | 60 mm/s (60 mm/s) | 80% | 1 |
| xTool, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| D1 Pro 20W | 3 mm material | Basswood plywood | fill | 100 mm/s (100 mm/s) | 60% | 1 |
| xTool, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| D1 Pro 20W | 3 mm material | Birch Plywood | cut | 6 mm/s (6 mm/s) | 100% | 1 |
| xTool, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| D1 Pro 20W | 3 mm material | Dark Red Acrylic Sheet（Opaque,Glossy) | cut | 3 mm/s (3 mm/s) | 100% | 3 |
| xTool, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| D1 Pro 20W | 3 mm material | Dark Red Acrylic Sheet（Opaque,Glossy) | engrave | 40 mm/s (40 mm/s) | 30% | 1 |
| xTool, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| D1 Pro 20W | 3 mm material | Dark Red Acrylic Sheet（Opaque,Glossy) | fill | 50 mm/s (50 mm/s) | 40% | 1 |
| xTool, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| D1 Pro 20W | 3 mm material | Fraxinus Mandshurica Plywood | cut | 4 mm/s (4 mm/s) | 100% | 1 |
| xTool, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| D1 Pro 20W | 3 mm material | Mahogany Plywood | cut | 6 mm/s (6 mm/s) | 100% | 1 |
| xTool, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| D1 Pro 20W | 3 mm material | Pine Plywood | cut | 5 mm/s (5 mm/s) | 100% | 1 |
| xTool, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| D1 Pro 20W | 3 mm material | Red Acrylic Sheet (Transparent, Glossy) | cut | 3 mm/s (3 mm/s) | 100% | 3 |
| xTool, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| D1 Pro 20W | 3 mm material | Red Acrylic Sheet (Transparent, Glossy) | engrave | 40 mm/s (40 mm/s) | 30% | 1 |
| xTool, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| D1 Pro 20W | 3 mm material | Red Acrylic Sheet (Transparent, Glossy) | fill | 100 mm/s (100 mm/s) | 60% | 1 |
| xTool, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| D1 Pro 20W | 3 mm material | Walnut Plywood | cut | 4 mm/s (4 mm/s) | 100% | 1 |
| xTool, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| D1 Pro 20W | 3 mm material | White oak plywood | cut | 5 mm/s (5 mm/s) | 100% | 1 |
| xTool, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| D1 Pro 40W | 3 mm material | Basswood plywood | cut | 13 mm/s (13 mm/s) | 100% | 1 |
| xTool, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| D1 Pro 40W | 3 mm material | Black Acrylic | cut | 5 mm/s (5 mm/s) | 100% | 1 |
| xTool, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| D1 Pro 40W | 3 mm material | Blood Red Acrylic | cut | 5 mm/s (5 mm/s) | 100% | 1 |
| xTool, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| D1 Pro 40W | 3 mm material | Cherry Plywood | cut | 12 mm/s (12 mm/s) | 100% | 1 |
| xTool, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| D1 Pro 40W | 3 mm material | Fraxinus Mandshurica Plywood | cut | 12 mm/s (12 mm/s) | 100% | 1 |
| xTool, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| D1 Pro 40W | 3 mm material | Pine Plywood | cut | 12 mm/s (12 mm/s) | 100% | 1 |
| xTool, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| D1 Pro 40W | 3 mm material | Walnut Plywood | cut | 12 mm/s (12 mm/s) | 100% | 1 |
| xTool, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| D1 Pro 5W | 3 mm material | Basswood plywood | cut | 2 mm/s (2 mm/s) | 100% | 2 |
| xTool, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| D1 Pro 5W | 3 mm material | Cherry Plywood | cut | 2 mm/s (2 mm/s) | 100% | 2 |
| xTool, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| D1 Pro 5W | 3 mm material | Dark Red Acrylic Sheet（Opaque,Glossy) | cut | 1 mm/s (1 mm/s) | 100% | 3 |
| xTool, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| D1 Pro 5W | 3 mm material | Dark Red Acrylic Sheet（Opaque,Glossy) | fill | 50 mm/s (50 mm/s) | 100% | 1 |
| xTool, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| D1 Pro 5W | 3 mm material | Walnut Plywood | cut | 4 mm/s (4 mm/s) | 100% | 3 |
| xTool, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| xTool S1 20W blue module | 3 mm material | Basswood | cut | 7 mm/s (7 mm/s) | 100% | 1 |
| xTool, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| xTool S1 20W blue module | 3 mm material | Black acrylic | cut | 4 mm/s (4 mm/s) | 100% | 1 |
| xTool, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| xTool S1 40W blue module | 3 mm material | Basswood | cut | 15 mm/s (15 mm/s) | 100% | 1 |
| xTool, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| xTool S1 40W blue module | 3 mm material | Black acrylic | cut | 8 mm/s (8 mm/s) | 100% | 1 |
| xTool, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Monport 40W CO2 Laser Engraver | 4 mm material | Acrylic | cut | 7 mm/s (7 mm/s) | 35% | Not specified by Monport |
| Monport, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Monport 40W CO2 Laser Engraver | 4 mm material | Plywood | cut | 7 mm/s (7 mm/s) | 35% | Not specified by Monport |
| Monport, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 12W | 4.6 mm material | Black Acrylic | cut | 300 mm/min (5 mm/s) | 100% | 2 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 22W | 4.6 mm material | Black Acrylic | cut | 120 mm/min (2 mm/s) | 100% | 1 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 40W (Normal mode) | 4.6 mm material | Black Acrylic | cut | 180 mm/min (3 mm/s) | 100% | 1 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 12W | 5 mm material | Basswood | cut | 200 mm/min (3.33 mm/s) | 100% | 1 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 12W | 5 mm material | Rosewood Plywood | cut | 150 mm/min (2.5 mm/s) | 100% | 1 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 12W | 5 mm material | Walnut Plywood | cut | 150 mm/min (2.5 mm/s) | 100% | 1 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 22W | 5 mm material | Basswood | cut | 400 mm/min (6.67 mm/s) | 100% | 1 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 22W | 5 mm material | Rosewood Plywood | cut | 350 mm/min (5.83 mm/s) | 100% | 1 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 22W | 5 mm material | Walnut Plywood | cut | 350 mm/min (5.83 mm/s) | 100% | 1 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 40W (Normal mode) | 5 mm material | Bamboo | cut | 800 mm/min (13.33 mm/s) | 100% | 1 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 40W (Normal mode) | 5 mm material | Basswood | cut | 700 mm/min (11.67 mm/s) | 100% | 1 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 40W (Normal mode) | 5 mm material | Rosewood Plywood | cut | 600 mm/min (10 mm/s) | 100% | 1 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 40W (Normal mode) | 5 mm material | Walnut Plywood | cut | 600 mm/min (10 mm/s) | 100% | 1 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Monport 40W CO2 Laser Engraver | 5 mm material | Acrylic | cut | 4 mm/s (4 mm/s) | 45% | Not specified by Monport |
| Monport, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Monport 40W CO2 Laser Engraver | 5 mm material | Plywood | cut | 4 mm/s (4 mm/s) | 45% | Not specified by Monport |
| Monport, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| LU2-10A (10W) | 5 mm material | Pine | cut | 250 mm/min (4.17 mm/s) | 100% | 1 |
| Ortur, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| LU2-10A (10W) | 5 mm material | Plywood | cut | 300 mm/min (5 mm/s) | 100% | 1 |
| Ortur, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| LU3-20A/B (20W) | 5 mm material | Pine | cut | 350 mm/min (5.83 mm/s) | 100% | 1 |
| Ortur, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| LU3-20A/B (20W) | 5 mm material | Plywood | cut | 350 mm/min (5.83 mm/s) | 100% | 1 |
| Ortur, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| LU3-40A (40W) | 5 mm material | Pine | cut | 500 mm/min (8.33 mm/s) | 100% | 1 |
| Ortur, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| LU3-40A (40W) | 5 mm material | Plywood | cut | 700 mm/min (11.67 mm/s) | 100% | 1 |
| Ortur, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 12W | 6 mm material | White Tile Painted Black | engrave | 4000 mm/min (66.67 mm/s) | 85% | 1 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 22W | 6 mm material | White Tile Painted Black | engrave | 4000 mm/min (66.67 mm/s) | 50% | 1 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 40W (Normal mode) | 6 mm material | White Tile Painted Black | engrave | 4000 mm/min (66.67 mm/s) | 28% | 1 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| D1 Pro 10W | 6 mm material | Basswood plywood | cut | 2 mm/s (2 mm/s) | 100% | 4 |
| xTool, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| D1 Pro 10W | 6 mm material | Walnut Plywood | cut | 60 mm/s (60 mm/s) | 80% | 1 |
| xTool, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| D1 Pro 20W | 6 mm material | Basswood plywood | cut | 6 mm/s (6 mm/s) | 100% | 3 |
| xTool, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| D1 Pro 20W | 6 mm material | Birch Plywood | cut | 4 mm/s (4 mm/s) | 100% | 3 |
| xTool, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| D1 Pro 20W | 6 mm material | Walnut Plywood | cut | 60 mm/s (60 mm/s) | 80% | 1 |
| xTool, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| xTool S1 20W blue module | 6 mm material | Basswood | cut | 4 mm/s (4 mm/s) | 100% | 1 |
| xTool, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| xTool S1 40W blue module | 6 mm material | Basswood | cut | 10 mm/s (10 mm/s) | 100% | 1 |
| xTool, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| xTool S1 40W blue module | 6 mm material | Black acrylic | cut | 2 mm/s (2 mm/s) | 100% | 1 |
| xTool, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 12W | 7.6 mm material | Black Acrylic | cut | 250 mm/min (4.17 mm/s) | 100% | 3 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 22W | 7.6 mm material | Black Acrylic | cut | 120 mm/min (2 mm/s) | 100% | 2 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 40W (Normal mode) | 7.6 mm material | Black Acrylic | cut | 120 mm/min (2 mm/s) | 100% | 2 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 12W | 8 mm material | Basswood | cut | 250 mm/min (4.17 mm/s) | 100% | 2 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 22W | 8 mm material | Basswood | cut | 240 mm/min (4 mm/s) | 100% | 1 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 40W (Normal mode) | 8 mm material | Basswood | cut | 400 mm/min (6.67 mm/s) | 100% | 1 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| LU2-10A (10W) | 8 mm material | Pine | cut | 100 mm/min (1.67 mm/s) | 100% | 1 |
| Ortur, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| LU2-10A (10W) | 8 mm material | Plywood | cut | 100 mm/min (1.67 mm/s) | 100% | 1 |
| Ortur, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| LU3-20A/B (20W) | 8 mm material | Pine | cut | 200 mm/min (3.33 mm/s) | 100% | 1 |
| Ortur, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| LU3-20A/B (20W) | 8 mm material | Plywood | cut | 200 mm/min (3.33 mm/s) | 100% | 1 |
| Ortur, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| LU3-40A (40W) | 8 mm material | Pine | cut | 300 mm/min (5 mm/s) | 100% | 1 |
| Ortur, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| LU3-40A (40W) | 8 mm material | Plywood | cut | 400 mm/min (6.67 mm/s) | 100% | 1 |
| Ortur, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| D1 Pro 40W | 8 mm material | Basswood plywood | cut | 6 mm/s (6 mm/s) | 100% | 1 |
| xTool, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 12W | 10 mm material | Basswood | cut | 180 mm/min (3 mm/s) | 100% | 3 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 22W | 10 mm material | Basswood | cut | 120 mm/min (2 mm/s) | 100% | 1 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 40W (Normal mode) | 10 mm material | Basswood | cut | 300 mm/min (5 mm/s) | 100% | 1 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| LU2-10A (10W) | 10 mm material | Pine | cut | 100 mm/min (1.67 mm/s) | 100% | 2 |
| Ortur, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| LU2-10A (10W) | 10 mm material | Plywood | cut | 100 mm/min (1.67 mm/s) | 100% | 8 |
| Ortur, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| LU3-20A/B (20W) | 10 mm material | Pine | cut | 150 mm/min (2.5 mm/s) | 100% | 1 |
| Ortur, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| LU3-20A/B (20W) | 10 mm material | Plywood | cut | 250 mm/min (4.17 mm/s) | 100% | 2 |
| Ortur, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| LU3-40A (40W) | 10 mm material | Pine | cut | 250 mm/min (4.17 mm/s) | 100% | 1 |
| Ortur, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| LU3-40A (40W) | 10 mm material | Plywood | cut | 250 mm/min (4.17 mm/s) | 100% | 1 |
| Ortur, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| xTool S1 20W blue module | 10 mm material | Basswood | cut | 3 mm/s (3 mm/s) | 100% | 1 |
| xTool, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| xTool S1 40W blue module | 10 mm material | Basswood | cut | 6 mm/s (6 mm/s) | 100% | 1 |
| xTool, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| LU2-10A (10W) | 12 mm material | Pine | cut | 100 mm/min (1.67 mm/s) | 100% | 3 |
| Ortur, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| LU3-20A/B (20W) | 12 mm material | Pine | cut | 100 mm/min (1.67 mm/s) | 100% | 1 |
| Ortur, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| LU3-40A (40W) | 12 mm material | Pine | cut | 180 mm/min (3 mm/s) | 100% | 1 |
| Ortur, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 40W (Normal mode) | 15 mm material | Basswood | cut | 150 mm/min (2.5 mm/s) | 100% | 1 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| LU2-10A (10W) | 15 mm material | Pine | cut | 100 mm/min (1.67 mm/s) | 100% | 5 |
| Ortur, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| LU3-20A/B (20W) | 15 mm material | Pine | cut | 100 mm/min (1.67 mm/s) | 100% | 2 |
| Ortur, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| LU3-20A/B (20W) | 15 mm material | Plywood | cut | 200 mm/min (3.33 mm/s) | 100% | 2 |
| Ortur, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| LU3-40A (40W) | 15 mm material | Pine | cut | 150 mm/min (2.5 mm/s) | 100% | 1 |
| Ortur, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| LU3-40A (40W) | 15 mm material | Plywood | cut | 200 mm/min (3.33 mm/s) | 100% | 1 |
| Ortur, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| xTool S1 40W blue module | 15 mm material | Basswood | cut | 2 mm/s (2 mm/s) | 100% | 1 |
| xTool, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| LU2-10A (10W) | 19 mm material | Pine | cut | 100 mm/min (1.67 mm/s) | 100% | 8 |
| Ortur, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| LU3-20A/B (20W) | 19 mm material | Pine | cut | 100 mm/min (1.67 mm/s) | 100% | 3 |
| Ortur, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| LU3-40A (40W) | 19 mm material | Pine | cut | 120 mm/min (2 mm/s) | 100% | 1 |
| Ortur, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
These are each publisher's own parameters for its machine and material. CutChart has not run them. Confirm the exact material, focus, air assist and lens with the manufacturer before use.
Read the evidence in context
Our source process explains the checks behind a row. The speed converter changes units; it does not move a setting to another machine. Check power labels with the optical-watt decoder, and read the safety limits before choosing a material.
Common questions
Can I use a row on another machine?
Each row belongs to the stated machine and configuration. A matching wattage or material name does not establish a setting for another machine.
Why are some fields marked not specified?
The publisher’s table prints speed, power and thickness, and sometimes passes, but not air assist, focus or lens. CutChart shows each unprinted field as not specified rather than filling it in.
Why are some combinations absent?
CutChart publishes a row only when its source, exact machine, material, operation and a sourced material-safety statement meet the reference requirements. An absent row is an unknown answer.
Source documents
11 documents behind the rows and safety statements on this page. Open a document to read every excerpt as printed.
Creality Falcon: CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings (151 excerpts)
CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings
Publication date: 2023-12-23 · Read · Captured
Anodized Aluminum | 3 | 100 | 250 | 1
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Bamboo | 3 | 100 | 280 | 1
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Bamboo | 3 | 40 | 4000 | 1
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
10 | 100 | 180 | 3
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Cutting | Basswood | 2 | 100 | 400 | 1
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Engraving | Basswood | 2 | 40 | 4000 | 1
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
3 | 100 | 300 | 1
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
5 | 100 | 200 | 1
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
8 | 100 | 250 | 2
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Black Acrylic | 4.6 | 100 | 300 | 2
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
7.6 | 100 | 250 | 3
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Black Frosted Acrylic | 3 | 95 | 200 | 1
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Black Frosted Acrylic | 3 | 80 | 3000 | 1
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Black Opaque Glossy Acrylic | 3 | 80 | 4000 | 1
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Brown Leather | 0.65 | 100 | 2000 | 1
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Brown Leather | 0.65 | 20 | 4000 | 1
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Brushed Stainless Steel | 2 | 100 | 800 | 1
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Green Frosted Acrylic | 3 | 95 | 120 | 3
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Green Frosted Acrylic | 3 | 90 | 1200 | 1
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Green Opaque Glossy Acrylic | 3 | 95 | 120 | 3
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Green Opaque Glossy Acrylic | 3 | 50 | 4000 | 1
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Green Transparent Acrylic | 3 | 95 | 120 | 3
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Green Transparent Acrylic | 3 | 40 | 3000 | 1
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Kraft Paper | 0.15 | 15 | 4000 | 1
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Kraft Paper | 0.2 | 100 | 4000 | 1
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Orange Frosted Acrylic | 3 | 95 | 120 | 3
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Orange Frosted Acrylic | 3 | 90 | 1200 | 1
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Orange Opaque Glossy Acrylic | 3 | 95 | 120 | 2
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Orange Opaque Glossy Acrylic | 3 | 50 | 4000 | 1
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Purple Frosted Acrylic | 3 | 95 | 120 | 3
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Purple Frosted Acrylic | 3 | 90 | 1000 | 1
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Purple Opaque Glossy Acrylic | 3 | 95 | 120 | 2
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Purple Opaque Glossy Acrylic | 3 | 50 | 4000 | 1
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Red Card Paper | 0.2 | 100 | 4000 | 1
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Red Card Paper | 0.2 | 15 | 4000 | 1
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Red Felt | 0.8 | 100 | 3800 | 1
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Red Felt | 0.8 | 15 | 4000 | 1
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Red Opaque Glossy Acrylic | 3 | 95 | 120 | 1
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Red Opaque Glossy Acrylic | 3 | 50 | 4000 | 1
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Red Transparent Acrylic | 3 | 95 | 120 | 3
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Red Transparent Acrylic | 3 | 40 | 3000 | 1
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Rosewood Plywood | 3 | 100 | 280 | 1
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Rosewood Plywood | 3 | 35 | 4000 | 1
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
5 | 100 | 150 | 1
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Walnut Plywood | 3 | 100 | 280 | 1
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Walnut Plywood | 3 | 35 | 4000 | 1
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
5 | 100 | 150 | 1
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
White Tile Painted Black | 6 | 85 | 4000 | 1
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Yellow Transparent Acrylic | 3 | 95 | 120 | 2
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Yellow Transparent Acrylic | 3 | 40 | 3000 | 1
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Anodized Aluminum | 3 | 60 | 6000 | 1
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Bamboo | 3 | 100 | 450 | 1
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Bamboo | 3 | 40 | 6000 | 1
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
10 | 100 | 120 | 1
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Cutting | Basswood | 2 | 100 | 700 | 1
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Engraving | Basswood | 2 | 40 | 6000 | 1
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
3 | 100 | 550 | 1
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
5 | 100 | 400 | 1
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
8 | 100 | 240 | 1
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Black Acrylic | 4.6 | 100 | 120 | 1
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
7.6 | 100 | 120 | 2
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Black Frosted Acrylic | 3 | 55 | 180 | 1
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Black Frosted Acrylic | 3 | 40 | 3000 | 1
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Black Opaque Glossy Acrylic | 3 | 50 | 4000 | 1
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Brown Leather | 0.65 | 100 | 2000 | 1
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Brown Leather | 0.65 | 18 | 6000 | 1
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Brushed Stainless Steel | 2 | 80 | 6000 | 1
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Green Frosted Acrylic | 3 | 55 | 120 | 3
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Green Frosted Acrylic | 3 | 60 | 1200 | 1
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Green Opaque Glossy Acrylic | 3 | 55 | 120 | 3
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Green Opaque Glossy Acrylic | 3 | 50 | 6000 | 1
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Green Transparent Acrylic | 3 | 55 | 120 | 3
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Green Transparent Acrylic | 3 | 20 | 3000 | 1
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Kraft Paper | 0.15 | 18 | 6000 | 1
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Kraft Paper | 0.2 | 80 | 4000 | 1
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Orange Frosted Acrylic | 3 | 55 | 120 | 3
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Orange Frosted Acrylic | 3 | 60 | 1200 | 1
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Orange Opaque Glossy Acrylic | 3 | 55 | 120 | 2
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Orange Opaque Glossy Acrylic | 3 | 50 | 6000 | 1
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Purple Frosted Acrylic | 3 | 55 | 120 | 3
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Purple Frosted Acrylic | 3 | 60 | 1000 | 1
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Purple Opaque Glossy Acrylic | 3 | 55 | 120 | 2
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Purple Opaque Glossy Acrylic | 3 | 50 | 6000 | 1
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Red Card Paper | 0.2 | 50 | 4000 | 1
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Red Card Paper | 0.2 | 15 | 6000 | 1
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Red Felt | 0.8 | 55 | 4000 | 1
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Red Felt | 0.8 | 13 | 6000 | 1
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Red Opaque Glossy Acrylic | 3 | 55 | 120 | 1
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Red Opaque Glossy Acrylic | 3 | 50 | 6000 | 1
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Red Transparent Acrylic | 3 | 55 | 120 | 3
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Red Transparent Acrylic | 3 | 20 | 3000 | 1
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Rosewood Plywood | 3 | 100 | 450 | 1
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Rosewood Plywood | 3 | 35 | 6000 | 1
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
5 | 100 | 350 | 1
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Walnut Plywood | 3 | 100 | 450 | 1
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Walnut Plywood | 3 | 35 | 6000 | 1
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
5 | 100 | 350 | 1
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
White Tile Painted Black | 6 | 50 | 4000 | 1
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Yellow Transparent Acrylic | 3 | 55 | 120 | 2
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Yellow Transparent Acrylic | 3 | 20 | 3000 | 1
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Anodized Aluminum | 3 | 30 | 6000 | 1
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Bamboo | 3 | 25 | 6000 | 1
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Bamboo | 5 | 100 | 800 | 1
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
10 | 100 | 300 | 1
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
15 | 100 | 150 | 1
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Cutting | Basswood | 2 | 100 | 1000 | 1
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Engraving | Basswood | 2 | 25 | 6000 | 1
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
3 | 100 | 850 | 1
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
5 | 100 | 700 | 1
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
8 | 100 | 400 | 1
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Black Acrylic | 4.6 | 100 | 180 | 1
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
7.6 | 100 | 120 | 2
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Black Frosted Acrylic | 3 | 30 | 180 | 1
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Black Frosted Acrylic | 3 | 22 | 3000 | 1
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Black Opaque Glossy Acrylic | 3 | 26 | 4000 | 1
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Brown Leather | 0.65 | 70 | 4000 | 1
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Brown Leather | 0.65 | 12 | 6000 | 1
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Brushed Stainless Steel | 2 | 40 | 6000 | 1
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Green Frosted Acrylic | 3 | 30 | 120 | 3
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Green Frosted Acrylic | 3 | 30 | 1200 | 1
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Green Opaque Glossy Acrylic | 3 | 30 | 120 | 3
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Green Opaque Glossy Acrylic | 3 | 26 | 6000 | 1
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Green Transparent Acrylic | 3 | 30 | 120 | 3
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Green Transparent Acrylic | 3 | 12 | 3000 | 1
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Kraft Paper | 0.15 | 12 | 6000 | 1
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Kraft Paper | 0.2 | 40 | 4000 | 1
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Orange Frosted Acrylic | 3 | 30 | 120 | 3
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Orange Frosted Acrylic | 3 | 30 | 1200 | 1
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Orange Opaque Glossy Acrylic | 3 | 30 | 120 | 2
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Orange Opaque Glossy Acrylic | 3 | 26 | 6000 | 1
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Purple Frosted Acrylic | 3 | 30 | 120 | 3
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Purple Frosted Acrylic | 3 | 30 | 1000 | 1
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Purple Opaque Glossy Acrylic | 3 | 30 | 120 | 2
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Purple Opaque Glossy Acrylic | 3 | 26 | 6000 | 1
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Red Card Paper | 0.2 | 30 | 4000 | 1
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Red Card Paper | 0.2 | 8 | 6000 | 1
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Red Felt | 0.8 | 35 | 4000 | 1
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Red Felt | 0.8 | 7 | 6000 | 1
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Red Opaque Glossy Acrylic | 3 | 30 | 120 | 1
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Red Opaque Glossy Acrylic | 3 | 26 | 6000 | 1
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Red Transparent Acrylic | 3 | 30 | 120 | 3
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Red Transparent Acrylic | 3 | 12 | 3000 | 1
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Rosewood Plywood | 3 | 100 | 750 | 1
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Rosewood Plywood | 3 | 20 | 6000 | 1
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
5 | 100 | 600 | 1
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Walnut Plywood | 3 | 100 | 750 | 1
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Walnut Plywood | 3 | 20 | 6000 | 1
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
5 | 100 | 600 | 1
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
White Tile Painted Black | 6 | 28 | 4000 | 1
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Yellow Transparent Acrylic | 3 | 30 | 120 | 2
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Yellow Transparent Acrylic | 3 | 12 | 3000 | 1
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Epilog Laser: Reducing Fire Hazards with your Laser (4 excerpts)
Reducing Fire Hazards with your Laser
Publication date not printed by Epilog Laser · Read · Captured
Many materials are susceptible to igniting; however, acrylic (in all its forms), has shown to be especially flammable when vector cutting with the laser.
Epilog Laser, Reducing Fire Hazards with your Laser, Introduction. Publication date not printed by Epilog Laser · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Utilizing the Air Assist feature will reduce the instance of flare-ups when working with flammable materials such as acrylic and wood.
Epilog Laser, Reducing Fire Hazards with your Laser, Warnings and Recommendations. Publication date not printed by Epilog Laser · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Since most users cut wood and acrylic, these small pieces that fall into the table tray act just like kindling and can ignite and start a fire.
Epilog Laser, Reducing Fire Hazards with your Laser, Warnings and Recommendations. Publication date not printed by Epilog Laser · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Never operate the laser system unattended.
Epilog Laser, Reducing Fire Hazards with your Laser, Warnings and Recommendations. Publication date not printed by Epilog Laser · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Epilog Laser: Material Safety and your Laser (1 excerpt)
Material Safety and your Laser
Publication date not printed by Epilog Laser · Read · Captured
To protect your health and the life of your machine, always obtain a MSDS for materials about which you are uncertain.
Epilog Laser, Material Safety and your Laser, What happens if you engrave or cut something containing hydrogen or vinyl chloride?. Publication date not printed by Epilog Laser · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Creality: Creality Falcon2 (12W/22W/40W) User Manual (5 excerpts)
Creality Falcon2 (12W/22W/40W) User Manual
Publication date not printed by Creality · Read · Captured
13. Prepare fire extinguishers as a backup. Regularly maintain and inspect the fire extinguishers.
Creality, Creality Falcon2 (12W/22W/40W) User Manual, Security Statement. Publication date not printed by Creality · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
When a laser engraver engraves or cuts materials, it casts a high-density laser beam that heats the surface to vaporize materials without burning them. But most materials are inherently flammable and can be ignited, which may burn the machine and the surroundings.
Creality, Creality Falcon2 (12W/22W/40W) User Manual, Security Statement. Publication date not printed by Creality · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Cardboard, wood, bamboo, rubber, leather, fabric, acrylic, plastic, etc.
Creality, Creality Falcon2 (12W/22W/40W) User Manual, Parameters. Publication date not printed by Creality · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
14. It is forbidden to leave it unattended while the machine is working.
Creality, Creality Falcon2 (12W/22W/40W) User Manual, Security Statement. Publication date not printed by Creality · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
11. Smoke or smells may be produced during laser engraving and cutting. It is recommended to operate in a well-ventilated environment.
Creality, Creality Falcon2 (12W/22W/40W) User Manual, Security Statement. Publication date not printed by Creality · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Monport: Monport 40W CO2 Laser Engraver Recommended Parameters (13 excerpts)
Monport 40W CO2 Laser Engraver Recommended Parameters
Publication date not printed by Monport · Read · Captured
Cutting Thickness of Acrylic Material Thickness 1mm 2mm 3mm 4mm 5mm Speed(mm/s) 13 11 9 7 4 Power % 20 23 25 35 45
Monport, Monport 40W CO2 Laser Engraver Recommended Parameters, Cutting Thickness of Acrylic. Publication date not printed by Monport · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Cutting Thickness of Acrylic Material Thickness 1mm 2mm 3mm 4mm 5mm Speed(mm/s) 13 11 9 7 4 Power % 20 23 25 35 45
Monport, Monport 40W CO2 Laser Engraver Recommended Parameters, Cutting Thickness of Acrylic. Publication date not printed by Monport · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Cutting Thickness of Acrylic Material Thickness 1mm 2mm 3mm 4mm 5mm Speed(mm/s) 13 11 9 7 4 Power % 20 23 25 35 45
Monport, Monport 40W CO2 Laser Engraver Recommended Parameters, Cutting Thickness of Acrylic. Publication date not printed by Monport · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Cutting Thickness of Acrylic Material Thickness 1mm 2mm 3mm 4mm 5mm Speed(mm/s) 13 11 9 7 4 Power % 20 23 25 35 45
Monport, Monport 40W CO2 Laser Engraver Recommended Parameters, Cutting Thickness of Acrylic. Publication date not printed by Monport · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Cutting Thickness of Acrylic Material Thickness 1mm 2mm 3mm 4mm 5mm Speed(mm/s) 13 11 9 7 4 Power % 20 23 25 35 45
Monport, Monport 40W CO2 Laser Engraver Recommended Parameters, Cutting Thickness of Acrylic. Publication date not printed by Monport · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Cutting Thickness of Leather Material Thickness 1mm 2mm 3mm Speed(mm/s) 25 20 15 Power % 20 22 25
Monport, Monport 40W CO2 Laser Engraver Recommended Parameters, Cutting Thickness of Leather. Publication date not printed by Monport · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Cutting Thickness of Leather Material Thickness 1mm 2mm 3mm Speed(mm/s) 25 20 15 Power % 20 22 25
Monport, Monport 40W CO2 Laser Engraver Recommended Parameters, Cutting Thickness of Leather. Publication date not printed by Monport · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Cutting Thickness of Leather Material Thickness 1mm 2mm 3mm Speed(mm/s) 25 20 15 Power % 20 22 25
Monport, Monport 40W CO2 Laser Engraver Recommended Parameters, Cutting Thickness of Leather. Publication date not printed by Monport · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Cutting Thickness of Plywood Material Thickness 1mm 2mm 3mm 4mm 5mm Speed(mm/s) 17 15 13 7 4 Power % 20 23 25 35 45
Monport, Monport 40W CO2 Laser Engraver Recommended Parameters, Cutting Thickness of Plywood. Publication date not printed by Monport · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Cutting Thickness of Plywood Material Thickness 1mm 2mm 3mm 4mm 5mm Speed(mm/s) 17 15 13 7 4 Power % 20 23 25 35 45
Monport, Monport 40W CO2 Laser Engraver Recommended Parameters, Cutting Thickness of Plywood. Publication date not printed by Monport · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Cutting Thickness of Plywood Material Thickness 1mm 2mm 3mm 4mm 5mm Speed(mm/s) 17 15 13 7 4 Power % 20 23 25 35 45
Monport, Monport 40W CO2 Laser Engraver Recommended Parameters, Cutting Thickness of Plywood. Publication date not printed by Monport · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Cutting Thickness of Plywood Material Thickness 1mm 2mm 3mm 4mm 5mm Speed(mm/s) 17 15 13 7 4 Power % 20 23 25 35 45
Monport, Monport 40W CO2 Laser Engraver Recommended Parameters, Cutting Thickness of Plywood. Publication date not printed by Monport · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Cutting Thickness of Plywood Material Thickness 1mm 2mm 3mm 4mm 5mm Speed(mm/s) 17 15 13 7 4 Power % 20 23 25 35 45
Monport, Monport 40W CO2 Laser Engraver Recommended Parameters, Cutting Thickness of Plywood. Publication date not printed by Monport · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Monport: Model ONYX-R (6 excerpts)
Publication date not printed by Monport · Read · Captured
Attachment 1 Material Acrylic Basswood Canvas Cardboard Leather MDF Power (W) 50% 50% 25% 45% 30% 40% Engraving Speed 500 500 500 500 500 500 (mm/s) 100% 100% 100% 100% 100% 100% Power (W) 90% 90% 60% 90% 90% 90% Cutting Speed 35 65 350 200 80 30 (mm/s) 7% 13% 70% 40% 16% 6% Rec. Thickness (mm) 3 3 0.2 2 1.5 3 Resolution (dpi) 400 400 300 400 400 300
Monport, Model ONYX-R, Attachment 1. Publication date not printed by Monport · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Attachment 1 Material Acrylic Basswood Canvas Cardboard Leather MDF Power (W) 50% 50% 25% 45% 30% 40% Engraving Speed 500 500 500 500 500 500 (mm/s) 100% 100% 100% 100% 100% 100% Power (W) 90% 90% 60% 90% 90% 90% Cutting Speed 35 65 350 200 80 30 (mm/s) 7% 13% 70% 40% 16% 6% Rec. Thickness (mm) 3 3 0.2 2 1.5 3 Resolution (dpi) 400 400 300 400 400 300
Monport, Model ONYX-R, Attachment 1. Publication date not printed by Monport · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Attachment 1 Material Acrylic Basswood Canvas Cardboard Leather MDF Power (W) 50% 50% 25% 45% 30% 40% Engraving Speed 500 500 500 500 500 500 (mm/s) 100% 100% 100% 100% 100% 100% Power (W) 90% 90% 60% 90% 90% 90% Cutting Speed 35 65 350 200 80 30 (mm/s) 7% 13% 70% 40% 16% 6% Rec. Thickness (mm) 3 3 0.2 2 1.5 3 Resolution (dpi) 400 400 300 400 400 300
Monport, Model ONYX-R, Attachment 1. Publication date not printed by Monport · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Attachment 1 Material Acrylic Basswood Canvas Cardboard Leather MDF Power (W) 50% 50% 25% 45% 30% 40% Engraving Speed 500 500 500 500 500 500 (mm/s) 100% 100% 100% 100% 100% 100% Power (W) 90% 90% 60% 90% 90% 90% Cutting Speed 35 65 350 200 80 30 (mm/s) 7% 13% 70% 40% 16% 6% Rec. Thickness (mm) 3 3 0.2 2 1.5 3 Resolution (dpi) 400 400 300 400 400 300
Monport, Model ONYX-R, Attachment 1. Publication date not printed by Monport · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Attachment 1 Material Acrylic Basswood Canvas Cardboard Leather MDF Power (W) 50% 50% 25% 45% 30% 40% Engraving Speed 500 500 500 500 500 500 (mm/s) 100% 100% 100% 100% 100% 100% Power (W) 90% 90% 60% 90% 90% 90% Cutting Speed 35 65 350 200 80 30 (mm/s) 7% 13% 70% 40% 16% 6% Rec. Thickness (mm) 3 3 0.2 2 1.5 3 Resolution (dpi) 400 400 300 400 400 300
Monport, Model ONYX-R, Attachment 1. Publication date not printed by Monport · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Attachment 1 Material Acrylic Basswood Canvas Cardboard Leather MDF Power (W) 50% 50% 25% 45% 30% 40% Engraving Speed 500 500 500 500 500 500 (mm/s) 100% 100% 100% 100% 100% 100% Power (W) 90% 90% 60% 90% 90% 90% Cutting Speed 35 65 350 200 80 30 (mm/s) 7% 13% 70% 40% 16% 6% Rec. Thickness (mm) 3 3 0.2 2 1.5 3 Resolution (dpi) 400 400 300 400 400 300
Monport, Model ONYX-R, Attachment 1. Publication date not printed by Monport · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
OMTech: POLAR 350 | 50W | CO2 Desktop Laser Engraver (6 excerpts)
POLAR 350 | 50W | CO2 Desktop Laser Engraver
Publication date not printed by OMTech · Read · Captured
Acrylic 25 50% 500 100% 45 90% 35 7% 3 400
OMTech, POLAR 350 | 50W | CO2 Desktop Laser Engraver, Average Engraving Settings. Publication date not printed by OMTech · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Acrylic 25 50% 500 100% 45 90% 35 7% 3 400
OMTech, POLAR 350 | 50W | CO2 Desktop Laser Engraver, Average Engraving Settings. Publication date not printed by OMTech · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Basswood 25 50% 500 100% 45 90% 65 13% 3 400
OMTech, POLAR 350 | 50W | CO2 Desktop Laser Engraver, Average Engraving Settings. Publication date not printed by OMTech · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Basswood 25 50% 500 100% 45 90% 65 13% 3 400
OMTech, POLAR 350 | 50W | CO2 Desktop Laser Engraver, Average Engraving Settings. Publication date not printed by OMTech · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Leather 15 30% 500 100% 45 90% 80 16% 1.5 400
OMTech, POLAR 350 | 50W | CO2 Desktop Laser Engraver, Average Engraving Settings. Publication date not printed by OMTech · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Leather 15 30% 500 100% 45 90% 80 16% 1.5 400
OMTech, POLAR 350 | 50W | CO2 Desktop Laser Engraver, Average Engraving Settings. Publication date not printed by OMTech · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Ortur: Ortur LightBurn Material Settings (38 excerpts)
Ortur LightBurn Material Settings
Publication date not printed by Ortur · Read · Captured
Image Mode: Line Speed(mm/m): 100mm Power Min(%): 100 Perform Multiple Passes: 2
Ortur, Ortur LightBurn Material Settings, LightBurn Settings for Cutting. Publication date not printed by Ortur · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Image Mode: Line Speed(mm/m): 100mm Power Min(%): 100 Perform Multiple Passes: 3
Ortur, Ortur LightBurn Material Settings, LightBurn Settings for Cutting. Publication date not printed by Ortur · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Image Mode: Line Speed(mm/m): 100mm Power Min(%): 100 Perform Multiple Passes: 5
Ortur, Ortur LightBurn Material Settings, LightBurn Settings for Cutting. Publication date not printed by Ortur · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Image Mode: Line Speed(mm/m): 100mm Power Min(%): 100 Perform Multiple Passes: 8
Ortur, Ortur LightBurn Material Settings, LightBurn Settings for Cutting. Publication date not printed by Ortur · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Image Mode: Line Speed(mm/m): 300mm Power Min(%): 100 Perform Multiple Passes: 1
Ortur, Ortur LightBurn Material Settings, LightBurn Settings for Cutting. Publication date not printed by Ortur · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Image Mode: Line Speed(mm/m): 250mm Power Min(%): 100 Perform Multiple Passes: 1
Ortur, Ortur LightBurn Material Settings, LightBurn Settings for Cutting. Publication date not printed by Ortur · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Image Mode: Line Speed(mm/m): 100mm Power Min(%): 100 Perform Multiple Passes: 1
Ortur, Ortur LightBurn Material Settings, LightBurn Settings for Cutting. Publication date not printed by Ortur · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Image Mode: Line Speed(mm/m): 100mm Power Min(%): 100 Perform Multiple Passes: 8
Ortur, Ortur LightBurn Material Settings, LightBurn Settings for Cutting. Publication date not printed by Ortur · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Image Mode: Line Speed(mm/m): 500mm Power Min(%): 100 Perform Multiple Passes: 1
Ortur, Ortur LightBurn Material Settings, LightBurn Settings for Cutting. Publication date not printed by Ortur · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Image Mode: Line Speed(mm/m): 300mm Power Min(%): 100 Perform Multiple Passes: 1
Ortur, Ortur LightBurn Material Settings, LightBurn Settings for Cutting. Publication date not printed by Ortur · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Image Mode: Line Speed(mm/m): 300mm Power Min(%): 100 Perform Multiple Passes: 1
Ortur, Ortur LightBurn Material Settings, LightBurn Settings for Cutting. Publication date not printed by Ortur · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Image Mode: Line Speed(mm/m): 100mm Power Min(%): 100 Perform Multiple Passes: 1
Ortur, Ortur LightBurn Material Settings, LightBurn Settings for Cutting. Publication date not printed by Ortur · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Image Mode: Line Speed(mm/m): 150mm Power Min(%): 100 Perform Multiple Passes: 1
Ortur, Ortur LightBurn Material Settings, LightBurn Settings for Cutting. Publication date not printed by Ortur · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Image Mode: Line Speed(mm/m): 100mm Power Min(%): 100 Perform Multiple Passes: 1
Ortur, Ortur LightBurn Material Settings, LightBurn Settings for Cutting. Publication date not printed by Ortur · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Image Mode: Line Speed(mm/m): 100mm Power Min(%): 100 Perform Multiple Passes: 2
Ortur, Ortur LightBurn Material Settings, LightBurn Settings for Cutting. Publication date not printed by Ortur · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Image Mode: Line Speed(mm/m): 100mm Power Min(%): 100 Perform Multiple Passes: 3
Ortur, Ortur LightBurn Material Settings, LightBurn Settings for Cutting. Publication date not printed by Ortur · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Image Mode: Line Speed(mm/m): 500mm Power Min(%): 100 Perform Multiple Passes: 1
Ortur, Ortur LightBurn Material Settings, LightBurn Settings for Cutting. Publication date not printed by Ortur · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Image Mode: Line Speed(mm/m): 350mm Power Min(%): 100 Perform Multiple Passes: 1
Ortur, Ortur LightBurn Material Settings, LightBurn Settings for Cutting. Publication date not printed by Ortur · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Image Mode: Line Speed(mm/m): 200mm Power Min(%): 100 Perform Multiple Passes: 1
Ortur, Ortur LightBurn Material Settings, LightBurn Settings for Cutting. Publication date not printed by Ortur · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Image Mode: Line Speed(mm/m): 250mm Power Min(%): 100 Perform Multiple Passes: 2
Ortur, Ortur LightBurn Material Settings, LightBurn Settings for Cutting. Publication date not printed by Ortur · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Image Mode: Line Speed(mm/m): 200mm Power Min(%): 100 Perform Multiple Passes: 2
Ortur, Ortur LightBurn Material Settings, LightBurn Settings for Cutting. Publication date not printed by Ortur · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Image Mode: Line Speed(mm/m): 600mm Power Min(%): 100 Perform Multiple Passes: 1
Ortur, Ortur LightBurn Material Settings, LightBurn Settings for Cutting. Publication date not printed by Ortur · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Image Mode: Line Speed(mm/m): 500mm Power Min(%): 100 Perform Multiple Passes: 1
Ortur, Ortur LightBurn Material Settings, LightBurn Settings for Cutting. Publication date not printed by Ortur · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Image Mode: Line Speed(mm/m): 350mm Power Min(%): 100 Perform Multiple Passes: 1
Ortur, Ortur LightBurn Material Settings, LightBurn Settings for Cutting. Publication date not printed by Ortur · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Image Mode: Line Speed(mm/m): 200mm P ower Min(%): 100 Perform Multiple Passes: 1
Ortur, Ortur LightBurn Material Settings, LightBurn Settings for Cutting. Publication date not printed by Ortur · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Image Mode: Line Speed(mm/m): 250mm Power Min(%): 100 Perform Multiple Passes: 1
Ortur, Ortur LightBurn Material Settings, LightBurn Settings for Cutting. Publication date not printed by Ortur · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Image Mode: Line Speed(mm/m): 180mm Power Min(%): 100 Perform Multiple Passes: 1
Ortur, Ortur LightBurn Material Settings, LightBurn Settings for Cutting. Publication date not printed by Ortur · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Image Mode: Line Speed(mm/m): 150mm Power Min(%): 100 Perform Multiple Passes: 1
Ortur, Ortur LightBurn Material Settings, LightBurn Settings for Cutting. Publication date not printed by Ortur · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Image Mode: Line Speed(mm/m): 120mm Power Min(%): 100 Perform Multiple Passes: 1
Ortur, Ortur LightBurn Material Settings, LightBurn Settings for Cutting. Publication date not printed by Ortur · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Image Mode: Line Speed(mm/m): 700mm Power Min(%): 100 Perform Multiple Passes: 1
Ortur, Ortur LightBurn Material Settings, LightBurn Settings for Cutting. Publication date not printed by Ortur · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Image Mode: Line Speed(mm/m): 500mm Power Min(%): 100 Perform Multiple Passes: 1
Ortur, Ortur LightBurn Material Settings, LightBurn Settings for Cutting. Publication date not printed by Ortur · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Image Mode: Line Speed(mm/m): 300mm Power Min(%): 100 Perform Multiple Passes: 1
Ortur, Ortur LightBurn Material Settings, LightBurn Settings for Cutting. Publication date not printed by Ortur · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Image Mode: Line Speed(mm/m): 250mm Power Min(%): 100 Perform Multiple Passes: 1
Ortur, Ortur LightBurn Material Settings, LightBurn Settings for Cutting. Publication date not printed by Ortur · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Image Mode: Line Speed(mm/m): 200mm Power Min(%): 100 Perform Multiple Passes: 1
Ortur, Ortur LightBurn Material Settings, LightBurn Settings for Cutting. Publication date not printed by Ortur · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Image Mode: Line Speed(mm/m): 1600mm Power Min(%): 100 Perform Multiple Passes: 1
Ortur, Ortur LightBurn Material Settings, LightBurn Settings for Cutting. Publication date not printed by Ortur · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Image Mode: Line Speed(mm/m): 1100mm Power Min(%): 100 Perform Multiple Passes: 1
Ortur, Ortur LightBurn Material Settings, LightBurn Settings for Cutting. Publication date not printed by Ortur · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Image Mode: Line Speed(mm/m): 700mm Power Min(%): 100 Perform Multiple Passes: 1
Ortur, Ortur LightBurn Material Settings, LightBurn Settings for Cutting. Publication date not printed by Ortur · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Image Mode: Line Speed(mm/m): 400mm Power Min(%): 100 Perform Multiple Passes: 1
Ortur, Ortur LightBurn Material Settings, LightBurn Settings for Cutting. Publication date not printed by Ortur · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Trotec Laser: Which materials are not suitable for laser cutting and engraving? (2 excerpts)
Which materials are not suitable for laser cutting and engraving?
Publication date not printed by Trotec Laser · Read · Captured
Leather and artificial leather that contains chromium (VI)
Trotec Laser, Which materials are not suitable for laser cutting and engraving?, Materials you should not process with a laser. Publication date not printed by Trotec Laser · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
There are some materials that should not be processed with a laser engraver or a laser cutter because of their chemical make-up. Processing these materials creates dangerous gases or dust.
Trotec Laser, Which materials are not suitable for laser cutting and engraving?, Materials you should not process with a laser. Publication date not printed by Trotec Laser · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
xTool: Material Settings for xTool Machines (64 excerpts)
Material Settings for xTool Machines
Publication date not printed by xTool · Read · Captured
Basswood plywood | 3.0 | Cut | D1 Pro 10W | 100 / 3 / 2
xTool, Material Settings for xTool Machines, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Basswood plywood | 6.0 | Cut | D1 Pro 10W | 100 / 2 / 4
xTool, Material Settings for xTool Machines, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Birch Plywood | 3.0 | Cut | D1 Pro 10W | 100 / 3 / 1
xTool, Material Settings for xTool Machines, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Birch Plywood | 3.0 | Vector engrave | D1 Pro 10W | 50 / 30 / 1
xTool, Material Settings for xTool Machines, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Birch Plywood | 3.0 | Raster engrave | D1 Pro 10W | 80 / 100 / 1
xTool, Material Settings for xTool Machines, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Dark Red Acrylic Sheet（Opaque,Glossy) | 3.0 | Cut | D1 Pro 10W | 100 / 3 / 4
xTool, Material Settings for xTool Machines, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Dark Red Acrylic Sheet（Opaque,Glossy) | 3.0 | Vector engrave | D1 Pro 10W | 40 / 40 / 1
xTool, Material Settings for xTool Machines, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Dark Red Acrylic Sheet（Opaque,Glossy) | 3.0 | Raster engrave | D1 Pro 10W | 80 / 50 / 1
xTool, Material Settings for xTool Machines, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Fraxinus Mandshurica Plywood | 3.0 | Cut | D1 Pro 10W | 100 / 3 / 3
xTool, Material Settings for xTool Machines, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Mahogany Plywood | 3.0 | Cut | D1 Pro 10W | 100 / 4 / 3
xTool, Material Settings for xTool Machines, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Pine Plywood | 3.0 | Cut | D1 Pro 10W | 100 / 4 / 2
xTool, Material Settings for xTool Machines, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Red Acrylic Sheet (Transparent, Glossy) | 3.0 | Cut | D1 Pro 10W | 100 / 3 / 4
xTool, Material Settings for xTool Machines, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Red Acrylic Sheet (Transparent, Glossy) | 3.0 | Vector engrave | D1 Pro 10W | 40 / 50 / 1
xTool, Material Settings for xTool Machines, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Red Acrylic Sheet (Transparent, Glossy) | 3.0 | Raster engrave | D1 Pro 10W | 60 / 50 / 1
xTool, Material Settings for xTool Machines, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Walnut Plywood | 3.0 | Cut | D1 Pro 10W | 100 / 3 / 1
xTool, Material Settings for xTool Machines, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Walnut Plywood | 3.0 | Vector engrave | D1 Pro 10W | 50 / 30 / 1
xTool, Material Settings for xTool Machines, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Walnut Plywood | 3.0 | Raster engrave | D1 Pro 10W | 80 / 100 / 1
xTool, Material Settings for xTool Machines, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Walnut Plywood | 6.0 | Cut | D1 Pro 10W | 80 / 60 / 1
xTool, Material Settings for xTool Machines, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
White oak plywood | 3.0 | Cut | D1 Pro 10W | 100 / 3 / 2
xTool, Material Settings for xTool Machines, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Basswood plywood | 3.0 | Cut | D1 Pro 20W | 100 / 6 / 1
xTool, Material Settings for xTool Machines, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Basswood plywood | 3.0 | Vector engrave | D1 Pro 20W | 80 / 60 / 1
xTool, Material Settings for xTool Machines, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Basswood plywood | 3.0 | Raster engrave | D1 Pro 20W | 60 / 100 / 1
xTool, Material Settings for xTool Machines, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Basswood plywood | 6.0 | Cut | D1 Pro 20W | 100 / 6 / 3
xTool, Material Settings for xTool Machines, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Birch Plywood | 3.0 | Cut | D1 Pro 20W | 100 / 6 / 1
xTool, Material Settings for xTool Machines, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Birch Plywood | 6.0 | Cut | D1 Pro 20W | 100 / 4 / 3
xTool, Material Settings for xTool Machines, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Brown Opaque Glossy Acrylic | 2.0 | Cut | D1 Pro 20W | 100 / 5 / 3
xTool, Material Settings for xTool Machines, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Brown Opaque Glossy Acrylic | 2.0 | Vector engrave | D1 Pro 20W | 50 / 40 / 1
xTool, Material Settings for xTool Machines, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Brown Opaque Glossy Acrylic | 2.0 | Raster engrave | D1 Pro 20W | 40 / 50 / 1
xTool, Material Settings for xTool Machines, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Dark Red Acrylic Sheet（Opaque,Glossy) | 3.0 | Cut | D1 Pro 20W | 100 / 3 / 3
xTool, Material Settings for xTool Machines, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Dark Red Acrylic Sheet（Opaque,Glossy) | 3.0 | Vector engrave | D1 Pro 20W | 30 / 40 / 1
xTool, Material Settings for xTool Machines, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Dark Red Acrylic Sheet（Opaque,Glossy) | 3.0 | Raster engrave | D1 Pro 20W | 40 / 50 / 1
xTool, Material Settings for xTool Machines, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Fraxinus Mandshurica Plywood | 3.0 | Cut | D1 Pro 20W | 100 / 4 / 1
xTool, Material Settings for xTool Machines, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Mahogany Plywood | 3.0 | Cut | D1 Pro 20W | 100 / 6 / 1
xTool, Material Settings for xTool Machines, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Pine Plywood | 3.0 | Cut | D1 Pro 20W | 100 / 5 / 1
xTool, Material Settings for xTool Machines, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Red Acrylic Sheet (Transparent, Glossy) | 3.0 | Cut | D1 Pro 20W | 100 / 3 / 3
xTool, Material Settings for xTool Machines, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Red Acrylic Sheet (Transparent, Glossy) | 3.0 | Vector engrave | D1 Pro 20W | 30 / 40 / 1
xTool, Material Settings for xTool Machines, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Red Acrylic Sheet (Transparent, Glossy) | 3.0 | Raster engrave | D1 Pro 20W | 60 / 100 / 1
xTool, Material Settings for xTool Machines, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Walnut Plywood | 3.0 | Cut | D1 Pro 20W | 100 / 4 / 1
xTool, Material Settings for xTool Machines, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Walnut Plywood | 6.0 | Cut | D1 Pro 20W | 80 / 60 / 1
xTool, Material Settings for xTool Machines, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
White oak plywood | 3.0 | Cut | D1 Pro 20W | 100 / 5 / 1
xTool, Material Settings for xTool Machines, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Basswood plywood | 3.0 | Cut | D1 Pro 40W | 100 / 13 / 1
xTool, Material Settings for xTool Machines, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Basswood plywood | 8.0 | Cut | D1 Pro 40W | 100 / 6 / 1
xTool, Material Settings for xTool Machines, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Black Acrylic | 3.0 | Cut | D1 Pro 40W | 100 / 5 / 1
xTool, Material Settings for xTool Machines, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Blood Red Acrylic | 3.0 | Cut | D1 Pro 40W | 100 / 5 / 1
xTool, Material Settings for xTool Machines, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Cherry Plywood | 3.0 | Cut | D1 Pro 40W | 100 / 12 / 1
xTool, Material Settings for xTool Machines, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Fraxinus Mandshurica Plywood | 3.0 | Cut | D1 Pro 40W | 100 / 12 / 1
xTool, Material Settings for xTool Machines, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Kraft Paper | 0.23mm | Cut | D1 Pro 40W | 60 / 60 / 1
xTool, Material Settings for xTool Machines, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Pine Plywood | 3.0 | Cut | D1 Pro 40W | 100 / 12 / 1
xTool, Material Settings for xTool Machines, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Walnut Plywood | 3.0 | Cut | D1 Pro 40W | 100 / 12 / 1
xTool, Material Settings for xTool Machines, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Basswood plywood | 3.0 | Cut | D1 Pro 5W | 100 / 2 / 2
xTool, Material Settings for xTool Machines, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Cherry Plywood | 3.0 | Cut | D1 Pro 5W | 100 / 2 / 2
xTool, Material Settings for xTool Machines, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Dark Red Acrylic Sheet（Opaque,Glossy) | 3.0 | Cut | D1 Pro 5W | 100 / 1 / 3
xTool, Material Settings for xTool Machines, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Dark Red Acrylic Sheet（Opaque,Glossy) | 3.0 | Raster engrave | D1 Pro 5W | 100 / 50 / 1
xTool, Material Settings for xTool Machines, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Walnut Plywood | 3.0 | Cut | D1 Pro 5W | 100 / 4 / 3
xTool, Material Settings for xTool Machines, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Basswood | 10.0 | Vector cut | 20 W blue-light laser | 100/ 3 / 1
xTool, Material Settings for xTool Machines, xTool S1. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Basswood | 3.0 | Vector cut | 20 W blue-light laser | 100 / 7 / 1
xTool, Material Settings for xTool Machines, xTool S1. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Basswood | 6.0 | Vector cut | 20 W blue-light laser | 100 / 4 / 1
xTool, Material Settings for xTool Machines, xTool S1. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Black acrylic | 3.0 | Vector cut | 20 W blue-light laser | 100 / 4 / 1
xTool, Material Settings for xTool Machines, xTool S1. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Basswood | 10.0 | Vector cut | 40 W blue-light laser | 100 / 6 / 1
xTool, Material Settings for xTool Machines, xTool S1. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Basswood | 15.0 | Vector cut | 40 W blue-light laser | 100 / 2 / 1
xTool, Material Settings for xTool Machines, xTool S1. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Basswood | 3.0 | Vector cut | 40 W blue-light laser | 100 / 15 / 1
xTool, Material Settings for xTool Machines, xTool S1. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Basswood | 6.0 | Vector cut | 40 W blue-light laser | 100 / 10 / 1
xTool, Material Settings for xTool Machines, xTool S1. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Black acrylic | 3.0 | Vector cut | 40 W blue-light laser | 100 / 8 / 1
xTool, Material Settings for xTool Machines, xTool S1. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Black acrylic | 6.0 | Vector cut | 40 W blue-light laser | 100 / 2 / 1
xTool, Material Settings for xTool Machines, xTool S1. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
xTool: S1 Safety First (Important) (4 excerpts)
Publication date not printed by xTool · Read · Captured
A high-density laser beam is used by the device to irradiate the material to be cut or engraved, so as to heat up the material surface and vaporize the material without burning. But most materials are inherently flammable and may be ignited to form an open flame that can burn down the device (even if it is made of flame-retardant materials) and its surroundings. Experience shows that vector cutting with a laser is most likely to produce an open flame. In particular, acrylic has proven to be extremely flammable in vector cutting.
xTool, S1 Safety First (Important), 3. Fire safety. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Do not stack materials (especially organic ones, such as paper) around the machine. They may cause the spread of flames and increase the risk of material ignition.
xTool, S1 Safety First (Important), 3. Fire safety. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Do not engrave or cut any unknown materials. Vaporization or melting of many materials, which include but are not limited to PVC and polycarbonate, may release harmful smoke.
xTool, S1 Safety First (Important), 2. Laser safety. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Ensure that the workspace is well-ventilated so that the generated smoke can be discharged in time.
xTool, S1 Safety First (Important), 3. Fire safety. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Reference information only. Follow the instructions for your exact machine and material. A listed setting does not establish that a job is safe. Read the safety limits.