CutChart / workshop reference
Can You Laser Cut Paper? Conditions Documented
5 quoted safety statements about paper, from xTool and Creality, last verified 2026-09-21. The cited publishers document operating conditions for this material, and CutChart shows them beside every settings row for it. Read the quotes in context before any job.
Quoted statements
- Fire:
Do not stack materials (especially organic ones, such as paper) around the machine. They may cause the spread of flames and increase the risk of material ignition.
(xTool, S1 Safety First (Important), read 2026-09-21) - Fire:
But most materials are inherently flammable and can be ignited, which may burn the machine and the surroundings.
(Creality, Creality Falcon2 (12W/22W/40W) User Manual, read 2026-09-21) - Ventilation:
Smoke or smells may be produced during laser engraving and cutting. It is recommended to operate in a well-ventilated environment.
(Creality, Creality Falcon2 (12W/22W/40W) User Manual, read 2026-09-21) - Fire:
It is forbidden to leave it unattended while the machine is working.
(Creality, Creality Falcon2 (12W/22W/40W) User Manual, read 2026-09-21) - Fire:
Prepare fire extinguishers as a backup. Regularly maintain and inspect the fire extinguishers.
(Creality, Creality Falcon2 (12W/22W/40W) User Manual, read 2026-09-21)
Reviewed 2026-09-21; expires 2026-12-20. These statements are quoted from the publishers named above and are not a complete safety procedure. The cited statements are not scoped to one laser family.
What CutChart publishes for this material
The settings reference for paper carries these statements beside every row. A row always names the machine it was printed for.
Common questions
Did CutChart test this material?
No. Every statement on this page is quoted from the publisher named beside it, with the document title and the date CutChart read it. CutChart has purchased no machine and run no test.
Why does a material have no settings table?
CutChart publishes a settings row only when a sourced material-safety record exists for the material. A material whose cited publisher says not to laser it gets a warning and no settings, whatever its laser family.
What does the review date mean?
Each record states the day CutChart last verified its quoted statements against the publisher document and the day that verification expires. Re-reading a source after its expiry window is a scheduled job, not a claim about the publisher.
Source documents
2 documents behind the rows and safety statements on this page. Open a document to read every excerpt as printed.
Creality: Creality Falcon2 (12W/22W/40W) User Manual (4 excerpts)
Creality Falcon2 (12W/22W/40W) User Manual
Publication date not printed by Creality · Read · Captured
13. Prepare fire extinguishers as a backup. Regularly maintain and inspect the fire extinguishers.
Creality, Creality Falcon2 (12W/22W/40W) User Manual, Security Statement. Publication date not printed by Creality · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
When a laser engraver engraves or cuts materials, it casts a high-density laser beam that heats the surface to vaporize materials without burning them. But most materials are inherently flammable and can be ignited, which may burn the machine and the surroundings.
Creality, Creality Falcon2 (12W/22W/40W) User Manual, Security Statement. Publication date not printed by Creality · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
14. It is forbidden to leave it unattended while the machine is working.
Creality, Creality Falcon2 (12W/22W/40W) User Manual, Security Statement. Publication date not printed by Creality · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
11. Smoke or smells may be produced during laser engraving and cutting. It is recommended to operate in a well-ventilated environment.
Creality, Creality Falcon2 (12W/22W/40W) User Manual, Security Statement. Publication date not printed by Creality · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
xTool: S1 Safety First (Important) (1 excerpt)
Publication date not printed by xTool · Read · Captured
Do not stack materials (especially organic ones, such as paper) around the machine. They may cause the spread of flames and increase the risk of material ignition.
xTool, S1 Safety First (Important), 3. Fire safety. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Reference information only. Follow the instructions for your exact machine and material. A listed setting does not establish that a job is safe. Read the safety limits.