CutChart.

Acrylic Laser Settings: Cut & Engrave Rows

Creality Falcon, Monport, OMTech and xTool document 106 speed and power settings for acrylic. CutChart has not tested them; it read the makers’ documents from 2026-09-21 to 2026-10-02.

safety ↓ · sources ↓

106 documented rows match these filters.

Source-documented settings for acrylic

About these numbers

Manufacturer-published reference parameters, not tested by CutChart

Speed: the figure the publisher printed, in bold, with the other unit converted under it. Type the number whose unit matches the speed box in your laser software. Not sure? Convert it here.

12 machines. Open one to see its settings.

CO2 machines

Monport 40W CO2 Laser Engraver · Acrylic

Monport 40W CO2 Laser Engraver, Acrylic: 5 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Monport 40W CO2 Laser Engraver1 mmAcryliccut13 mm/s = 780 mm/min20%Not specified by Monport
  • Air assist: Not specified by Monport
  • Focus: Not specified by Monport
  • Lens: Not specified by Monport
Monport, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Monport 40W CO2 Laser Engraver2 mmAcryliccut11 mm/s = 660 mm/min23%Not specified by Monport
  • Air assist: Not specified by Monport
  • Focus: Not specified by Monport
  • Lens: Not specified by Monport
Monport, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Monport 40W CO2 Laser Engraver3 mmAcryliccut9 mm/s = 540 mm/min25%Not specified by Monport
  • Air assist: Not specified by Monport
  • Focus: Not specified by Monport
  • Lens: Not specified by Monport
Monport, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Monport 40W CO2 Laser Engraver4 mmAcryliccut7 mm/s = 420 mm/min35%Not specified by Monport
  • Air assist: Not specified by Monport
  • Focus: Not specified by Monport
  • Lens: Not specified by Monport
Monport, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Monport 40W CO2 Laser Engraver5 mmAcryliccut4 mm/s = 240 mm/min45%Not specified by Monport
  • Air assist: Not specified by Monport
  • Focus: Not specified by Monport
  • Lens: Not specified by Monport
Monport, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

Every row: cut

Not specified by Monport for any row here: passes, air assist, focus and lens.

Source: Monport, read 2026-09-21; reviewed 2026-09-21. Document: Monport 40W CO2 Laser Engraver Recommended Parameters.

OMTech Polar 350 · Acrylic

OMTech Polar 350, Acrylic: 2 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
OMTech Polar 3503 mmAcryliccut35 mm/s = 2100 mm/min90%Not specified by OMTech
  • Air assist: Not specified by OMTech
  • Focus: Not specified by OMTech
  • Lens: Not specified by OMTech
OMTech, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
OMTech Polar 3503 mmAcrylicengrave500 mm/s = 30000 mm/min50%Not specified by OMTech
  • Air assist: Not specified by OMTech
  • Focus: Not specified by OMTech
  • Lens: Not specified by OMTech
  • Line interval: Not specified by OMTech
OMTech, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

Every row: 3 mm

Not specified by OMTech for any row here: passes, air assist, focus and lens; line interval on engrave rows.

Source: OMTech, read 2026-09-21; reviewed 2026-09-21. Document: POLAR 350 | 50W | CO2 Desktop Laser Engraver.

ONYX-R · Acrylic

ONYX-R, Acrylic: 2 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
ONYX-R3 mmAcryliccut35 mm/s = 2100 mm/min90%Not specified by Monport
  • Air assist: Not specified by Monport
  • Focus: Not specified by Monport
  • Lens: Not specified by Monport
Monport, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
ONYX-R3 mmAcrylicengrave500 mm/s = 30000 mm/min50%Not specified by Monport
  • Air assist: Not specified by Monport
  • Focus: Not specified by Monport
  • Lens: Not specified by Monport
  • Line interval: Not specified by Monport
Monport, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

These values are identical to the OMTech Polar 350 table above: both makers' documents print the same numbers.

Every row: 3 mm

Not specified by Monport for any row here: passes, air assist, focus and lens; line interval on engrave rows.

Source: Monport, read 2026-09-21; reviewed 2026-09-21. Document: Model ONYX-R.

Diode machines

D1 Pro 5W · Dunkelrote Acrylglasplatte (undurchsichtig, glänzend)

D1 Pro 5W, Dunkelrote Acrylglasplatte (undurchsichtig, glänzend): 2 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
D1 Pro 5W3 mmDunkelrote Acrylglasplatte (undurchsichtig, glänzend)cut1 mm/s = 60 mm/min100%3
  • Air assist: Not specified by xTool
  • Focus: Not specified by xTool
  • Lens: Not specified by xTool
xTool, read 2026-10-02. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
D1 Pro 5W3 mmDunkelrote Acrylglasplatte (undurchsichtig, glänzend)fill50 mm/s = 3000 mm/min100%1
  • Air assist: Not specified by xTool
  • Focus: Not specified by xTool
  • Lens: Not specified by xTool
  • Line interval: Not specified by xTool
xTool, read 2026-10-02. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

Every row: 3 mm

Not specified by xTool for any row here: air assist, focus and lens; line interval on fill rows.

Source: xTool, read 2026-10-02; reviewed 2026-09-21. Document: Materialeinstellungen für xTool Maschinen.

D1 Pro 10W · Dunkelrote Acrylglasplatte (undurchsichtig, glänzend)

D1 Pro 10W, Dunkelrote Acrylglasplatte (undurchsichtig, glänzend): 3 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
D1 Pro 10W3 mmDunkelrote Acrylglasplatte (undurchsichtig, glänzend)cut3 mm/s = 180 mm/min100%4
  • Air assist: Not specified by xTool
  • Focus: Not specified by xTool
  • Lens: Not specified by xTool
xTool, read 2026-10-02. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
D1 Pro 10W3 mmDunkelrote Acrylglasplatte (undurchsichtig, glänzend)engrave40 mm/s = 2400 mm/min40%1
  • Air assist: Not specified by xTool
  • Focus: Not specified by xTool
  • Lens: Not specified by xTool
  • Line interval: Not specified by xTool
xTool, read 2026-10-02. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
D1 Pro 10W3 mmDunkelrote Acrylglasplatte (undurchsichtig, glänzend)fill50 mm/s = 3000 mm/min80%1
  • Air assist: Not specified by xTool
  • Focus: Not specified by xTool
  • Lens: Not specified by xTool
  • Line interval: Not specified by xTool
xTool, read 2026-10-02. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

D1 Pro 10W · Rote Acrylglasplatte (transparent, glänzend)

D1 Pro 10W, Rote Acrylglasplatte (transparent, glänzend): 3 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
D1 Pro 10W3 mmRote Acrylglasplatte (transparent, glänzend)cut3 mm/s = 180 mm/min100%4
  • Air assist: Not specified by xTool
  • Focus: Not specified by xTool
  • Lens: Not specified by xTool
xTool, read 2026-10-02. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
D1 Pro 10W3 mmRote Acrylglasplatte (transparent, glänzend)engrave50 mm/s = 3000 mm/min40%1
  • Air assist: Not specified by xTool
  • Focus: Not specified by xTool
  • Lens: Not specified by xTool
  • Line interval: Not specified by xTool
xTool, read 2026-10-02. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
D1 Pro 10W3 mmRote Acrylglasplatte (transparent, glänzend)fill50 mm/s = 3000 mm/min60%1
  • Air assist: Not specified by xTool
  • Focus: Not specified by xTool
  • Lens: Not specified by xTool
  • Line interval: Not specified by xTool
xTool, read 2026-10-02. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

Every row: 3 mm

Not specified by xTool for any row here: air assist, focus and lens; line interval on fill and engrave rows.

Source: xTool, read 2026-10-02; reviewed 2026-09-21. Document: Materialeinstellungen für xTool Maschinen.

D1 Pro 20W · Braune Acrylglasplatte undurchsichtig glänzend

D1 Pro 20W, Braune Acrylglasplatte undurchsichtig glänzend: 3 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
D1 Pro 20W2 mmBraune Acrylglasplatte undurchsichtig glänzendcut5 mm/s = 300 mm/min100%3
  • Air assist: Not specified by xTool
  • Focus: Not specified by xTool
  • Lens: Not specified by xTool
xTool, read 2026-10-02. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
D1 Pro 20W2 mmBraune Acrylglasplatte undurchsichtig glänzendengrave40 mm/s = 2400 mm/min50%1
  • Air assist: Not specified by xTool
  • Focus: Not specified by xTool
  • Lens: Not specified by xTool
  • Line interval: Not specified by xTool
xTool, read 2026-10-02. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
D1 Pro 20W2 mmBraune Acrylglasplatte undurchsichtig glänzendfill50 mm/s = 3000 mm/min40%1
  • Air assist: Not specified by xTool
  • Focus: Not specified by xTool
  • Lens: Not specified by xTool
  • Line interval: Not specified by xTool
xTool, read 2026-10-02. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

D1 Pro 20W · Dunkelrote Acrylglasplatte (undurchsichtig, glänzend)

D1 Pro 20W, Dunkelrote Acrylglasplatte (undurchsichtig, glänzend): 3 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
D1 Pro 20W3 mmDunkelrote Acrylglasplatte (undurchsichtig, glänzend)cut3 mm/s = 180 mm/min100%3
  • Air assist: Not specified by xTool
  • Focus: Not specified by xTool
  • Lens: Not specified by xTool
xTool, read 2026-10-02. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
D1 Pro 20W3 mmDunkelrote Acrylglasplatte (undurchsichtig, glänzend)engrave40 mm/s = 2400 mm/min30%1
  • Air assist: Not specified by xTool
  • Focus: Not specified by xTool
  • Lens: Not specified by xTool
  • Line interval: Not specified by xTool
xTool, read 2026-10-02. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
D1 Pro 20W3 mmDunkelrote Acrylglasplatte (undurchsichtig, glänzend)fill50 mm/s = 3000 mm/min40%1
  • Air assist: Not specified by xTool
  • Focus: Not specified by xTool
  • Lens: Not specified by xTool
  • Line interval: Not specified by xTool
xTool, read 2026-10-02. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

D1 Pro 20W · Rote Acrylglasplatte (transparent, glänzend)

D1 Pro 20W, Rote Acrylglasplatte (transparent, glänzend): 3 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
D1 Pro 20W3 mmRote Acrylglasplatte (transparent, glänzend)cut3 mm/s = 180 mm/min100%3
  • Air assist: Not specified by xTool
  • Focus: Not specified by xTool
  • Lens: Not specified by xTool
xTool, read 2026-10-02. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
D1 Pro 20W3 mmRote Acrylglasplatte (transparent, glänzend)engrave40 mm/s = 2400 mm/min30%1
  • Air assist: Not specified by xTool
  • Focus: Not specified by xTool
  • Lens: Not specified by xTool
  • Line interval: Not specified by xTool
xTool, read 2026-10-02. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
D1 Pro 20W3 mmRote Acrylglasplatte (transparent, glänzend)fill100 mm/s = 6000 mm/min60%1
  • Air assist: Not specified by xTool
  • Focus: Not specified by xTool
  • Lens: Not specified by xTool
  • Line interval: Not specified by xTool
xTool, read 2026-10-02. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

Not specified by xTool for any row here: air assist, focus and lens; line interval on fill and engrave rows.

Source: xTool, read 2026-10-02; reviewed 2026-09-21. Document: Materialeinstellungen für xTool Maschinen.

D1 Pro 40W · Blutrotes Acrylglas

D1 Pro 40W, Blutrotes Acrylglas: 1 row, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
D1 Pro 40W3 mmBlutrotes Acrylglascut5 mm/s = 300 mm/min100%1
  • Air assist: Not specified by xTool
  • Focus: Not specified by xTool
  • Lens: Not specified by xTool
xTool, read 2026-10-02. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

D1 Pro 40W · Schwarzes Acrylglas

D1 Pro 40W, Schwarzes Acrylglas: 1 row, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
D1 Pro 40W3 mmSchwarzes Acrylglascut5 mm/s = 300 mm/min100%1
  • Air assist: Not specified by xTool
  • Focus: Not specified by xTool
  • Lens: Not specified by xTool
xTool, read 2026-10-02. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

These values are identical to D1 Pro 40W's Schwarzes Acrylglas table above: both makers' documents print the same numbers.

Every row: cut · 3 mm · 1 pass

Not specified by xTool for any row here: air assist, focus and lens.

Source: xTool, read 2026-10-02; reviewed 2026-09-21. Document: Materialeinstellungen für xTool Maschinen.

Falcon2 12W · Black Acrylic

Falcon2 12W, Black Acrylic: 2 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 12W4.6 mmBlack Acryliccut300 mm/min (5 mm/s)100%2
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 12W7.6 mmBlack Acryliccut250 mm/min (4.17 mm/s)100%3
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

Falcon2 12W · Black Frosted Acrylic

Falcon2 12W, Black Frosted Acrylic: 2 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 12W3 mmBlack Frosted Acryliccut200 mm/min (3.33 mm/s)95%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 12W3 mmBlack Frosted Acrylicengrave3000 mm/min (50 mm/s)80%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
  • Line interval: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

Falcon2 12W · Black Opaque Glossy Acrylic

Falcon2 12W, Black Opaque Glossy Acrylic: 1 row, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 12W3 mmBlack Opaque Glossy Acrylicengrave4000 mm/min (66.67 mm/s)80%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
  • Line interval: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

Falcon2 12W · Green Frosted Acrylic

Falcon2 12W, Green Frosted Acrylic: 2 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 12W3 mmGreen Frosted Acryliccut120 mm/min (2 mm/s)95%3
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 12W3 mmGreen Frosted Acrylicengrave1200 mm/min (20 mm/s)90%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
  • Line interval: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

Falcon2 12W · Green Opaque Glossy Acrylic

Falcon2 12W, Green Opaque Glossy Acrylic: 2 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 12W3 mmGreen Opaque Glossy Acryliccut120 mm/min (2 mm/s)95%3
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 12W3 mmGreen Opaque Glossy Acrylicengrave4000 mm/min (66.67 mm/s)50%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
  • Line interval: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

Falcon2 12W · Green Transparent Acrylic

Falcon2 12W, Green Transparent Acrylic: 2 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 12W3 mmGreen Transparent Acryliccut120 mm/min (2 mm/s)95%3
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 12W3 mmGreen Transparent Acrylicengrave3000 mm/min (50 mm/s)40%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
  • Line interval: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

Falcon2 12W · Orange Frosted Acrylic

Falcon2 12W, Orange Frosted Acrylic: 2 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 12W3 mmOrange Frosted Acryliccut120 mm/min (2 mm/s)95%3
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 12W3 mmOrange Frosted Acrylicengrave1200 mm/min (20 mm/s)90%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
  • Line interval: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

These values are identical to Falcon2 12W's Orange Frosted Acrylic table above: both makers' documents print the same numbers.

Falcon2 12W · Orange Opaque Glossy Acrylic

Falcon2 12W, Orange Opaque Glossy Acrylic: 2 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 12W3 mmOrange Opaque Glossy Acryliccut120 mm/min (2 mm/s)95%2
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 12W3 mmOrange Opaque Glossy Acrylicengrave4000 mm/min (66.67 mm/s)50%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
  • Line interval: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

Falcon2 12W · Purple Frosted Acrylic

Falcon2 12W, Purple Frosted Acrylic: 2 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 12W3 mmPurple Frosted Acryliccut120 mm/min (2 mm/s)95%3
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 12W3 mmPurple Frosted Acrylicengrave1000 mm/min (16.67 mm/s)90%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
  • Line interval: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

Falcon2 12W · Purple Opaque Glossy Acrylic

Falcon2 12W, Purple Opaque Glossy Acrylic: 2 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 12W3 mmPurple Opaque Glossy Acryliccut120 mm/min (2 mm/s)95%2
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 12W3 mmPurple Opaque Glossy Acrylicengrave4000 mm/min (66.67 mm/s)50%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
  • Line interval: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

These values are identical to Falcon2 12W's Purple Opaque Glossy Acrylic table above: both makers' documents print the same numbers.

Falcon2 12W · Red Opaque Glossy Acrylic

Falcon2 12W, Red Opaque Glossy Acrylic: 2 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 12W3 mmRed Opaque Glossy Acryliccut120 mm/min (2 mm/s)95%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 12W3 mmRed Opaque Glossy Acrylicengrave4000 mm/min (66.67 mm/s)50%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
  • Line interval: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

Falcon2 12W · Red Transparent Acrylic

Falcon2 12W, Red Transparent Acrylic: 2 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 12W3 mmRed Transparent Acryliccut120 mm/min (2 mm/s)95%3
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 12W3 mmRed Transparent Acrylicengrave3000 mm/min (50 mm/s)40%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
  • Line interval: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

These values are identical to Falcon2 12W's Red Transparent Acrylic table above: both makers' documents print the same numbers.

Falcon2 12W · Yellow Transparent Acrylic

Falcon2 12W, Yellow Transparent Acrylic: 2 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 12W3 mmYellow Transparent Acryliccut120 mm/min (2 mm/s)95%2
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 12W3 mmYellow Transparent Acrylicengrave3000 mm/min (50 mm/s)40%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
  • Line interval: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

Not specified by Creality Falcon for any row here: air assist, focus and lens; line interval on engrave rows.

Source: Creality Falcon, read 2026-09-21; reviewed 2026-09-21. Document: CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings.

Falcon2 22W · Black Acrylic

Falcon2 22W, Black Acrylic: 2 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 22W4.6 mmBlack Acryliccut120 mm/min (2 mm/s)100%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 22W7.6 mmBlack Acryliccut120 mm/min (2 mm/s)100%2
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

Falcon2 22W · Black Frosted Acrylic

Falcon2 22W, Black Frosted Acrylic: 2 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 22W3 mmBlack Frosted Acryliccut180 mm/min (3 mm/s)55%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 22W3 mmBlack Frosted Acrylicengrave3000 mm/min (50 mm/s)40%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
  • Line interval: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

Falcon2 22W · Black Opaque Glossy Acrylic

Falcon2 22W, Black Opaque Glossy Acrylic: 1 row, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 22W3 mmBlack Opaque Glossy Acrylicengrave4000 mm/min (66.67 mm/s)50%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
  • Line interval: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

Falcon2 22W · Green Frosted Acrylic

Falcon2 22W, Green Frosted Acrylic: 2 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 22W3 mmGreen Frosted Acryliccut120 mm/min (2 mm/s)55%3
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 22W3 mmGreen Frosted Acrylicengrave1200 mm/min (20 mm/s)60%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
  • Line interval: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

Falcon2 22W · Green Opaque Glossy Acrylic

Falcon2 22W, Green Opaque Glossy Acrylic: 2 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 22W3 mmGreen Opaque Glossy Acryliccut120 mm/min (2 mm/s)55%3
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 22W3 mmGreen Opaque Glossy Acrylicengrave6000 mm/min (100 mm/s)50%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
  • Line interval: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

Falcon2 22W · Green Transparent Acrylic

Falcon2 22W, Green Transparent Acrylic: 2 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 22W3 mmGreen Transparent Acryliccut120 mm/min (2 mm/s)55%3
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 22W3 mmGreen Transparent Acrylicengrave3000 mm/min (50 mm/s)20%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
  • Line interval: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

Falcon2 22W · Orange Frosted Acrylic

Falcon2 22W, Orange Frosted Acrylic: 2 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 22W3 mmOrange Frosted Acryliccut120 mm/min (2 mm/s)55%3
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 22W3 mmOrange Frosted Acrylicengrave1200 mm/min (20 mm/s)60%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
  • Line interval: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

These values are identical to Falcon2 22W's Orange Frosted Acrylic table above: both makers' documents print the same numbers.

Falcon2 22W · Orange Opaque Glossy Acrylic

Falcon2 22W, Orange Opaque Glossy Acrylic: 2 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 22W3 mmOrange Opaque Glossy Acryliccut120 mm/min (2 mm/s)55%2
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 22W3 mmOrange Opaque Glossy Acrylicengrave6000 mm/min (100 mm/s)50%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
  • Line interval: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

Falcon2 22W · Purple Frosted Acrylic

Falcon2 22W, Purple Frosted Acrylic: 2 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 22W3 mmPurple Frosted Acryliccut120 mm/min (2 mm/s)55%3
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 22W3 mmPurple Frosted Acrylicengrave1000 mm/min (16.67 mm/s)60%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
  • Line interval: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

Falcon2 22W · Purple Opaque Glossy Acrylic

Falcon2 22W, Purple Opaque Glossy Acrylic: 2 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 22W3 mmPurple Opaque Glossy Acryliccut120 mm/min (2 mm/s)55%2
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 22W3 mmPurple Opaque Glossy Acrylicengrave6000 mm/min (100 mm/s)50%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
  • Line interval: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

These values are identical to Falcon2 22W's Purple Opaque Glossy Acrylic table above: both makers' documents print the same numbers.

Falcon2 22W · Red Opaque Glossy Acrylic

Falcon2 22W, Red Opaque Glossy Acrylic: 2 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 22W3 mmRed Opaque Glossy Acryliccut120 mm/min (2 mm/s)55%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 22W3 mmRed Opaque Glossy Acrylicengrave6000 mm/min (100 mm/s)50%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
  • Line interval: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

Falcon2 22W · Red Transparent Acrylic

Falcon2 22W, Red Transparent Acrylic: 2 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 22W3 mmRed Transparent Acryliccut120 mm/min (2 mm/s)55%3
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 22W3 mmRed Transparent Acrylicengrave3000 mm/min (50 mm/s)20%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
  • Line interval: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

These values are identical to Falcon2 22W's Red Transparent Acrylic table above: both makers' documents print the same numbers.

Falcon2 22W · Yellow Transparent Acrylic

Falcon2 22W, Yellow Transparent Acrylic: 2 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 22W3 mmYellow Transparent Acryliccut120 mm/min (2 mm/s)55%2
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 22W3 mmYellow Transparent Acrylicengrave3000 mm/min (50 mm/s)20%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
  • Line interval: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

Not specified by Creality Falcon for any row here: air assist, focus and lens; line interval on engrave rows.

Source: Creality Falcon, read 2026-09-21; reviewed 2026-09-21. Document: CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings.

Falcon2 40W (Normal mode) · Black Acrylic

Falcon2 40W (Normal mode), Black Acrylic: 2 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 40W (Normal mode)4.6 mmBlack Acryliccut180 mm/min (3 mm/s)100%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 40W (Normal mode)7.6 mmBlack Acryliccut120 mm/min (2 mm/s)100%2
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

Falcon2 40W (Normal mode) · Black Frosted Acrylic

Falcon2 40W (Normal mode), Black Frosted Acrylic: 2 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 40W (Normal mode)3 mmBlack Frosted Acryliccut180 mm/min (3 mm/s)30%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 40W (Normal mode)3 mmBlack Frosted Acrylicengrave3000 mm/min (50 mm/s)22%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
  • Line interval: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

Falcon2 40W (Normal mode) · Black Opaque Glossy Acrylic

Falcon2 40W (Normal mode), Black Opaque Glossy Acrylic: 1 row, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 40W (Normal mode)3 mmBlack Opaque Glossy Acrylicengrave4000 mm/min (66.67 mm/s)26%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
  • Line interval: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

Falcon2 40W (Normal mode) · Green Frosted Acrylic

Falcon2 40W (Normal mode), Green Frosted Acrylic: 2 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 40W (Normal mode)3 mmGreen Frosted Acryliccut120 mm/min (2 mm/s)30%3
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 40W (Normal mode)3 mmGreen Frosted Acrylicengrave1200 mm/min (20 mm/s)30%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
  • Line interval: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

Falcon2 40W (Normal mode) · Green Opaque Glossy Acrylic

Falcon2 40W (Normal mode), Green Opaque Glossy Acrylic: 2 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 40W (Normal mode)3 mmGreen Opaque Glossy Acryliccut120 mm/min (2 mm/s)30%3
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 40W (Normal mode)3 mmGreen Opaque Glossy Acrylicengrave6000 mm/min (100 mm/s)26%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
  • Line interval: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

Falcon2 40W (Normal mode) · Green Transparent Acrylic

Falcon2 40W (Normal mode), Green Transparent Acrylic: 2 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 40W (Normal mode)3 mmGreen Transparent Acryliccut120 mm/min (2 mm/s)30%3
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 40W (Normal mode)3 mmGreen Transparent Acrylicengrave3000 mm/min (50 mm/s)12%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
  • Line interval: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

Falcon2 40W (Normal mode) · Orange Frosted Acrylic

Falcon2 40W (Normal mode), Orange Frosted Acrylic: 2 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 40W (Normal mode)3 mmOrange Frosted Acryliccut120 mm/min (2 mm/s)30%3
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 40W (Normal mode)3 mmOrange Frosted Acrylicengrave1200 mm/min (20 mm/s)30%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
  • Line interval: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

These values are identical to Falcon2 40W (Normal mode)'s Orange Frosted Acrylic table above: both makers' documents print the same numbers.

Falcon2 40W (Normal mode) · Orange Opaque Glossy Acrylic

Falcon2 40W (Normal mode), Orange Opaque Glossy Acrylic: 2 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 40W (Normal mode)3 mmOrange Opaque Glossy Acryliccut120 mm/min (2 mm/s)30%2
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 40W (Normal mode)3 mmOrange Opaque Glossy Acrylicengrave6000 mm/min (100 mm/s)26%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
  • Line interval: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

Falcon2 40W (Normal mode) · Purple Frosted Acrylic

Falcon2 40W (Normal mode), Purple Frosted Acrylic: 2 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 40W (Normal mode)3 mmPurple Frosted Acryliccut120 mm/min (2 mm/s)30%3
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 40W (Normal mode)3 mmPurple Frosted Acrylicengrave1000 mm/min (16.67 mm/s)30%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
  • Line interval: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

Falcon2 40W (Normal mode) · Purple Opaque Glossy Acrylic

Falcon2 40W (Normal mode), Purple Opaque Glossy Acrylic: 2 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 40W (Normal mode)3 mmPurple Opaque Glossy Acryliccut120 mm/min (2 mm/s)30%2
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 40W (Normal mode)3 mmPurple Opaque Glossy Acrylicengrave6000 mm/min (100 mm/s)26%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
  • Line interval: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

These values are identical to Falcon2 40W (Normal mode)'s Purple Opaque Glossy Acrylic table above: both makers' documents print the same numbers.

Falcon2 40W (Normal mode) · Red Opaque Glossy Acrylic

Falcon2 40W (Normal mode), Red Opaque Glossy Acrylic: 2 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 40W (Normal mode)3 mmRed Opaque Glossy Acryliccut120 mm/min (2 mm/s)30%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 40W (Normal mode)3 mmRed Opaque Glossy Acrylicengrave6000 mm/min (100 mm/s)26%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
  • Line interval: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

Falcon2 40W (Normal mode) · Red Transparent Acrylic

Falcon2 40W (Normal mode), Red Transparent Acrylic: 2 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 40W (Normal mode)3 mmRed Transparent Acryliccut120 mm/min (2 mm/s)30%3
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 40W (Normal mode)3 mmRed Transparent Acrylicengrave3000 mm/min (50 mm/s)12%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
  • Line interval: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

These values are identical to Falcon2 40W (Normal mode)'s Red Transparent Acrylic table above: both makers' documents print the same numbers.

Falcon2 40W (Normal mode) · Yellow Transparent Acrylic

Falcon2 40W (Normal mode), Yellow Transparent Acrylic: 2 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 40W (Normal mode)3 mmYellow Transparent Acryliccut120 mm/min (2 mm/s)30%2
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 40W (Normal mode)3 mmYellow Transparent Acrylicengrave3000 mm/min (50 mm/s)12%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
  • Line interval: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

Not specified by Creality Falcon for any row here: air assist, focus and lens; line interval on engrave rows.

Source: Creality Falcon, read 2026-09-21; reviewed 2026-09-21. Document: CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings.

xTool S1 20W blue module · Schwarzes Acryl

xTool S1 20W blue module, Schwarzes Acryl: 1 row, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
xTool S1 20W blue module3 mmSchwarzes Acrylcut4 mm/s = 240 mm/min100%1
  • Air assist: Not specified by xTool
  • Focus: Not specified by xTool
  • Lens: Not specified by xTool
xTool, read 2026-10-02. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

Every row: cut · 3 mm · 1 pass

Not specified by xTool for any row here: air assist, focus and lens.

Source: xTool, read 2026-10-02; reviewed 2026-09-21. Document: Materialeinstellungen für xTool Maschinen.

xTool S1 40W blue module · Schwarzes Acryl

xTool S1 40W blue module, Schwarzes Acryl: 2 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
xTool S1 40W blue module3 mmSchwarzes Acrylcut8 mm/s = 480 mm/min100%1
  • Air assist: Not specified by xTool
  • Focus: Not specified by xTool
  • Lens: Not specified by xTool
xTool, read 2026-10-02. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
xTool S1 40W blue module6 mmSchwarzes Acrylcut2 mm/s = 120 mm/min100%1
  • Air assist: Not specified by xTool
  • Focus: Not specified by xTool
  • Lens: Not specified by xTool
xTool, read 2026-10-02. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

Every row: cut · 1 pass

Not specified by xTool for any row here: air assist, focus and lens.

Source: xTool, read 2026-10-02; reviewed 2026-09-21. Document: Materialeinstellungen für xTool Maschinen.

Material safety statements from the sources

Quoted from laser makers' documents about each material. Not a complete safety procedure.

Acrylic

Fire risk · 3 statements from Creality and Epilog Laser
  • Fire: Epilog Laser, under “Introduction”: Many materials are susceptible to igniting; however, acrylic (in all its forms), has shown to be especially flammable when vector cutting with the laser. (Reducing Fire Hazards with your Laser, read 2026-09-21)
  • Fire: Epilog Laser, under “Warnings and Recommendations”: Utilizing the Air Assist feature will reduce the instance of flare-ups when working with flammable materials such as acrylic and wood. (Reducing Fire Hazards with your Laser, read 2026-09-21)
  • Fire: Creality, under “Security Statement”: It is forbidden to leave it unattended while the machine is working. (Creality Falcon2 (12W/22W/40W) User Manual, read 2026-09-21)

Reviewed 2026-09-21; next review due 2026-12-20.

Common questions

Can I use a row on another machine?

Each row belongs to the stated machine and configuration. A matching wattage or material name does not establish a setting for another machine.

Why are some fields marked not specified?

The publisher’s table prints speed, power and thickness, and sometimes passes, but not air assist, focus or lens. CutChart shows each unprinted field as not specified rather than filling it in.

Why are some combinations absent?

CutChart publishes a row only when its source, exact machine, material, operation and a sourced material-safety statement meet the reference requirements. An absent row is an unknown answer.

Source documents

Sources (7)
Creality Falcon: CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings (75 excerpts)

CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings

Publication date: 2023-12-23 · Read · Captured

  1. Black Acrylic | 4.6 | 100 | 300 | 2

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  2. 7.6 | 100 | 250 | 3

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  3. Black Frosted Acrylic | 3 | 95 | 200 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  4. Black Frosted Acrylic | 3 | 80 | 3000 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  5. Black Opaque Glossy Acrylic | 3 | 80 | 4000 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  6. Green Frosted Acrylic | 3 | 95 | 120 | 3

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  7. Green Frosted Acrylic | 3 | 90 | 1200 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  8. Green Opaque Glossy Acrylic | 3 | 95 | 120 | 3

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  9. Green Opaque Glossy Acrylic | 3 | 50 | 4000 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  10. Green Transparent Acrylic | 3 | 95 | 120 | 3

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  11. Green Transparent Acrylic | 3 | 40 | 3000 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  12. Orange Frosted Acrylic | 3 | 95 | 120 | 3

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  13. Orange Frosted Acrylic | 3 | 90 | 1200 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  14. Orange Opaque Glossy Acrylic | 3 | 95 | 120 | 2

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  15. Orange Opaque Glossy Acrylic | 3 | 50 | 4000 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  16. Purple Frosted Acrylic | 3 | 95 | 120 | 3

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  17. Purple Frosted Acrylic | 3 | 90 | 1000 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  18. Purple Opaque Glossy Acrylic | 3 | 95 | 120 | 2

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  19. Purple Opaque Glossy Acrylic | 3 | 50 | 4000 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  20. Red Opaque Glossy Acrylic | 3 | 95 | 120 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  21. Red Opaque Glossy Acrylic | 3 | 50 | 4000 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  22. Red Transparent Acrylic | 3 | 95 | 120 | 3

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  23. Red Transparent Acrylic | 3 | 40 | 3000 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  24. Yellow Transparent Acrylic | 3 | 95 | 120 | 2

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  25. Yellow Transparent Acrylic | 3 | 40 | 3000 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  26. Black Acrylic | 4.6 | 100 | 120 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  27. 7.6 | 100 | 120 | 2

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  28. Black Frosted Acrylic | 3 | 55 | 180 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  29. Black Frosted Acrylic | 3 | 40 | 3000 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  30. Black Opaque Glossy Acrylic | 3 | 50 | 4000 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  31. Green Frosted Acrylic | 3 | 55 | 120 | 3

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  32. Green Frosted Acrylic | 3 | 60 | 1200 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  33. Green Opaque Glossy Acrylic | 3 | 55 | 120 | 3

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  34. Green Opaque Glossy Acrylic | 3 | 50 | 6000 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  35. Green Transparent Acrylic | 3 | 55 | 120 | 3

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  36. Green Transparent Acrylic | 3 | 20 | 3000 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  37. Orange Frosted Acrylic | 3 | 55 | 120 | 3

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  38. Orange Frosted Acrylic | 3 | 60 | 1200 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  39. Orange Opaque Glossy Acrylic | 3 | 55 | 120 | 2

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  40. Orange Opaque Glossy Acrylic | 3 | 50 | 6000 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  41. Purple Frosted Acrylic | 3 | 55 | 120 | 3

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  42. Purple Frosted Acrylic | 3 | 60 | 1000 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  43. Purple Opaque Glossy Acrylic | 3 | 55 | 120 | 2

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  44. Purple Opaque Glossy Acrylic | 3 | 50 | 6000 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  45. Red Opaque Glossy Acrylic | 3 | 55 | 120 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  46. Red Opaque Glossy Acrylic | 3 | 50 | 6000 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  47. Red Transparent Acrylic | 3 | 55 | 120 | 3

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  48. Red Transparent Acrylic | 3 | 20 | 3000 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  49. Yellow Transparent Acrylic | 3 | 55 | 120 | 2

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  50. Yellow Transparent Acrylic | 3 | 20 | 3000 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  51. Black Acrylic | 4.6 | 100 | 180 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  52. 7.6 | 100 | 120 | 2

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  53. Black Frosted Acrylic | 3 | 30 | 180 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  54. Black Frosted Acrylic | 3 | 22 | 3000 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  55. Black Opaque Glossy Acrylic | 3 | 26 | 4000 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  56. Green Frosted Acrylic | 3 | 30 | 120 | 3

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  57. Green Frosted Acrylic | 3 | 30 | 1200 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  58. Green Opaque Glossy Acrylic | 3 | 30 | 120 | 3

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  59. Green Opaque Glossy Acrylic | 3 | 26 | 6000 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  60. Green Transparent Acrylic | 3 | 30 | 120 | 3

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  61. Green Transparent Acrylic | 3 | 12 | 3000 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  62. Orange Frosted Acrylic | 3 | 30 | 120 | 3

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  63. Orange Frosted Acrylic | 3 | 30 | 1200 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  64. Orange Opaque Glossy Acrylic | 3 | 30 | 120 | 2

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  65. Orange Opaque Glossy Acrylic | 3 | 26 | 6000 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  66. Purple Frosted Acrylic | 3 | 30 | 120 | 3

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  67. Purple Frosted Acrylic | 3 | 30 | 1000 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  68. Purple Opaque Glossy Acrylic | 3 | 30 | 120 | 2

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  69. Purple Opaque Glossy Acrylic | 3 | 26 | 6000 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  70. Red Opaque Glossy Acrylic | 3 | 30 | 120 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  71. Red Opaque Glossy Acrylic | 3 | 26 | 6000 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  72. Red Transparent Acrylic | 3 | 30 | 120 | 3

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  73. Red Transparent Acrylic | 3 | 12 | 3000 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  74. Yellow Transparent Acrylic | 3 | 30 | 120 | 2

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  75. Yellow Transparent Acrylic | 3 | 12 | 3000 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

Epilog Laser: Reducing Fire Hazards with your Laser (2 excerpts)

Reducing Fire Hazards with your Laser

Publication date not printed by Epilog Laser · Read · Captured

  1. Many materials are susceptible to igniting; however, acrylic (in all its forms), has shown to be especially flammable when vector cutting with the laser.

    Epilog Laser, Reducing Fire Hazards with your Laser, Introduction. Publication date not printed by Epilog Laser · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  2. Utilizing the Air Assist feature will reduce the instance of flare-ups when working with flammable materials such as acrylic and wood.

    Epilog Laser, Reducing Fire Hazards with your Laser, Warnings and Recommendations. Publication date not printed by Epilog Laser · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

Creality: Creality Falcon2 (12W/22W/40W) User Manual (1 excerpt)

Creality Falcon2 (12W/22W/40W) User Manual

Publication date not printed by Creality · Read · Captured

  1. 14. It is forbidden to leave it unattended while the machine is working.

    Creality, Creality Falcon2 (12W/22W/40W) User Manual, Security Statement. Publication date not printed by Creality · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

Monport: Monport 40W CO2 Laser Engraver Recommended Parameters (5 excerpts)

Monport 40W CO2 Laser Engraver Recommended Parameters

Publication date not printed by Monport · Read · Captured

  1. Cutting Thickness of Acrylic Material Thickness 1mm 2mm 3mm 4mm 5mm Speed(mm/s) 13 11 9 7 4 Power % 20 23 25 35 45

    Monport, Monport 40W CO2 Laser Engraver Recommended Parameters, Cutting Thickness of Acrylic. Publication date not printed by Monport · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  2. Cutting Thickness of Acrylic Material Thickness 1mm 2mm 3mm 4mm 5mm Speed(mm/s) 13 11 9 7 4 Power % 20 23 25 35 45

    Monport, Monport 40W CO2 Laser Engraver Recommended Parameters, Cutting Thickness of Acrylic. Publication date not printed by Monport · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  3. Cutting Thickness of Acrylic Material Thickness 1mm 2mm 3mm 4mm 5mm Speed(mm/s) 13 11 9 7 4 Power % 20 23 25 35 45

    Monport, Monport 40W CO2 Laser Engraver Recommended Parameters, Cutting Thickness of Acrylic. Publication date not printed by Monport · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  4. Cutting Thickness of Acrylic Material Thickness 1mm 2mm 3mm 4mm 5mm Speed(mm/s) 13 11 9 7 4 Power % 20 23 25 35 45

    Monport, Monport 40W CO2 Laser Engraver Recommended Parameters, Cutting Thickness of Acrylic. Publication date not printed by Monport · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  5. Cutting Thickness of Acrylic Material Thickness 1mm 2mm 3mm 4mm 5mm Speed(mm/s) 13 11 9 7 4 Power % 20 23 25 35 45

    Monport, Monport 40W CO2 Laser Engraver Recommended Parameters, Cutting Thickness of Acrylic. Publication date not printed by Monport · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

Monport: Model ONYX-R (2 excerpts)

Model ONYX-R

Publication date not printed by Monport · Read · Captured

  1. Attachment 1 Material Acrylic Basswood Canvas Cardboard Leather MDF Power (W) 50% 50% 25% 45% 30% 40% Engraving Speed 500 500 500 500 500 500 (mm/s) 100% 100% 100% 100% 100% 100% Power (W) 90% 90% 60% 90% 90% 90% Cutting Speed 35 65 350 200 80 30 (mm/s) 7% 13% 70% 40% 16% 6% Rec. Thickness (mm) 3 3 0.2 2 1.5 3 Resolution (dpi) 400 400 300 400 400 300

    Monport, Model ONYX-R, Attachment 1. Publication date not printed by Monport · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  2. Attachment 1 Material Acrylic Basswood Canvas Cardboard Leather MDF Power (W) 50% 50% 25% 45% 30% 40% Engraving Speed 500 500 500 500 500 500 (mm/s) 100% 100% 100% 100% 100% 100% Power (W) 90% 90% 60% 90% 90% 90% Cutting Speed 35 65 350 200 80 30 (mm/s) 7% 13% 70% 40% 16% 6% Rec. Thickness (mm) 3 3 0.2 2 1.5 3 Resolution (dpi) 400 400 300 400 400 300

    Monport, Model ONYX-R, Attachment 1. Publication date not printed by Monport · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

OMTech: POLAR 350 | 50W | CO2 Desktop Laser Engraver (2 excerpts)

POLAR 350 | 50W | CO2 Desktop Laser Engraver

Publication date not printed by OMTech · Read · Captured

  1. Acrylic 25 50% 500 100% 45 90% 35 7% 3 400

    OMTech, POLAR 350 | 50W | CO2 Desktop Laser Engraver, Average Engraving Settings. Publication date not printed by OMTech · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  2. Acrylic 25 50% 500 100% 45 90% 35 7% 3 400

    OMTech, POLAR 350 | 50W | CO2 Desktop Laser Engraver, Average Engraving Settings. Publication date not printed by OMTech · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

xTool: Materialeinstellungen für xTool Maschinen (22 excerpts)

Materialeinstellungen für xTool Maschinen

Publication date not printed by xTool · Read · Captured

  1. Dunkelrote Acrylglasplatte (undurchsichtig, glänzend) | 3.0 | Schnitt | D1 Pro 10W | 100 / 3 / 4

    xTool, Materialeinstellungen für xTool Maschinen, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  2. Dunkelrote Acrylglasplatte (undurchsichtig, glänzend) | 3.0 | Vektorgravur | D1 Pro 10W | 40 / 40 / 1

    xTool, Materialeinstellungen für xTool Maschinen, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  3. Dunkelrote Acrylglasplatte (undurchsichtig, glänzend) | 3.0 | Rastergravur | D1 Pro 10W | 80 / 50 / 1

    xTool, Materialeinstellungen für xTool Maschinen, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  4. Rote Acrylglasplatte (transparent, glänzend) | 3.0 | Schnitt | D1 Pro 10W | 100 / 3 / 4

    xTool, Materialeinstellungen für xTool Maschinen, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  5. Rote Acrylglasplatte (transparent, glänzend) | 3.0 | Vektorgravur | D1 Pro 10W | 40 / 50 / 1

    xTool, Materialeinstellungen für xTool Maschinen, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  6. Rote Acrylglasplatte (transparent, glänzend) | 3.0 | Rastergravur | D1 Pro 10W | 60 / 50 / 1

    xTool, Materialeinstellungen für xTool Maschinen, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  7. Braune Acrylglasplatte undurchsichtig glänzend | 2.0 | Schnitt | D1 Pro 20W | 100 / 5 / 3

    xTool, Materialeinstellungen für xTool Maschinen, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  8. Braune Acrylglasplatte undurchsichtig glänzend | 2.0 | Vektorgravur | D1 Pro 20W | 50 / 40 / 1

    xTool, Materialeinstellungen für xTool Maschinen, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  9. Braune Acrylglasplatte undurchsichtig glänzend | 2.0 | Rastergravur | D1 Pro 20W | 40 / 50 / 1

    xTool, Materialeinstellungen für xTool Maschinen, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  10. Dunkelrote Acrylglasplatte (undurchsichtig, glänzend) | 3.0 | Schnitt | D1 Pro 20W | 100 / 3 / 3

    xTool, Materialeinstellungen für xTool Maschinen, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  11. Dunkelrote Acrylglasplatte (undurchsichtig, glänzend) | 3.0 | Vektorgravur | D1 Pro 20W | 30 / 40 / 1

    xTool, Materialeinstellungen für xTool Maschinen, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  12. Dunkelrote Acrylglasplatte (undurchsichtig, glänzend) | 3.0 | Rastergravur | D1 Pro 20W | 40 / 50 / 1

    xTool, Materialeinstellungen für xTool Maschinen, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  13. Rote Acrylglasplatte (transparent, glänzend) | 3.0 | Schnitt | D1 Pro 20W | 100 / 3 / 3

    xTool, Materialeinstellungen für xTool Maschinen, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  14. Rote Acrylglasplatte (transparent, glänzend) | 3.0 | Vektorgravur | D1 Pro 20W | 30 / 40 / 1

    xTool, Materialeinstellungen für xTool Maschinen, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  15. Rote Acrylglasplatte (transparent, glänzend) | 3.0 | Rastergravur | D1 Pro 20W | 60 / 100 / 1

    xTool, Materialeinstellungen für xTool Maschinen, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  16. Blutrotes Acrylglas | 3.0 | Schnitt | D1 Pro 40W | 100 / 5 / 1

    xTool, Materialeinstellungen für xTool Maschinen, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  17. Schwarzes Acrylglas | 3.0 | Schnitt | D1 Pro 40W | 100 / 5 / 1

    xTool, Materialeinstellungen für xTool Maschinen, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  18. Dunkelrote Acrylglasplatte (undurchsichtig, glänzend) | 3.0 | Schnitt | D1 Pro 5W | 100 / 1 / 3

    xTool, Materialeinstellungen für xTool Maschinen, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  19. Dunkelrote Acrylglasplatte (undurchsichtig, glänzend) | 3.0 | Rastergravur | D1 Pro 5W | 100 / 50 / 1

    xTool, Materialeinstellungen für xTool Maschinen, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  20. Schwarzes Acryl | 3.0 | Vektorschnitt | 20 W Blaulicht-Laser | 100 / 4 / 1

    xTool, Materialeinstellungen für xTool Maschinen, xTool S1. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  21. Schwarzes Acryl | 3.0 | Vektorschnitt | 40 W Blaulicht-Laser | 100 / 8 / 1

    xTool, Materialeinstellungen für xTool Maschinen, xTool S1. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  22. Schwarzes Acryl | 6.0 | Vektorschnitt | 40 W Blaulicht-Laser | 100 / 2 / 1

    xTool, Materialeinstellungen für xTool Maschinen, xTool S1. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

Cite this page: Acrylic Laser Settings: Cut & Engrave Rows. CutChart. https://cutchart.com/settings/acrylic/ (sources read 2026-09-21 to 2026-10-02).

Check the blank before ordering

Match the supplier’s exact product identifier, composition, finish and stated thickness to your job. Keep the material safety document with that record. CutChart’s settings belong to the material and machine named by the original publisher. A similar shopping title does not establish the same sheet or suitable settings.

The material sourcing and thickness checklist explains what to save, what to measure and when a blank remains unidentified. Leave an unknown coating, adhesive or composition unresolved before using a laser.

Reference information only. Follow the instructions for your exact machine and material. A listed setting does not establish that a job is safe. Read the safety limits.