CutChart.

Creality Falcon2 Settings for Acrylic: 3 to 7.6 mm

Creality Falcon documents 75 speed and power settings for acrylic on the Falcon2. CutChart has not tested them; it read the maker’s documents on 2026-09-21.

Diode only · safety ↓ · sources ↓

75 documented rows match these filters.

Source-documented settings for acrylic on the Falcon2

About these numbers

Manufacturer-published reference parameters, not tested by CutChart

Speed: the figure the publisher printed, in bold, with the other unit converted under it. Type the number whose unit matches the speed box in your laser software. Not sure? Convert it here.

3 machines. Open one to see its settings.

Falcon2 12W · Black Acrylic

Falcon2 12W, Black Acrylic: 2 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 12W4.6 mmBlack Acryliccut300 mm/min (5 mm/s)100%2
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 12W7.6 mmBlack Acryliccut250 mm/min (4.17 mm/s)100%3
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

Falcon2 12W · Black Frosted Acrylic

Falcon2 12W, Black Frosted Acrylic: 2 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 12W3 mmBlack Frosted Acryliccut200 mm/min (3.33 mm/s)95%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 12W3 mmBlack Frosted Acrylicengrave3000 mm/min (50 mm/s)80%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
  • Line interval: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

Falcon2 12W · Black Opaque Glossy Acrylic

Falcon2 12W, Black Opaque Glossy Acrylic: 1 row, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 12W3 mmBlack Opaque Glossy Acrylicengrave4000 mm/min (66.67 mm/s)80%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
  • Line interval: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

Falcon2 12W · Green Frosted Acrylic

Falcon2 12W, Green Frosted Acrylic: 2 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 12W3 mmGreen Frosted Acryliccut120 mm/min (2 mm/s)95%3
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 12W3 mmGreen Frosted Acrylicengrave1200 mm/min (20 mm/s)90%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
  • Line interval: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

Falcon2 12W · Green Opaque Glossy Acrylic

Falcon2 12W, Green Opaque Glossy Acrylic: 2 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 12W3 mmGreen Opaque Glossy Acryliccut120 mm/min (2 mm/s)95%3
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 12W3 mmGreen Opaque Glossy Acrylicengrave4000 mm/min (66.67 mm/s)50%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
  • Line interval: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

Falcon2 12W · Green Transparent Acrylic

Falcon2 12W, Green Transparent Acrylic: 2 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 12W3 mmGreen Transparent Acryliccut120 mm/min (2 mm/s)95%3
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 12W3 mmGreen Transparent Acrylicengrave3000 mm/min (50 mm/s)40%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
  • Line interval: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

Falcon2 12W · Orange Frosted Acrylic

Falcon2 12W, Orange Frosted Acrylic: 2 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 12W3 mmOrange Frosted Acryliccut120 mm/min (2 mm/s)95%3
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 12W3 mmOrange Frosted Acrylicengrave1200 mm/min (20 mm/s)90%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
  • Line interval: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

These values are identical to Falcon2 12W's Orange Frosted Acrylic table above: both makers' documents print the same numbers.

Falcon2 12W · Orange Opaque Glossy Acrylic

Falcon2 12W, Orange Opaque Glossy Acrylic: 2 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 12W3 mmOrange Opaque Glossy Acryliccut120 mm/min (2 mm/s)95%2
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 12W3 mmOrange Opaque Glossy Acrylicengrave4000 mm/min (66.67 mm/s)50%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
  • Line interval: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

Falcon2 12W · Purple Frosted Acrylic

Falcon2 12W, Purple Frosted Acrylic: 2 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 12W3 mmPurple Frosted Acryliccut120 mm/min (2 mm/s)95%3
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 12W3 mmPurple Frosted Acrylicengrave1000 mm/min (16.67 mm/s)90%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
  • Line interval: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

Falcon2 12W · Purple Opaque Glossy Acrylic

Falcon2 12W, Purple Opaque Glossy Acrylic: 2 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 12W3 mmPurple Opaque Glossy Acryliccut120 mm/min (2 mm/s)95%2
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 12W3 mmPurple Opaque Glossy Acrylicengrave4000 mm/min (66.67 mm/s)50%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
  • Line interval: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

These values are identical to Falcon2 12W's Purple Opaque Glossy Acrylic table above: both makers' documents print the same numbers.

Falcon2 12W · Red Opaque Glossy Acrylic

Falcon2 12W, Red Opaque Glossy Acrylic: 2 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 12W3 mmRed Opaque Glossy Acryliccut120 mm/min (2 mm/s)95%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 12W3 mmRed Opaque Glossy Acrylicengrave4000 mm/min (66.67 mm/s)50%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
  • Line interval: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

Falcon2 12W · Red Transparent Acrylic

Falcon2 12W, Red Transparent Acrylic: 2 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 12W3 mmRed Transparent Acryliccut120 mm/min (2 mm/s)95%3
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 12W3 mmRed Transparent Acrylicengrave3000 mm/min (50 mm/s)40%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
  • Line interval: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

These values are identical to Falcon2 12W's Red Transparent Acrylic table above: both makers' documents print the same numbers.

Falcon2 12W · Yellow Transparent Acrylic

Falcon2 12W, Yellow Transparent Acrylic: 2 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 12W3 mmYellow Transparent Acryliccut120 mm/min (2 mm/s)95%2
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 12W3 mmYellow Transparent Acrylicengrave3000 mm/min (50 mm/s)40%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
  • Line interval: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

Not specified by Creality Falcon for any row here: air assist, focus and lens; line interval on engrave rows.

Source: Creality Falcon, read 2026-09-21; reviewed 2026-09-21. Document: CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings.

Falcon2 22W · Black Acrylic

Falcon2 22W, Black Acrylic: 2 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 22W4.6 mmBlack Acryliccut120 mm/min (2 mm/s)100%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 22W7.6 mmBlack Acryliccut120 mm/min (2 mm/s)100%2
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

Falcon2 22W · Black Frosted Acrylic

Falcon2 22W, Black Frosted Acrylic: 2 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 22W3 mmBlack Frosted Acryliccut180 mm/min (3 mm/s)55%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 22W3 mmBlack Frosted Acrylicengrave3000 mm/min (50 mm/s)40%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
  • Line interval: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

Falcon2 22W · Black Opaque Glossy Acrylic

Falcon2 22W, Black Opaque Glossy Acrylic: 1 row, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 22W3 mmBlack Opaque Glossy Acrylicengrave4000 mm/min (66.67 mm/s)50%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
  • Line interval: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

Falcon2 22W · Green Frosted Acrylic

Falcon2 22W, Green Frosted Acrylic: 2 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 22W3 mmGreen Frosted Acryliccut120 mm/min (2 mm/s)55%3
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 22W3 mmGreen Frosted Acrylicengrave1200 mm/min (20 mm/s)60%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
  • Line interval: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

Falcon2 22W · Green Opaque Glossy Acrylic

Falcon2 22W, Green Opaque Glossy Acrylic: 2 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 22W3 mmGreen Opaque Glossy Acryliccut120 mm/min (2 mm/s)55%3
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 22W3 mmGreen Opaque Glossy Acrylicengrave6000 mm/min (100 mm/s)50%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
  • Line interval: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

Falcon2 22W · Green Transparent Acrylic

Falcon2 22W, Green Transparent Acrylic: 2 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 22W3 mmGreen Transparent Acryliccut120 mm/min (2 mm/s)55%3
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 22W3 mmGreen Transparent Acrylicengrave3000 mm/min (50 mm/s)20%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
  • Line interval: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

Falcon2 22W · Orange Frosted Acrylic

Falcon2 22W, Orange Frosted Acrylic: 2 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 22W3 mmOrange Frosted Acryliccut120 mm/min (2 mm/s)55%3
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 22W3 mmOrange Frosted Acrylicengrave1200 mm/min (20 mm/s)60%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
  • Line interval: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

These values are identical to Falcon2 22W's Orange Frosted Acrylic table above: both makers' documents print the same numbers.

Falcon2 22W · Orange Opaque Glossy Acrylic

Falcon2 22W, Orange Opaque Glossy Acrylic: 2 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 22W3 mmOrange Opaque Glossy Acryliccut120 mm/min (2 mm/s)55%2
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 22W3 mmOrange Opaque Glossy Acrylicengrave6000 mm/min (100 mm/s)50%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
  • Line interval: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

Falcon2 22W · Purple Frosted Acrylic

Falcon2 22W, Purple Frosted Acrylic: 2 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 22W3 mmPurple Frosted Acryliccut120 mm/min (2 mm/s)55%3
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 22W3 mmPurple Frosted Acrylicengrave1000 mm/min (16.67 mm/s)60%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
  • Line interval: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

Falcon2 22W · Purple Opaque Glossy Acrylic

Falcon2 22W, Purple Opaque Glossy Acrylic: 2 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 22W3 mmPurple Opaque Glossy Acryliccut120 mm/min (2 mm/s)55%2
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 22W3 mmPurple Opaque Glossy Acrylicengrave6000 mm/min (100 mm/s)50%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
  • Line interval: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

These values are identical to Falcon2 22W's Purple Opaque Glossy Acrylic table above: both makers' documents print the same numbers.

Falcon2 22W · Red Opaque Glossy Acrylic

Falcon2 22W, Red Opaque Glossy Acrylic: 2 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 22W3 mmRed Opaque Glossy Acryliccut120 mm/min (2 mm/s)55%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 22W3 mmRed Opaque Glossy Acrylicengrave6000 mm/min (100 mm/s)50%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
  • Line interval: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

Falcon2 22W · Red Transparent Acrylic

Falcon2 22W, Red Transparent Acrylic: 2 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 22W3 mmRed Transparent Acryliccut120 mm/min (2 mm/s)55%3
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 22W3 mmRed Transparent Acrylicengrave3000 mm/min (50 mm/s)20%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
  • Line interval: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

These values are identical to Falcon2 22W's Red Transparent Acrylic table above: both makers' documents print the same numbers.

Falcon2 22W · Yellow Transparent Acrylic

Falcon2 22W, Yellow Transparent Acrylic: 2 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 22W3 mmYellow Transparent Acryliccut120 mm/min (2 mm/s)55%2
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 22W3 mmYellow Transparent Acrylicengrave3000 mm/min (50 mm/s)20%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
  • Line interval: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

Not specified by Creality Falcon for any row here: air assist, focus and lens; line interval on engrave rows.

Source: Creality Falcon, read 2026-09-21; reviewed 2026-09-21. Document: CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings.

Falcon2 40W (Normal mode) · Black Acrylic

Falcon2 40W (Normal mode), Black Acrylic: 2 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 40W (Normal mode)4.6 mmBlack Acryliccut180 mm/min (3 mm/s)100%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 40W (Normal mode)7.6 mmBlack Acryliccut120 mm/min (2 mm/s)100%2
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

Falcon2 40W (Normal mode) · Black Frosted Acrylic

Falcon2 40W (Normal mode), Black Frosted Acrylic: 2 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 40W (Normal mode)3 mmBlack Frosted Acryliccut180 mm/min (3 mm/s)30%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 40W (Normal mode)3 mmBlack Frosted Acrylicengrave3000 mm/min (50 mm/s)22%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
  • Line interval: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

Falcon2 40W (Normal mode) · Black Opaque Glossy Acrylic

Falcon2 40W (Normal mode), Black Opaque Glossy Acrylic: 1 row, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 40W (Normal mode)3 mmBlack Opaque Glossy Acrylicengrave4000 mm/min (66.67 mm/s)26%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
  • Line interval: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

Falcon2 40W (Normal mode) · Green Frosted Acrylic

Falcon2 40W (Normal mode), Green Frosted Acrylic: 2 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 40W (Normal mode)3 mmGreen Frosted Acryliccut120 mm/min (2 mm/s)30%3
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 40W (Normal mode)3 mmGreen Frosted Acrylicengrave1200 mm/min (20 mm/s)30%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
  • Line interval: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

Falcon2 40W (Normal mode) · Green Opaque Glossy Acrylic

Falcon2 40W (Normal mode), Green Opaque Glossy Acrylic: 2 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 40W (Normal mode)3 mmGreen Opaque Glossy Acryliccut120 mm/min (2 mm/s)30%3
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 40W (Normal mode)3 mmGreen Opaque Glossy Acrylicengrave6000 mm/min (100 mm/s)26%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
  • Line interval: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

Falcon2 40W (Normal mode) · Green Transparent Acrylic

Falcon2 40W (Normal mode), Green Transparent Acrylic: 2 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 40W (Normal mode)3 mmGreen Transparent Acryliccut120 mm/min (2 mm/s)30%3
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 40W (Normal mode)3 mmGreen Transparent Acrylicengrave3000 mm/min (50 mm/s)12%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
  • Line interval: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

Falcon2 40W (Normal mode) · Orange Frosted Acrylic

Falcon2 40W (Normal mode), Orange Frosted Acrylic: 2 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 40W (Normal mode)3 mmOrange Frosted Acryliccut120 mm/min (2 mm/s)30%3
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 40W (Normal mode)3 mmOrange Frosted Acrylicengrave1200 mm/min (20 mm/s)30%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
  • Line interval: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

These values are identical to Falcon2 40W (Normal mode)'s Orange Frosted Acrylic table above: both makers' documents print the same numbers.

Falcon2 40W (Normal mode) · Orange Opaque Glossy Acrylic

Falcon2 40W (Normal mode), Orange Opaque Glossy Acrylic: 2 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 40W (Normal mode)3 mmOrange Opaque Glossy Acryliccut120 mm/min (2 mm/s)30%2
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 40W (Normal mode)3 mmOrange Opaque Glossy Acrylicengrave6000 mm/min (100 mm/s)26%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
  • Line interval: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

Falcon2 40W (Normal mode) · Purple Frosted Acrylic

Falcon2 40W (Normal mode), Purple Frosted Acrylic: 2 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 40W (Normal mode)3 mmPurple Frosted Acryliccut120 mm/min (2 mm/s)30%3
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 40W (Normal mode)3 mmPurple Frosted Acrylicengrave1000 mm/min (16.67 mm/s)30%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
  • Line interval: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

Falcon2 40W (Normal mode) · Purple Opaque Glossy Acrylic

Falcon2 40W (Normal mode), Purple Opaque Glossy Acrylic: 2 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 40W (Normal mode)3 mmPurple Opaque Glossy Acryliccut120 mm/min (2 mm/s)30%2
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 40W (Normal mode)3 mmPurple Opaque Glossy Acrylicengrave6000 mm/min (100 mm/s)26%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
  • Line interval: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

These values are identical to Falcon2 40W (Normal mode)'s Purple Opaque Glossy Acrylic table above: both makers' documents print the same numbers.

Falcon2 40W (Normal mode) · Red Opaque Glossy Acrylic

Falcon2 40W (Normal mode), Red Opaque Glossy Acrylic: 2 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 40W (Normal mode)3 mmRed Opaque Glossy Acryliccut120 mm/min (2 mm/s)30%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 40W (Normal mode)3 mmRed Opaque Glossy Acrylicengrave6000 mm/min (100 mm/s)26%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
  • Line interval: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

Falcon2 40W (Normal mode) · Red Transparent Acrylic

Falcon2 40W (Normal mode), Red Transparent Acrylic: 2 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 40W (Normal mode)3 mmRed Transparent Acryliccut120 mm/min (2 mm/s)30%3
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 40W (Normal mode)3 mmRed Transparent Acrylicengrave3000 mm/min (50 mm/s)12%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
  • Line interval: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

These values are identical to Falcon2 40W (Normal mode)'s Red Transparent Acrylic table above: both makers' documents print the same numbers.

Falcon2 40W (Normal mode) · Yellow Transparent Acrylic

Falcon2 40W (Normal mode), Yellow Transparent Acrylic: 2 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
Falcon2 40W (Normal mode)3 mmYellow Transparent Acryliccut120 mm/min (2 mm/s)30%2
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
Falcon2 40W (Normal mode)3 mmYellow Transparent Acrylicengrave3000 mm/min (50 mm/s)12%1
  • Air assist: Not specified by Creality Falcon
  • Focus: Not specified by Creality Falcon
  • Lens: Not specified by Creality Falcon
  • Line interval: Not specified by Creality Falcon
Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

Not specified by Creality Falcon for any row here: air assist, focus and lens; line interval on engrave rows.

Source: Creality Falcon, read 2026-09-21; reviewed 2026-09-21. Document: CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings.

Material safety statements from the sources

Quoted from laser makers' documents about each material. Not a complete safety procedure.

Acrylic

Fire risk · 3 statements from Creality and Epilog Laser
  • Fire: Epilog Laser, under “Introduction”: Many materials are susceptible to igniting; however, acrylic (in all its forms), has shown to be especially flammable when vector cutting with the laser. (Reducing Fire Hazards with your Laser, read 2026-09-21)
  • Fire: Epilog Laser, under “Warnings and Recommendations”: Utilizing the Air Assist feature will reduce the instance of flare-ups when working with flammable materials such as acrylic and wood. (Reducing Fire Hazards with your Laser, read 2026-09-21)
  • Fire: Creality, under “Security Statement”: It is forbidden to leave it unattended while the machine is working. (Creality Falcon2 (12W/22W/40W) User Manual, read 2026-09-21)

Reviewed 2026-09-21; next review due 2026-12-20.

Common questions

Can I use a row on another machine?

Each row belongs to the stated machine and configuration. A matching wattage or material name does not establish a setting for another machine.

Why are some fields marked not specified?

The publisher’s table prints speed, power and thickness, and sometimes passes, but not air assist, focus or lens. CutChart shows each unprinted field as not specified rather than filling it in.

Why are some combinations absent?

CutChart publishes a row only when its source, exact machine, material, operation and a sourced material-safety statement meet the reference requirements. An absent row is an unknown answer.

Source documents

Sources (3)
Creality Falcon: CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings (75 excerpts)

CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings

Publication date: 2023-12-23 · Read · Captured

  1. Black Acrylic | 4.6 | 100 | 300 | 2

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  2. 7.6 | 100 | 250 | 3

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  3. Black Frosted Acrylic | 3 | 95 | 200 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  4. Black Frosted Acrylic | 3 | 80 | 3000 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  5. Black Opaque Glossy Acrylic | 3 | 80 | 4000 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  6. Green Frosted Acrylic | 3 | 95 | 120 | 3

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  7. Green Frosted Acrylic | 3 | 90 | 1200 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  8. Green Opaque Glossy Acrylic | 3 | 95 | 120 | 3

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  9. Green Opaque Glossy Acrylic | 3 | 50 | 4000 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  10. Green Transparent Acrylic | 3 | 95 | 120 | 3

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  11. Green Transparent Acrylic | 3 | 40 | 3000 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  12. Orange Frosted Acrylic | 3 | 95 | 120 | 3

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  13. Orange Frosted Acrylic | 3 | 90 | 1200 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  14. Orange Opaque Glossy Acrylic | 3 | 95 | 120 | 2

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  15. Orange Opaque Glossy Acrylic | 3 | 50 | 4000 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  16. Purple Frosted Acrylic | 3 | 95 | 120 | 3

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  17. Purple Frosted Acrylic | 3 | 90 | 1000 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  18. Purple Opaque Glossy Acrylic | 3 | 95 | 120 | 2

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  19. Purple Opaque Glossy Acrylic | 3 | 50 | 4000 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  20. Red Opaque Glossy Acrylic | 3 | 95 | 120 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  21. Red Opaque Glossy Acrylic | 3 | 50 | 4000 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  22. Red Transparent Acrylic | 3 | 95 | 120 | 3

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  23. Red Transparent Acrylic | 3 | 40 | 3000 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  24. Yellow Transparent Acrylic | 3 | 95 | 120 | 2

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  25. Yellow Transparent Acrylic | 3 | 40 | 3000 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  26. Black Acrylic | 4.6 | 100 | 120 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  27. 7.6 | 100 | 120 | 2

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  28. Black Frosted Acrylic | 3 | 55 | 180 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  29. Black Frosted Acrylic | 3 | 40 | 3000 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  30. Black Opaque Glossy Acrylic | 3 | 50 | 4000 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  31. Green Frosted Acrylic | 3 | 55 | 120 | 3

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  32. Green Frosted Acrylic | 3 | 60 | 1200 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  33. Green Opaque Glossy Acrylic | 3 | 55 | 120 | 3

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  34. Green Opaque Glossy Acrylic | 3 | 50 | 6000 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  35. Green Transparent Acrylic | 3 | 55 | 120 | 3

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  36. Green Transparent Acrylic | 3 | 20 | 3000 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  37. Orange Frosted Acrylic | 3 | 55 | 120 | 3

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  38. Orange Frosted Acrylic | 3 | 60 | 1200 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  39. Orange Opaque Glossy Acrylic | 3 | 55 | 120 | 2

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  40. Orange Opaque Glossy Acrylic | 3 | 50 | 6000 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  41. Purple Frosted Acrylic | 3 | 55 | 120 | 3

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  42. Purple Frosted Acrylic | 3 | 60 | 1000 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  43. Purple Opaque Glossy Acrylic | 3 | 55 | 120 | 2

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  44. Purple Opaque Glossy Acrylic | 3 | 50 | 6000 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  45. Red Opaque Glossy Acrylic | 3 | 55 | 120 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  46. Red Opaque Glossy Acrylic | 3 | 50 | 6000 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  47. Red Transparent Acrylic | 3 | 55 | 120 | 3

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  48. Red Transparent Acrylic | 3 | 20 | 3000 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  49. Yellow Transparent Acrylic | 3 | 55 | 120 | 2

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  50. Yellow Transparent Acrylic | 3 | 20 | 3000 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  51. Black Acrylic | 4.6 | 100 | 180 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  52. 7.6 | 100 | 120 | 2

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  53. Black Frosted Acrylic | 3 | 30 | 180 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  54. Black Frosted Acrylic | 3 | 22 | 3000 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  55. Black Opaque Glossy Acrylic | 3 | 26 | 4000 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  56. Green Frosted Acrylic | 3 | 30 | 120 | 3

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  57. Green Frosted Acrylic | 3 | 30 | 1200 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  58. Green Opaque Glossy Acrylic | 3 | 30 | 120 | 3

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  59. Green Opaque Glossy Acrylic | 3 | 26 | 6000 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  60. Green Transparent Acrylic | 3 | 30 | 120 | 3

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  61. Green Transparent Acrylic | 3 | 12 | 3000 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  62. Orange Frosted Acrylic | 3 | 30 | 120 | 3

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  63. Orange Frosted Acrylic | 3 | 30 | 1200 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  64. Orange Opaque Glossy Acrylic | 3 | 30 | 120 | 2

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  65. Orange Opaque Glossy Acrylic | 3 | 26 | 6000 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  66. Purple Frosted Acrylic | 3 | 30 | 120 | 3

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  67. Purple Frosted Acrylic | 3 | 30 | 1000 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  68. Purple Opaque Glossy Acrylic | 3 | 30 | 120 | 2

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  69. Purple Opaque Glossy Acrylic | 3 | 26 | 6000 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  70. Red Opaque Glossy Acrylic | 3 | 30 | 120 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  71. Red Opaque Glossy Acrylic | 3 | 26 | 6000 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  72. Red Transparent Acrylic | 3 | 30 | 120 | 3

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  73. Red Transparent Acrylic | 3 | 12 | 3000 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  74. Yellow Transparent Acrylic | 3 | 30 | 120 | 2

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  75. Yellow Transparent Acrylic | 3 | 12 | 3000 | 1

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

Epilog Laser: Reducing Fire Hazards with your Laser (2 excerpts)

Reducing Fire Hazards with your Laser

Publication date not printed by Epilog Laser · Read · Captured

  1. Many materials are susceptible to igniting; however, acrylic (in all its forms), has shown to be especially flammable when vector cutting with the laser.

    Epilog Laser, Reducing Fire Hazards with your Laser, Introduction. Publication date not printed by Epilog Laser · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  2. Utilizing the Air Assist feature will reduce the instance of flare-ups when working with flammable materials such as acrylic and wood.

    Epilog Laser, Reducing Fire Hazards with your Laser, Warnings and Recommendations. Publication date not printed by Epilog Laser · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

Creality: Creality Falcon2 (12W/22W/40W) User Manual (1 excerpt)

Creality Falcon2 (12W/22W/40W) User Manual

Publication date not printed by Creality · Read · Captured

  1. 14. It is forbidden to leave it unattended while the machine is working.

    Creality, Creality Falcon2 (12W/22W/40W) User Manual, Security Statement. Publication date not printed by Creality · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

Cite this page: Creality Falcon2 Settings for Acrylic: 3 to 7.6 mm. CutChart. https://cutchart.com/settings/acrylic/creality-falcon-2/ (sources read 2026-09-21).

Reference information only. Follow the instructions for your exact machine and material. A listed setting does not establish that a job is safe. Read the safety limits.