Creality Falcon2 Settings for Anodized Aluminum: 3 mm
Creality Falcon documents 3 speed and power settings for anodized aluminum on the Falcon2. CutChart has not tested them; it read the maker’s documents on 2026-09-21.
Diode only · safety ↓ · sources ↓
Source-documented settings for anodized aluminum on the Falcon2
About these numbers
Manufacturer-published reference parameters, not tested by CutChart
Speed: the figure the publisher printed, in bold, with the other unit converted under it. Type the number whose unit matches the speed box in your laser software. Not sure? Convert it here.
Anodized Aluminum · engrave · 3 mm · 1 pass
| Machine | Thickness | Material as printed | Operation | Speed | Power | Passes | Not printed by the publisher | Source |
|---|---|---|---|---|---|---|---|---|
| Falcon2 12W | 3 mm | Anodized Aluminum | engrave | 250 mm/min (4.17 mm/s) | 100% | 1 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 22W | 3 mm | Anodized Aluminum | engrave | 6000 mm/min (100 mm/s) | 60% | 1 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| Falcon2 40W (Normal mode) | 3 mm | Anodized Aluminum | engrave | 6000 mm/min (100 mm/s) | 30% | 1 |
| Creality Falcon, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
Not specified by Creality Falcon: air assist, focus, lens and line interval.
Source: Creality Falcon, read 2026-09-21; reviewed 2026-09-21. Document: CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings.
Engrave rows only. No cutting settings are published here.
Material safety statements from the sources
Quoted from laser makers' documents about each material. Not a complete safety procedure.
Anodized aluminum
Ventilate and fire risk · 3 statements from Creality
- Fire: Creality, under “Security Statement”:
It is forbidden to leave it unattended while the machine is working.
(Creality Falcon2 (12W/22W/40W) User Manual, read 2026-09-21) - Fire: Creality, under “Security Statement”:
Prepare fire extinguishers as a backup. Regularly maintain and inspect the fire extinguishers.
(Creality Falcon2 (12W/22W/40W) User Manual, read 2026-09-21) - Ventilation: Creality, under “Security Statement”:
Smoke or smells may be produced during laser engraving and cutting. It is recommended to operate in a well-ventilated environment.
(Creality Falcon2 (12W/22W/40W) User Manual, read 2026-09-21)
Reviewed 2026-09-21; next review due 2026-12-20.
Common questions
Can I use a row on another machine?
Each row belongs to the stated machine and configuration. A matching wattage or material name does not establish a setting for another machine.
Why are some fields marked not specified?
The publisher’s table prints speed, power and thickness, and sometimes passes, but not air assist, focus or lens. CutChart shows each unprinted field as not specified rather than filling it in.
Why are some combinations absent?
CutChart publishes a row only when its source, exact machine, material, operation and a sourced material-safety statement meet the reference requirements. An absent row is an unknown answer.
Source documents
Sources (2)
Creality Falcon: CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings (3 excerpts)
CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings
Publication date: 2023-12-23 · Read · Captured
Anodized Aluminum | 3 | 100 | 250 | 1
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 12W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Anodized Aluminum | 3 | 60 | 6000 | 1
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 22W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Anodized Aluminum | 3 | 30 | 6000 | 1
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon2 40W Laser Engraving & Cutting Parameter Settings. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Creality: Creality Falcon2 (12W/22W/40W) User Manual (3 excerpts)
Creality Falcon2 (12W/22W/40W) User Manual
Publication date not printed by Creality · Read · Captured
13. Prepare fire extinguishers as a backup. Regularly maintain and inspect the fire extinguishers.
Creality, Creality Falcon2 (12W/22W/40W) User Manual, Security Statement. Publication date not printed by Creality · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
14. It is forbidden to leave it unattended while the machine is working.
Creality, Creality Falcon2 (12W/22W/40W) User Manual, Security Statement. Publication date not printed by Creality · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
11. Smoke or smells may be produced during laser engraving and cutting. It is recommended to operate in a well-ventilated environment.
Creality, Creality Falcon2 (12W/22W/40W) User Manual, Security Statement. Publication date not printed by Creality · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Cite this page: Creality Falcon2 Settings for Anodized Aluminum: 3 mm. CutChart. https://cutchart.com/settings/anodized-aluminum/creality-falcon-2/ (sources read 2026-09-21).
Reference information only. Follow the instructions for your exact machine and material. A listed setting does not establish that a job is safe. Read the safety limits.