CutChart.

xTool D1 Pro Settings for Plywood: 3 to 8 mm

xTool documents 34 speed and power settings for plywood on the D1 Pro. CutChart has not tested them; it read the maker’s documents on 2026-10-02.

Diode only · safety ↓ · sources ↓

34 documented rows match these filters.

Source-documented settings for plywood on the D1 Pro

About these numbers

Manufacturer-published reference parameters, not tested by CutChart

Speed: the figure the publisher printed, in bold, with mm/min converted under it. Type the number whose unit matches the speed box in your laser software. Not sure? Convert it here.

D1 Pro 5W

D1 Pro 5W · Kirschensperrholz

D1 Pro 5W, Kirschensperrholz: 1 row, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
D1 Pro 5W3 mmKirschensperrholzcut2 mm/s = 120 mm/min100%2
  • Air assist: Not specified by xTool
  • Focus: Not specified by xTool
  • Lens: Not specified by xTool
xTool, read 2026-10-02. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

D1 Pro 5W · Lindensperrholz

D1 Pro 5W, Lindensperrholz: 1 row, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
D1 Pro 5W3 mmLindensperrholzcut2 mm/s = 120 mm/min100%2
  • Air assist: Not specified by xTool
  • Focus: Not specified by xTool
  • Lens: Not specified by xTool
xTool, read 2026-10-02. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

These values are identical to D1 Pro 5W's Lindensperrholz table above: both makers' documents print the same numbers.

D1 Pro 5W · Walnusssperrholz

D1 Pro 5W, Walnusssperrholz: 1 row, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
D1 Pro 5W3 mmWalnusssperrholzcut4 mm/s = 240 mm/min100%3
  • Air assist: Not specified by xTool
  • Focus: Not specified by xTool
  • Lens: Not specified by xTool
xTool, read 2026-10-02. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

Every row: cut · 3 mm

Not specified by xTool for any row here: air assist, focus and lens.

Source: xTool, read 2026-10-02; reviewed 2026-09-21. Document: Materialeinstellungen für xTool Maschinen.

D1 Pro 10W

D1 Pro 10W · Birkensperrholz

D1 Pro 10W, Birkensperrholz: 3 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
D1 Pro 10W3 mmBirkensperrholzcut3 mm/s = 180 mm/min100%1
  • Air assist: Not specified by xTool
  • Focus: Not specified by xTool
  • Lens: Not specified by xTool
xTool, read 2026-10-02. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
D1 Pro 10W3 mmBirkensperrholzengrave30 mm/s = 1800 mm/min50%1
  • Air assist: Not specified by xTool
  • Focus: Not specified by xTool
  • Lens: Not specified by xTool
  • Line interval: Not specified by xTool
xTool, read 2026-10-02. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
D1 Pro 10W3 mmBirkensperrholzfill100 mm/s = 6000 mm/min80%1
  • Air assist: Not specified by xTool
  • Focus: Not specified by xTool
  • Lens: Not specified by xTool
  • Line interval: Not specified by xTool
xTool, read 2026-10-02. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

D1 Pro 10W · Kiefernsperrholz

D1 Pro 10W, Kiefernsperrholz: 1 row, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
D1 Pro 10W3 mmKiefernsperrholzcut4 mm/s = 240 mm/min100%2
  • Air assist: Not specified by xTool
  • Focus: Not specified by xTool
  • Lens: Not specified by xTool
xTool, read 2026-10-02. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

D1 Pro 10W · Lindensperrholz

D1 Pro 10W, Lindensperrholz: 2 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
D1 Pro 10W3 mmLindensperrholzcut3 mm/s = 180 mm/min100%2
  • Air assist: Not specified by xTool
  • Focus: Not specified by xTool
  • Lens: Not specified by xTool
xTool, read 2026-10-02. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
D1 Pro 10W6 mmLindensperrholzcut2 mm/s = 120 mm/min100%4
  • Air assist: Not specified by xTool
  • Focus: Not specified by xTool
  • Lens: Not specified by xTool
xTool, read 2026-10-02. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

D1 Pro 10W · Mahagonisperrholz

D1 Pro 10W, Mahagonisperrholz: 1 row, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
D1 Pro 10W3 mmMahagonisperrholzcut4 mm/s = 240 mm/min100%3
  • Air assist: Not specified by xTool
  • Focus: Not specified by xTool
  • Lens: Not specified by xTool
xTool, read 2026-10-02. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

These values are identical to the D1 Pro 5W table above: both makers' documents print the same numbers.

D1 Pro 10W · Mandschurisches Eschensperrholz

D1 Pro 10W, Mandschurisches Eschensperrholz: 1 row, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
D1 Pro 10W3 mmMandschurisches Eschensperrholzcut3 mm/s = 180 mm/min100%3
  • Air assist: Not specified by xTool
  • Focus: Not specified by xTool
  • Lens: Not specified by xTool
xTool, read 2026-10-02. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

D1 Pro 10W · Walnusssperrholz

D1 Pro 10W, Walnusssperrholz: 4 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
D1 Pro 10W3 mmWalnusssperrholzcut3 mm/s = 180 mm/min100%1
  • Air assist: Not specified by xTool
  • Focus: Not specified by xTool
  • Lens: Not specified by xTool
xTool, read 2026-10-02. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
D1 Pro 10W6 mmWalnusssperrholzcut60 mm/s = 3600 mm/min80%1
  • Air assist: Not specified by xTool
  • Focus: Not specified by xTool
  • Lens: Not specified by xTool
xTool, read 2026-10-02. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
D1 Pro 10W3 mmWalnusssperrholzengrave30 mm/s = 1800 mm/min50%1
  • Air assist: Not specified by xTool
  • Focus: Not specified by xTool
  • Lens: Not specified by xTool
  • Line interval: Not specified by xTool
xTool, read 2026-10-02. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
D1 Pro 10W3 mmWalnusssperrholzfill100 mm/s = 6000 mm/min80%1
  • Air assist: Not specified by xTool
  • Focus: Not specified by xTool
  • Lens: Not specified by xTool
  • Line interval: Not specified by xTool
xTool, read 2026-10-02. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

D1 Pro 10W · White oak plywood

D1 Pro 10W, White oak plywood: 1 row, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
D1 Pro 10W3 mmWhite oak plywoodcut3 mm/s = 180 mm/min100%2
  • Air assist: Not specified by xTool
  • Focus: Not specified by xTool
  • Lens: Not specified by xTool
xTool, read 2026-10-02. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

Not specified by xTool for any row here: air assist, focus and lens; line interval on fill and engrave rows.

Source: xTool, read 2026-10-02; reviewed 2026-09-21. Document: Materialeinstellungen für xTool Maschinen.

D1 Pro 20W

D1 Pro 20W · Birkensperrholz

D1 Pro 20W, Birkensperrholz: 2 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
D1 Pro 20W3 mmBirkensperrholzcut6 mm/s = 360 mm/min100%1
  • Air assist: Not specified by xTool
  • Focus: Not specified by xTool
  • Lens: Not specified by xTool
xTool, read 2026-10-02. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
D1 Pro 20W6 mmBirkensperrholzcut4 mm/s = 240 mm/min100%3
  • Air assist: Not specified by xTool
  • Focus: Not specified by xTool
  • Lens: Not specified by xTool
xTool, read 2026-10-02. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

D1 Pro 20W · Kiefernsperrholz

D1 Pro 20W, Kiefernsperrholz: 1 row, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
D1 Pro 20W3 mmKiefernsperrholzcut5 mm/s = 300 mm/min100%1
  • Air assist: Not specified by xTool
  • Focus: Not specified by xTool
  • Lens: Not specified by xTool
xTool, read 2026-10-02. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

D1 Pro 20W · Lindensperrholz

D1 Pro 20W, Lindensperrholz: 4 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
D1 Pro 20W3 mmLindensperrholzcut6 mm/s = 360 mm/min100%1
  • Air assist: Not specified by xTool
  • Focus: Not specified by xTool
  • Lens: Not specified by xTool
xTool, read 2026-10-02. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
D1 Pro 20W6 mmLindensperrholzcut6 mm/s = 360 mm/min100%3
  • Air assist: Not specified by xTool
  • Focus: Not specified by xTool
  • Lens: Not specified by xTool
xTool, read 2026-10-02. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
D1 Pro 20W3 mmLindensperrholzengrave60 mm/s = 3600 mm/min80%1
  • Air assist: Not specified by xTool
  • Focus: Not specified by xTool
  • Lens: Not specified by xTool
  • Line interval: Not specified by xTool
xTool, read 2026-10-02. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
D1 Pro 20W3 mmLindensperrholzfill100 mm/s = 6000 mm/min60%1
  • Air assist: Not specified by xTool
  • Focus: Not specified by xTool
  • Lens: Not specified by xTool
  • Line interval: Not specified by xTool
xTool, read 2026-10-02. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

D1 Pro 20W · Mahagonisperrholz

D1 Pro 20W, Mahagonisperrholz: 1 row, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
D1 Pro 20W3 mmMahagonisperrholzcut6 mm/s = 360 mm/min100%1
  • Air assist: Not specified by xTool
  • Focus: Not specified by xTool
  • Lens: Not specified by xTool
xTool, read 2026-10-02. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

D1 Pro 20W · Mandschurisches Eschensperrholz

D1 Pro 20W, Mandschurisches Eschensperrholz: 1 row, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
D1 Pro 20W3 mmMandschurisches Eschensperrholzcut4 mm/s = 240 mm/min100%1
  • Air assist: Not specified by xTool
  • Focus: Not specified by xTool
  • Lens: Not specified by xTool
xTool, read 2026-10-02. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

D1 Pro 20W · Walnusssperrholz

D1 Pro 20W, Walnusssperrholz: 2 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
D1 Pro 20W3 mmWalnusssperrholzcut4 mm/s = 240 mm/min100%1
  • Air assist: Not specified by xTool
  • Focus: Not specified by xTool
  • Lens: Not specified by xTool
xTool, read 2026-10-02. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
D1 Pro 20W6 mmWalnusssperrholzcut60 mm/s = 3600 mm/min80%1
  • Air assist: Not specified by xTool
  • Focus: Not specified by xTool
  • Lens: Not specified by xTool
xTool, read 2026-10-02. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

D1 Pro 20W · White oak plywood

D1 Pro 20W, White oak plywood: 1 row, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
D1 Pro 20W3 mmWhite oak plywoodcut5 mm/s = 300 mm/min100%1
  • Air assist: Not specified by xTool
  • Focus: Not specified by xTool
  • Lens: Not specified by xTool
xTool, read 2026-10-02. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

These values are identical to D1 Pro 20W's White oak plywood table above: both makers' documents print the same numbers.

Not specified by xTool for any row here: air assist, focus and lens; line interval on fill and engrave rows.

Source: xTool, read 2026-10-02; reviewed 2026-09-21. Document: Materialeinstellungen für xTool Maschinen.

D1 Pro 40W

D1 Pro 40W · Kiefernsperrholz

D1 Pro 40W, Kiefernsperrholz: 1 row, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
D1 Pro 40W3 mmKiefernsperrholzcut12 mm/s = 720 mm/min100%1
  • Air assist: Not specified by xTool
  • Focus: Not specified by xTool
  • Lens: Not specified by xTool
xTool, read 2026-10-02. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

D1 Pro 40W · Kirschensperrholz

D1 Pro 40W, Kirschensperrholz: 1 row, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
D1 Pro 40W3 mmKirschensperrholzcut12 mm/s = 720 mm/min100%1
  • Air assist: Not specified by xTool
  • Focus: Not specified by xTool
  • Lens: Not specified by xTool
xTool, read 2026-10-02. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

These values are identical to D1 Pro 40W's Kirschensperrholz table above: both makers' documents print the same numbers.

D1 Pro 40W · Lindensperrholz

D1 Pro 40W, Lindensperrholz: 2 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
D1 Pro 40W3 mmLindensperrholzcut13 mm/s = 780 mm/min100%1
  • Air assist: Not specified by xTool
  • Focus: Not specified by xTool
  • Lens: Not specified by xTool
xTool, read 2026-10-02. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
D1 Pro 40W8 mmLindensperrholzcut6 mm/s = 360 mm/min100%1
  • Air assist: Not specified by xTool
  • Focus: Not specified by xTool
  • Lens: Not specified by xTool
xTool, read 2026-10-02. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

D1 Pro 40W · Mandschurisches Eschensperrholz

D1 Pro 40W, Mandschurisches Eschensperrholz: 1 row, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
D1 Pro 40W3 mmMandschurisches Eschensperrholzcut12 mm/s = 720 mm/min100%1
  • Air assist: Not specified by xTool
  • Focus: Not specified by xTool
  • Lens: Not specified by xTool
xTool, read 2026-10-02. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

These values are identical to D1 Pro 40W's Mandschurisches Eschensperrholz table above: both makers' documents print the same numbers.

D1 Pro 40W · Walnusssperrholz

D1 Pro 40W, Walnusssperrholz: 1 row, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
D1 Pro 40W3 mmWalnusssperrholzcut12 mm/s = 720 mm/min100%1
  • Air assist: Not specified by xTool
  • Focus: Not specified by xTool
  • Lens: Not specified by xTool
xTool, read 2026-10-02. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

These values are identical to D1 Pro 40W's Walnusssperrholz table above: both makers' documents print the same numbers.

Every row: cut · 1 pass

Not specified by xTool for any row here: air assist, focus and lens.

Source: xTool, read 2026-10-02; reviewed 2026-09-21. Document: Materialeinstellungen für xTool Maschinen.

Material safety statements from the sources

Quoted from laser makers' documents about each material. Not a complete safety procedure.

Plywood

Fire risk, ventilate and check what the material is made of · 5 statements from Creality and Epilog Laser
  • Fire: Creality, under “Security Statement”: But most materials are inherently flammable and can be ignited, which may burn the machine and the surroundings. (Creality Falcon2 (12W/22W/40W) User Manual, read 2026-09-21)
  • Fire: Creality, under “Security Statement”: It is forbidden to leave it unattended while the machine is working. (Creality Falcon2 (12W/22W/40W) User Manual, read 2026-09-21)
  • Fire: Epilog Laser, under “Warnings and Recommendations”: Never operate the laser system unattended. (Reducing Fire Hazards with your Laser, read 2026-09-21)
  • Ventilation: Creality, under “Security Statement”: Smoke or smells may be produced during laser engraving and cutting. It is recommended to operate in a well-ventilated environment. (Creality Falcon2 (12W/22W/40W) User Manual, read 2026-09-21)
  • Check the composition: Epilog Laser, under “What happens if you engrave or cut something containing hydrogen or vinyl chloride?”: To protect your health and the life of your machine, always obtain a MSDS for materials about which you are uncertain. (Material Safety and your Laser, read 2026-09-21)

The cited safety pages name wood but not plywood or its adhesive; the Creality Falcon parameter rows print Walnut Plywood and Rosewood Plywood without a glue type.

Reviewed 2026-09-21; next review due 2026-12-20.

Common questions

Can I use a row on another machine?

Each row belongs to the stated machine and configuration. A matching wattage or material name does not establish a setting for another machine.

Why are some fields marked not specified?

The publisher’s table prints speed, power and thickness, and sometimes passes, but not air assist, focus or lens. CutChart shows each unprinted field as not specified rather than filling it in.

Why are some combinations absent?

CutChart publishes a row only when its source, exact machine, material, operation and a sourced material-safety statement meet the reference requirements. An absent row is an unknown answer.

Source documents

Sources (4)
Epilog Laser: Reducing Fire Hazards with your Laser (1 excerpt)

Reducing Fire Hazards with your Laser

Publication date not printed by Epilog Laser · Read · Captured

  1. Never operate the laser system unattended.

    Epilog Laser, Reducing Fire Hazards with your Laser, Warnings and Recommendations. Publication date not printed by Epilog Laser · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

Epilog Laser: Material Safety and your Laser (1 excerpt)

Material Safety and your Laser

Publication date not printed by Epilog Laser · Read · Captured

  1. To protect your health and the life of your machine, always obtain a MSDS for materials about which you are uncertain.

    Epilog Laser, Material Safety and your Laser, What happens if you engrave or cut something containing hydrogen or vinyl chloride?. Publication date not printed by Epilog Laser · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

Creality: Creality Falcon2 (12W/22W/40W) User Manual (3 excerpts)

Creality Falcon2 (12W/22W/40W) User Manual

Publication date not printed by Creality · Read · Captured

  1. When a laser engraver engraves or cuts materials, it casts a high-density laser beam that heats the surface to vaporize materials without burning them. But most materials are inherently flammable and can be ignited, which may burn the machine and the surroundings.

    Creality, Creality Falcon2 (12W/22W/40W) User Manual, Security Statement. Publication date not printed by Creality · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  2. 14. It is forbidden to leave it unattended while the machine is working.

    Creality, Creality Falcon2 (12W/22W/40W) User Manual, Security Statement. Publication date not printed by Creality · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  3. 11. Smoke or smells may be produced during laser engraving and cutting. It is recommended to operate in a well-ventilated environment.

    Creality, Creality Falcon2 (12W/22W/40W) User Manual, Security Statement. Publication date not printed by Creality · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

xTool: Materialeinstellungen für xTool Maschinen (34 excerpts)

Materialeinstellungen für xTool Maschinen

Publication date not printed by xTool · Read · Captured

  1. Birkensperrholz | 3.0 | Schnitt | D1 Pro 10W | 100 / 3 / 1

    xTool, Materialeinstellungen für xTool Maschinen, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  2. Birkensperrholz | 3.0 | Vektorgravur | D1 Pro 10W | 50 / 30 / 1

    xTool, Materialeinstellungen für xTool Maschinen, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  3. Birkensperrholz | 3.0 | Rastergravur | D1 Pro 10W | 80 / 100 / 1

    xTool, Materialeinstellungen für xTool Maschinen, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  4. Kiefernsperrholz | 3.0 | Schnitt | D1 Pro 10W | 100 / 4 / 2

    xTool, Materialeinstellungen für xTool Maschinen, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  5. Lindensperrholz | 3.0 | Schnitt | D1 Pro 10W | 100 / 3 / 2

    xTool, Materialeinstellungen für xTool Maschinen, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  6. Lindensperrholz | 6.0 | Schnitt | D1 Pro 10W | 100 / 2 / 4

    xTool, Materialeinstellungen für xTool Maschinen, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  7. Mahagonisperrholz | 3.0 | Schnitt | D1 Pro 10W | 100 / 4 / 3

    xTool, Materialeinstellungen für xTool Maschinen, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  8. Mandschurisches Eschensperrholz | 3.0 | Schnitt | D1 Pro 10W | 100 / 3 / 3

    xTool, Materialeinstellungen für xTool Maschinen, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  9. Walnusssperrholz | 3.0 | Schnitt | D1 Pro 10W | 100 / 3 / 1

    xTool, Materialeinstellungen für xTool Maschinen, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  10. Walnusssperrholz | 3.0 | Vektorgravur | D1 Pro 10W | 50 / 30 / 1

    xTool, Materialeinstellungen für xTool Maschinen, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  11. Walnusssperrholz | 3.0 | Rastergravur | D1 Pro 10W | 80 / 100 / 1

    xTool, Materialeinstellungen für xTool Maschinen, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  12. Walnusssperrholz | 6.0 | Schnittt | D1 Pro 10W | 80 / 60 / 1

    xTool, Materialeinstellungen für xTool Maschinen, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  13. White oak plywood | 3.0 | Schnitt | D1 Pro 10W | 100 / 3 / 2

    xTool, Materialeinstellungen für xTool Maschinen, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  14. Birkensperrholz | 3.0 | Schnitt | D1 Pro 20W | 100 / 6 / 1

    xTool, Materialeinstellungen für xTool Maschinen, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  15. Birkensperrholz | 6.0 | Schnitt | D1 Pro 20W | 100 / 4 / 3

    xTool, Materialeinstellungen für xTool Maschinen, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  16. Kiefernsperrholz | 3.0 | Schnitt | D1 Pro 20W | 100 / 5 / 1

    xTool, Materialeinstellungen für xTool Maschinen, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  17. Lindensperrholz | 3.0 | Schnitt | D1 Pro 20W | 100 / 6 / 1

    xTool, Materialeinstellungen für xTool Maschinen, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  18. Lindensperrholz | 3.0 | Vektorgravur | D1 Pro 20W | 80 / 60 / 1

    xTool, Materialeinstellungen für xTool Maschinen, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  19. Lindensperrholz | 3.0 | Rastergravur | D1 Pro 20W | 60 / 100 / 1

    xTool, Materialeinstellungen für xTool Maschinen, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  20. Lindensperrholz | 6.0 | Schnitt | D1 Pro 20W | 100 / 6 / 3

    xTool, Materialeinstellungen für xTool Maschinen, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  21. Mahagonisperrholz | 3.0 | Schnitt | D1 Pro 20W | 100 / 6 / 1

    xTool, Materialeinstellungen für xTool Maschinen, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  22. Mandschurisches Eschensperrholz | 3.0 | Schnitt | D1 Pro 20W | 100 / 4 / 1

    xTool, Materialeinstellungen für xTool Maschinen, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  23. Walnusssperrholz | 3.0 | Schnitt | D1 Pro 20W | 100 / 4 / 1

    xTool, Materialeinstellungen für xTool Maschinen, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  24. Walnusssperrholz | 6.0 | Schnitt | D1 Pro 20W | 80 / 60 / 1

    xTool, Materialeinstellungen für xTool Maschinen, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  25. White oak plywood | 3.0 | Schnitt | D1 Pro 20W | 100 / 5 / 1

    xTool, Materialeinstellungen für xTool Maschinen, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  26. Kiefernsperrholz | 3.0 | Schnitt | D1 Pro 40W | 100 / 12 / 1

    xTool, Materialeinstellungen für xTool Maschinen, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  27. Kirschensperrholz | 3.0 | Schnitt | D1 Pro 40W | 100 / 12 / 1

    xTool, Materialeinstellungen für xTool Maschinen, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  28. Lindensperrholz | 3.0 | Schnitt | D1 Pro 40W | 100 / 13 / 1

    xTool, Materialeinstellungen für xTool Maschinen, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  29. Lindensperrholz | 8.0 | Schnitt | D1 Pro 40W | 100 / 6 / 1

    xTool, Materialeinstellungen für xTool Maschinen, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  30. Mandschurisches Eschensperrholz | 3.0 | Schnitt | D1 Pro 40W | 100 / 12 / 1

    xTool, Materialeinstellungen für xTool Maschinen, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  31. Walnusssperrholz | 3.0 | Schnitt | D1 Pro 40W | 100 / 12 / 1

    xTool, Materialeinstellungen für xTool Maschinen, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  32. Kirschensperrholz | 3.0 | Schnitt | D1 Pro 5W | 100 / 2 / 2

    xTool, Materialeinstellungen für xTool Maschinen, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  33. Lindensperrholz | 3.0 | Schnitt | D1 Pro 5W | 100 / 2 / 2

    xTool, Materialeinstellungen für xTool Maschinen, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  34. Walnusssperrholz | 3.0 | Schnitt | D1 Pro 5W | 100 / 4 / 3

    xTool, Materialeinstellungen für xTool Maschinen, xTool D1 Pro. Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

Cite this page: xTool D1 Pro Settings for Plywood: 3 to 8 mm. CutChart. https://cutchart.com/settings/plywood/xtool-d1-pro/ (sources read 2026-10-02).

Reference information only. Follow the instructions for your exact machine and material. A listed setting does not establish that a job is safe. Read the safety limits.