CutChart.

Ortur LU2-10A Settings for Plywood: 1.6 to 10 mm

Ortur documents 5 speed and power settings for plywood on the LU2-10A (10W). CutChart has not tested them; it read the maker’s documents on 2026-09-21.

Diode only · safety ↓ · sources ↓

Source-documented settings for plywood on the LU2-10A (10W)

About these numbers

Manufacturer-published reference parameters, not tested by CutChart

Speed: the figure the publisher printed, in bold, with the other unit converted under it. Type the number whose unit matches the speed box in your laser software. Not sure? Convert it here.

LU2-10A (10W) · Plywood · cut

Source-documented settings: 5 rows, each with the thickness its publisher printed.
MachineThicknessMaterial as printedOperationSpeedPowerPassesNot printed by the publisherSource
LU2-10A (10W)1.6 mmPlywoodcut500 mm/min (8.33 mm/s)100%1
  • Air assist: Not specified by Ortur
  • Focus: Not specified by Ortur
  • Lens: Not specified by Ortur
Ortur, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
LU2-10A (10W)2.8 mmPlywoodcut300 mm/min (5 mm/s)100%1
  • Air assist: Not specified by Ortur
  • Focus: Not specified by Ortur
  • Lens: Not specified by Ortur
Ortur, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
LU2-10A (10W)5 mmPlywoodcut300 mm/min (5 mm/s)100%1
  • Air assist: Not specified by Ortur
  • Focus: Not specified by Ortur
  • Lens: Not specified by Ortur
Ortur, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
LU2-10A (10W)8 mmPlywoodcut100 mm/min (1.67 mm/s)100%1
  • Air assist: Not specified by Ortur
  • Focus: Not specified by Ortur
  • Lens: Not specified by Ortur
Ortur, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.
LU2-10A (10W)10 mmPlywoodcut100 mm/min (1.67 mm/s)100%8
  • Air assist: Not specified by Ortur
  • Focus: Not specified by Ortur
  • Lens: Not specified by Ortur
Ortur, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21.

Not specified by Ortur: air assist, focus and lens.

Source: Ortur, read 2026-09-21; reviewed 2026-09-21. Document: Ortur LightBurn Material Settings.

Material safety statements from the sources

Quoted from laser makers' documents about each material. Not a complete safety procedure.

Plywood

Fire risk, ventilate and check what the material is made of · 5 statements from Creality and Epilog Laser
  • Fire: Creality, under “Security Statement”: But most materials are inherently flammable and can be ignited, which may burn the machine and the surroundings. (Creality Falcon2 (12W/22W/40W) User Manual, read 2026-09-21)
  • Fire: Creality, under “Security Statement”: It is forbidden to leave it unattended while the machine is working. (Creality Falcon2 (12W/22W/40W) User Manual, read 2026-09-21)
  • Fire: Epilog Laser, under “Warnings and Recommendations”: Never operate the laser system unattended. (Reducing Fire Hazards with your Laser, read 2026-09-21)
  • Ventilation: Creality, under “Security Statement”: Smoke or smells may be produced during laser engraving and cutting. It is recommended to operate in a well-ventilated environment. (Creality Falcon2 (12W/22W/40W) User Manual, read 2026-09-21)
  • Check the composition: Epilog Laser, under “What happens if you engrave or cut something containing hydrogen or vinyl chloride?”: To protect your health and the life of your machine, always obtain a MSDS for materials about which you are uncertain. (Material Safety and your Laser, read 2026-09-21)

The cited safety pages name wood but not plywood or its adhesive; the Creality Falcon parameter rows print Walnut Plywood and Rosewood Plywood without a glue type.

Reviewed 2026-09-21; next review due 2026-12-20.

Common questions

Can I use a row on another machine?

Each row belongs to the stated machine and configuration. A matching wattage or material name does not establish a setting for another machine.

Why are some fields marked not specified?

The publisher’s table prints speed, power and thickness, and sometimes passes, but not air assist, focus or lens. CutChart shows each unprinted field as not specified rather than filling it in.

Why are some combinations absent?

CutChart publishes a row only when its source, exact machine, material, operation and a sourced material-safety statement meet the reference requirements. An absent row is an unknown answer.

Source documents

Sources (4)
Epilog Laser: Reducing Fire Hazards with your Laser (1 excerpt)

Reducing Fire Hazards with your Laser

Publication date not printed by Epilog Laser · Read · Captured

  1. Never operate the laser system unattended.

    Epilog Laser, Reducing Fire Hazards with your Laser, Warnings and Recommendations. Publication date not printed by Epilog Laser · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

Epilog Laser: Material Safety and your Laser (1 excerpt)

Material Safety and your Laser

Publication date not printed by Epilog Laser · Read · Captured

  1. To protect your health and the life of your machine, always obtain a MSDS for materials about which you are uncertain.

    Epilog Laser, Material Safety and your Laser, What happens if you engrave or cut something containing hydrogen or vinyl chloride?. Publication date not printed by Epilog Laser · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

Creality: Creality Falcon2 (12W/22W/40W) User Manual (3 excerpts)

Creality Falcon2 (12W/22W/40W) User Manual

Publication date not printed by Creality · Read · Captured

  1. When a laser engraver engraves or cuts materials, it casts a high-density laser beam that heats the surface to vaporize materials without burning them. But most materials are inherently flammable and can be ignited, which may burn the machine and the surroundings.

    Creality, Creality Falcon2 (12W/22W/40W) User Manual, Security Statement. Publication date not printed by Creality · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  2. 14. It is forbidden to leave it unattended while the machine is working.

    Creality, Creality Falcon2 (12W/22W/40W) User Manual, Security Statement. Publication date not printed by Creality · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  3. 11. Smoke or smells may be produced during laser engraving and cutting. It is recommended to operate in a well-ventilated environment.

    Creality, Creality Falcon2 (12W/22W/40W) User Manual, Security Statement. Publication date not printed by Creality · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

Ortur: Ortur LightBurn Material Settings (5 excerpts)

Ortur LightBurn Material Settings

Publication date not printed by Ortur · Read · Captured

  1. Image Mode: Line Speed(mm/m): 100mm Power Min(%): 100 Perform Multiple Passes: 8

    Ortur, Ortur LightBurn Material Settings, LightBurn Settings for Cutting. Publication date not printed by Ortur · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  2. Image Mode: Line Speed(mm/m): 500mm Power Min(%): 100 Perform Multiple Passes: 1

    Ortur, Ortur LightBurn Material Settings, LightBurn Settings for Cutting. Publication date not printed by Ortur · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  3. Image Mode: Line Speed(mm/m): 300mm Power Min(%): 100 Perform Multiple Passes: 1

    Ortur, Ortur LightBurn Material Settings, LightBurn Settings for Cutting. Publication date not printed by Ortur · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  4. Image Mode: Line Speed(mm/m): 300mm Power Min(%): 100 Perform Multiple Passes: 1

    Ortur, Ortur LightBurn Material Settings, LightBurn Settings for Cutting. Publication date not printed by Ortur · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  5. Image Mode: Line Speed(mm/m): 100mm Power Min(%): 100 Perform Multiple Passes: 1

    Ortur, Ortur LightBurn Material Settings, LightBurn Settings for Cutting. Publication date not printed by Ortur · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

Cite this page: Ortur LU2-10A Settings for Plywood: 1.6 to 10 mm. CutChart. https://cutchart.com/settings/plywood/ortur-lu2-10a/ (sources read 2026-09-21).

Reference information only. Follow the instructions for your exact machine and material. A listed setting does not establish that a job is safe. Read the safety limits.