Monport ONYX-R Settings for Leather: 1.5 mm
Monport documents 2 speed and power settings for leather on the ONYX-R. CutChart has not tested them; it read the maker’s documents on 2026-09-21.
CO2 only · safety ↓ · sources ↓
Source-documented settings for leather on the ONYX-R
About these numbers
Manufacturer-published reference parameters, not tested by CutChart
Speed: the figure the publisher printed, in bold, with mm/min converted under it. Type the number whose unit matches the speed box in your laser software. Not sure? Convert it here.
ONYX-R · Leather · 1.5 mm
| Machine | Thickness | Material as printed | Operation | Speed | Power | Passes | Not printed by the publisher | Source |
|---|---|---|---|---|---|---|---|---|
| ONYX-R | 1.5 mm | Leather | cut | 80 mm/s = 4800 mm/min | 90% | Not specified by Monport |
| Monport, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
| ONYX-R | 1.5 mm | Leather | engrave | 500 mm/s = 30000 mm/min | 30% | Not specified by Monport |
| Monport, read 2026-09-21. Manufacturer-published reference parameters, not tested by CutChart; reviewed 2026-09-21. |
Not specified by Monport: passes, air assist, focus and lens; line interval on engrave rows.
Source: Monport, read 2026-09-21; reviewed 2026-09-21. Document: Model ONYX-R.
Material safety statements from the sources
Quoted from laser makers' documents about each material. Not a complete safety procedure.
Leather
Trotec Laser, under “Materials you should not process with a laser”: Leather and artificial leather that contains chromium (VI)
Caution: Hazard, check what the material is made of, ventilate and fire risk · 6 statements from Creality, Epilog Laser and Trotec Laser
- Hazard: Trotec Laser, under “Materials you should not process with a laser”:
There are some materials that should not be processed with a laser engraver or a laser cutter because of their chemical make-up. Processing these materials creates dangerous gases or dust.
(Which materials are not suitable for laser cutting and engraving?, read 2026-09-21) - Fire: Creality, under “Security Statement”:
It is forbidden to leave it unattended while the machine is working.
(Creality Falcon2 (12W/22W/40W) User Manual, read 2026-09-21) - Ventilation: Creality, under “Security Statement”:
Smoke or smells may be produced during laser engraving and cutting. It is recommended to operate in a well-ventilated environment.
(Creality Falcon2 (12W/22W/40W) User Manual, read 2026-09-21) - Check the composition: Trotec Laser, under “Materials you should not process with a laser”:
Leather and artificial leather that contains chromium (VI)
(Which materials are not suitable for laser cutting and engraving?, read 2026-09-21) - Check the composition: Creality, under “Parameters”:
Cardboard, wood, bamboo, rubber, leather, fabric, acrylic, plastic, etc.
(Creality Falcon2 (12W/22W/40W) User Manual, read 2026-09-21) - Check the composition: Epilog Laser, under “What happens if you engrave or cut something containing hydrogen or vinyl chloride?”:
To protect your health and the life of your machine, always obtain a MSDS for materials about which you are uncertain.
(Material Safety and your Laser, read 2026-09-21)
Tanning method not stated by Creality Falcon.
Reviewed 2026-09-21; next review due 2026-12-20.
Common questions
Can I use a row on another machine?
Each row belongs to the stated machine and configuration. A matching wattage or material name does not establish a setting for another machine.
Why are some fields marked not specified?
The publisher’s table prints speed, power and thickness, and sometimes passes, but not air assist, focus or lens. CutChart shows each unprinted field as not specified rather than filling it in.
Why are some combinations absent?
CutChart publishes a row only when its source, exact machine, material, operation and a sourced material-safety statement meet the reference requirements. An absent row is an unknown answer.
Source documents
Sources (4)
Epilog Laser: Material Safety and your Laser (1 excerpt)
Material Safety and your Laser
Publication date not printed by Epilog Laser · Read · Captured
To protect your health and the life of your machine, always obtain a MSDS for materials about which you are uncertain.
Epilog Laser, Material Safety and your Laser, What happens if you engrave or cut something containing hydrogen or vinyl chloride?. Publication date not printed by Epilog Laser · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Creality: Creality Falcon2 (12W/22W/40W) User Manual (3 excerpts)
Creality Falcon2 (12W/22W/40W) User Manual
Publication date not printed by Creality · Read · Captured
Cardboard, wood, bamboo, rubber, leather, fabric, acrylic, plastic, etc.
Creality, Creality Falcon2 (12W/22W/40W) User Manual, Parameters. Publication date not printed by Creality · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
14. It is forbidden to leave it unattended while the machine is working.
Creality, Creality Falcon2 (12W/22W/40W) User Manual, Security Statement. Publication date not printed by Creality · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
11. Smoke or smells may be produced during laser engraving and cutting. It is recommended to operate in a well-ventilated environment.
Creality, Creality Falcon2 (12W/22W/40W) User Manual, Security Statement. Publication date not printed by Creality · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Monport: Model ONYX-R (2 excerpts)
Publication date not printed by Monport · Read · Captured
Attachment 1 Material Acrylic Basswood Canvas Cardboard Leather MDF Power (W) 50% 50% 25% 45% 30% 40% Engraving Speed 500 500 500 500 500 500 (mm/s) 100% 100% 100% 100% 100% 100% Power (W) 90% 90% 60% 90% 90% 90% Cutting Speed 35 65 350 200 80 30 (mm/s) 7% 13% 70% 40% 16% 6% Rec. Thickness (mm) 3 3 0.2 2 1.5 3 Resolution (dpi) 400 400 300 400 400 300
Monport, Model ONYX-R, Attachment 1. Publication date not printed by Monport · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Attachment 1 Material Acrylic Basswood Canvas Cardboard Leather MDF Power (W) 50% 50% 25% 45% 30% 40% Engraving Speed 500 500 500 500 500 500 (mm/s) 100% 100% 100% 100% 100% 100% Power (W) 90% 90% 60% 90% 90% 90% Cutting Speed 35 65 350 200 80 30 (mm/s) 7% 13% 70% 40% 16% 6% Rec. Thickness (mm) 3 3 0.2 2 1.5 3 Resolution (dpi) 400 400 300 400 400 300
Monport, Model ONYX-R, Attachment 1. Publication date not printed by Monport · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Trotec Laser: Which materials are not suitable for laser cutting and engraving? (2 excerpts)
Which materials are not suitable for laser cutting and engraving?
Publication date not printed by Trotec Laser · Read · Captured
Leather and artificial leather that contains chromium (VI)
Trotec Laser, Which materials are not suitable for laser cutting and engraving?, Materials you should not process with a laser. Publication date not printed by Trotec Laser · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
There are some materials that should not be processed with a laser engraver or a laser cutter because of their chemical make-up. Processing these materials creates dangerous gases or dust.
Trotec Laser, Which materials are not suitable for laser cutting and engraving?, Materials you should not process with a laser. Publication date not printed by Trotec Laser · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Cite this page: Monport ONYX-R Settings for Leather: 1.5 mm. CutChart. https://cutchart.com/settings/leather/monport-onyx-55/ (sources read 2026-09-21).
Reference information only. Follow the instructions for your exact machine and material. A listed setting does not establish that a job is safe. Read the safety limits.