CutChart.

Falcon2 40W vs xTool S1 40W: Documented Power Compared

CutChart compares the Falcon2 40W (Normal mode) and the xTool S1 40W blue module, read 2026-09-21. Creality Falcon states 40 W optical with 240 W machine power. xTool states 40 W as maximum power at 455 nm and publishes no input figure. CutChart has not tested either configuration.

On this page

Documented facts, side by side

Documented fieldFalcon2 40W (Normal mode)xTool S1 40W blue module
Laser watts, on the basis printed by the maker40 W (Optical Power)40 W (Maximum Power (455 nm, continuous wave))
Electrical input watts240 W (Machine Power (MAX))Not published by the manufacturer
Marketed watts40 W (Laser Model)40 W (Laser power)
Rating basis stated by the makerOptical PowerMaximum laser power at 455 nm; manufacturer specification
ControllerNot published by the manufacturerNot published by the manufacturer
Working areaNot published in the records behind this pageNot published in the records behind this page
PriceNo verified price record on this siteNo verified price record on this site

Full settings and sources for each machine: Falcon2 40W (Normal mode) and xTool S1 40W blue module.

Documented settings coverage

CoverageFalcon2 40W (Normal mode)xTool S1 40W blue module
Admitted settings rows516
Materials with rows92
Operations with rowscut, engravecut
Thickness range in rows0.15 to 15 mm3 to 15 mm

A row count describes the published tables, not cutting performance.

Who each configuration suits

Falcon2 40W (Normal mode)

You want the 40W configuration whose maker also publishes a machine power figure and a 51-row settings table.

Not a fit when: Your choice depends on price, working area or controller. Neither maker publishes those fields in the records behind this page.

xTool S1 40W blue module

You want the 40W module whose maker states its power as a maximum at 455 nm, with its six admitted cutting rows.

Not a fit when: Your choice depends on price, working area or controller. Neither maker publishes those fields in the records behind this page.

What this comparison cannot decide

Neither maker publishes a working area, controller or verified price in the records behind this page, so this comparison cannot rank size, control hardware or value. It also cannot say which configuration cuts faster or cleaner. CutChart has not tested either machine, and the safety limits apply to every material named in the settings rows. Check any watt label with the optical-watt decoder before relying on it.

Common questions

Which of these two should I buy?

This page does not name a winner. It puts the power figures and settings rows each maker published side by side, and marks every field a maker did not publish. A choice that turns on price, working area or controller needs evidence this page does not carry.

Why do the watt figures use different labels?

Each maker prints its own basis. The table keeps the printed label beside the number, so an optical figure is never read as a marketed label, and a marketed label is never read as a measurement.

Where do these figures come from?

From the maker documents listed under Source documents, read on the dates shown there. CutChart has not bought or run either machine, so no figure here comes from firsthand use.

Source documents

Sources (2)
Creality Falcon: CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings (3 excerpts)

CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings

Publication date: 2023-12-23 · Read · Captured

  1. Optical Power | 12W | 22W | 40W

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon 2 12W/22W/40W Laser Engraver & Cutter Specs. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  2. Machine Power (MAX) | 120W | 120W | 240W

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon 2 12W/22W/40W Laser Engraver & Cutter Specs. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

  3. Laser Source | Diode Laser

    Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon 2 12W/22W/40W Laser Engraver & Cutter Specs. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

xTool: xTool S1 LSO Training (1 excerpt)

xTool S1 LSO Training

Publication date not printed by xTool · Read · Captured

  1. Maximum Power | 10 W | 20 W | 40 W

    xTool, xTool S1 LSO Training, xTool S1 Laser Standard Operating Procedure (SOP). Publication date not printed by xTool · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.

Reference information only. Follow the instructions for your exact machine and material. A listed setting does not establish that a job is safe. Read the safety limits.