Falcon2 22W vs 40W: Documented Power Compared
CutChart compares the Falcon2 22W and 40W (Normal mode) configurations on the power figures Creality Falcon published, read 2026-09-21: 22 W optical at 120 W machine power against 40 W optical at 240 W. The 40W side carries 51 documented settings rows, the 22W side 50. CutChart has not tested either configuration.
On this page
Documented facts, side by side
| Documented field | Falcon2 22W | Falcon2 40W (Normal mode) |
|---|---|---|
| Laser watts, on the basis printed by the maker | 22 W (Optical Power) | 40 W (Optical Power) |
| Electrical input watts | 120 W (Machine Power (MAX)) | 240 W (Machine Power (MAX)) |
| Marketed watts | 22 W (Laser Model) | 40 W (Laser Model) |
| Rating basis stated by the maker | Optical Power | Optical Power |
| Controller | Not published by the manufacturer | Not published by the manufacturer |
| Working area | Not published in the records behind this page | Not published in the records behind this page |
| Price | No verified price record on this site | No verified price record on this site |
Full settings and sources for each machine: Falcon2 22W and Falcon2 40W (Normal mode).
Documented settings coverage
| Coverage | Falcon2 22W | Falcon2 40W (Normal mode) |
|---|---|---|
| Admitted settings rows | 50 | 51 |
| Materials with rows | 9 | 9 |
| Operations with rows | cut, engrave | cut, engrave |
| Thickness range in rows | 0.15 to 10 mm | 0.15 to 15 mm |
A row count describes the published tables, not cutting performance.
Who each configuration suits
Falcon2 22W
You want the lower documented optical power and machine power in this Falcon2 pair.
Not a fit when: You need price, working area or controller evidence, or a documented figure above 22 W optical.
Falcon2 40W (Normal mode)
You want the highest documented optical power Creality Falcon prints for the Falcon2, and its wider thickness range in the settings table.
Not a fit when: You need price, working area or controller evidence, or the lower 120 W machine power of the 22W side.
What this comparison cannot decide
Neither maker publishes a working area, controller or verified price in the records behind this page, so this comparison cannot rank size, control hardware or value. It also cannot say which configuration cuts faster or cleaner. CutChart has not tested either machine, and the safety limits apply to every material named in the settings rows. Check any watt label with the optical-watt decoder before relying on it.
Common questions
Which of these two should I buy?
This page does not name a winner. It puts the power figures and settings rows each maker published side by side, and marks every field a maker did not publish. A choice that turns on price, working area or controller needs evidence this page does not carry.
Why do the watt figures use different labels?
Each maker prints its own basis. The table keeps the printed label beside the number, so an optical figure is never read as a marketed label, and a marketed label is never read as a measurement.
Where do these figures come from?
From the maker documents listed under Source documents, read on the dates shown there. CutChart has not bought or run either machine, so no figure here comes from firsthand use.
Source documents
Sources (1)
Creality Falcon: CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings (3 excerpts)
CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings
Publication date: 2023-12-23 · Read · Captured
Optical Power | 12W | 22W | 40W
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon 2 12W/22W/40W Laser Engraver & Cutter Specs. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Machine Power (MAX) | 120W | 120W | 240W
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon 2 12W/22W/40W Laser Engraver & Cutter Specs. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Laser Source | Diode Laser
Creality Falcon, CrealityFalcon 2 Laser Engraving & Cutting Parameter Settings, Falcon 2 12W/22W/40W Laser Engraver & Cutter Specs. Publication date: 2023-12-23 · Read · Captured . Read the named field and section in the cited document. The excerpt alone does not establish a complete cutting procedure.
Reference information only. Follow the instructions for your exact machine and material. A listed setting does not establish that a job is safe. Read the safety limits.

